i want to use more than four db links in my stored procedure to retrieve data from different databases. but it says ORA-02020: too many database links are opened. i also wrote execute immediate to close some links but its not working.
View 16 RepliesWe have two databases A and B, both are 10g Enterprise edition and we have to replicate only one table from A to B. A is the source and B needs a read only copy. The source of A