Is it possible to use the Oracle HAIP feature to bond multiple network links between Active and Standby database ?
Does this require a seperate license ?
Basically, I was looking for a solution for bonding the muliple WAN links that we have between the active and Standby database.
how to insert the data in multiple bases( Same table structure in different bases) using the multiple database links?
View 4 Replies View Relatedthe thread title was a bit confusing, couldn't come up with anything short to describe the question. What I am looking for is a query which will put records into groups based on matching values in one of two columns. So if two records have a matching value in column 1 or column 2 they are in the same group. See the example bellow and expected output for a "better" explanation:
--setup
CREATE TABLE foo
(foo_id NUMBER NOT NULL PRIMARY KEY,
record_number NUMBER,
record_value VARCHAR2(1));
[Code]...
--expected output
group# foo_id record_number record_value
1 1 1 A
1 2 1 B
1 3 2 B
1 4 2 C
2 5 3 D
3 6 4 E
3 7 5 E
My initial thought is that is feels a little bit like the sequential seat problem but not quite close enough. I know it could be done iteratively with PL/SQL but I am thinking there must be a way to do it in SQL I am not seeing yet.
I wanted to know whether we can configure single data guard for multiple database (instances), has this been done anytime in the past .
We are a small business and growing at rapid rate. we want to cut down the cost at the same time.
Any other method or approach that is practical and economical to synchronise database between multiple production system into centralised DR system.
I am trying to retrieve info from multiple DBs and insert into a central DB via DB LINKS.The links are retrieved via a cursor.
However I keep coming up against 'PL/SQL: ORA-00942: table or view does not exist'..how to handle db_links using a cursor in a pl/sql block? The code is as follows:
DECLARE
db_link_rec VARCHAR2(30);
CURSOR db_link_cur IS
SELECT DB_LINK
from MESSAGING_PROD_LIST;
BEGIN
OPEN db_link_cur;
LOOP
FETCH db_link_cur INTO db_link_rec;
EXIT when db_link_cur%NOTFOUND;
[code]....
We have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
View 3 Replies View RelatedA website requires to display consolidated data from databases located in different geographical regions (India, London and New York). The application server for the website is hosted only in one location India. What are the techniques that can be used for faster retrieval of data from all 3 databases?
Note: There is no need of real time data retrieval from different regions; however the user should able to view the updated data at predefined intervals.
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
I want to change dbname,sid,data/control file locations in operational dataguard setup i plan to follow as below
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
If this steps will error free do i need to follow any thing additional to this or what is other best way for this or its not possible at all
Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- -------------------
Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2
End Snap: 18613 21-Feb-13 23:00:02 237 2.1
Elapsed: 60.00 (mins)
[code]...
Why there could sudden spike of demand on UNDO data in Active Data Guard ?
I am working in a bank as an system consultant, i have a SAN Storage Area and oracle as below.
SAN 1
This interface includes the DATA FILES of the oracle tablespace
SAN 2
SAN1 Mirrors the DATA FILES of the oracle tablespace to SAN 2
1. Can i rely on real time data recovery from SAN2 ?
2. if SAN1 (Data Files are currupted) will the SAN2 Data Files will be currupted as well.
3. If the SAN2 is currupted then what Oracle Features can be used to have uncurrupted data.
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF'
ORA-27041: unable to open file
OSD-04002: غير قادر على فتح الملف
O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME
--------------------------------------------------------------------------------
D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
D:ORACLEAPPADMINISTRATORORADATAMFSREDO02.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSREDO03.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
Our organization has recently decided to go for storage metro cluster solution for disaster recovery. In a Data guard environment, we normally calculate how much archive log is generating and based on that value we calculate the required bandwidth.
For storage metro cluster, we need to find how much block is changing in our primary database, and the same rate of change would apply on DR cluster. Now, i need to give the assumption how much changing is happening in my system. How to calculate the change.
i'm using a mixture of Oracle� Data Guard Concepts and Administration11g Release 1 (11.1) And Bulletin : MAA - Creating a RAC Physical Standby for a RAC Primary 10g ( on oracle support) But neither is comprehensive for what i'm trying to do.
setting up Data Guard Broker on a RAC Data Guard environment?
i want to use more than four db links in my stored procedure to retrieve data from different databases. but it says ORA-02020: too many database links are opened. i also wrote execute immediate to close some links but its not working.
View 16 Replies View RelatedWe have two databases A and B, both are 10g Enterprise edition and we have to replicate only one table from A to B. A is the source and B needs a read only copy. The source of A is modified by User through Oracle Forms.
A latency of 1day can be accepted though the lesser the better. The problem is that this company does not approve of DB links in any form or any tool which in the end has to create a DB link.
I am very new to data guard...I have a primary and a physical standby database...If the primary got crashed, are the users directly switched to physical standyby (is it automated) or the DBA has to manually do the fail over or switch over....is it the same concept as in RAC like TAF....How can the DBA know that the users are disconnected from the database.....explain with some steps...
the version is 10.2.0...
Log shipping stopped logging/shipping into the Standby Database in one of our Oracle Data Guard Servers about two month ago and there was no change carried out as at that time. The Data Guard has only one Standby database. I have been managing the log shipping and recovery manually.
View 1 Replies View RelatedI want to implement data guard on same PC.
View 1 Replies View RelatedI did upgrade from 10.2.0.1 to 10.2.0.4 on the secondary database , the primary database version is 10.2.0.4,i took cold backup from the primary to the secondary database , when i try to create control file on the secondary , i am getting this ORA-01130: database file version 10.2.0.3.0 incompatiable with ORACLE version 10.2.0.1.0.*
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Seemingly a very simple problem, but I can't seem to figure it out. Table below is a table that holds UserId' s and LinkId's.
CREATE TABLE UserLink (UserId NUMBER, LinkId NUMBER );
ALTER TABLE UserLink ADD PRIMARY KEY (UserId, LinkId);
INSERT INTO UserLink VALUES (1, 1);
INSERT INTO UserLink VALUES (1, 2);
INSERT INTO UserLink VALUES (3, 1);
INSERT INTO UserLink VALUES (4, 1);
I'm looking for a query in which I can plug a List of LinkId's that outputs only users that have a relationship with ALL LinkId's provided. In this example you may assume that the List is equal to (1, 2), but you can't make any assumptions about the size of the list, other than size != 0. The query to find users that match ANY of the provided LinkId's is quite simple:
SELECT UserId FROM UserLink
WHERE LinkId IN (1,2)
The correct query should output:
USERID
------
1
And it should work for any size > 0 list of values.
I'm trying to prepare data guard operation on the virtual machines.
1. I have install Oracle database without start up database on the standby server.
2. I try to connect this db by sysdba, but failed!
Quote:
C:>sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I'm using instruction below: [URL]
Why I can't login to database?
I have to implement Physical standby using same SID. parameters required to set on Primary and standby. Also what entries are required to do in TNS file. Recently we have faced hardware failure.
View 10 Replies View Relatedhow to check dataguard synchronization?
View 2 Replies View RelatedI am working on Data Guard concepts. I have configured Data Guard which is working fine.
Now I am trying to work on script which can give me output on OS prompt if there are any archive gaps..
I tried to use few commands on a script archgap.sh as
archgap.sh
sqlplus "/ as sysdba"
select * from v$archive_gap;
I am trying to run above script on OS prompt as
ABC:/home/oracle>sh archgap.sh
but I am not getting output ... I want it a way that this script should run within interval of 5 min and give output on OS prompt.
tell me about data guard accommodate with 11g database standard additions or not if no,is there any way to make it working under this edition?one more thing may i have the steps of configuration data guard in real time for anew server.
View 5 Replies View Related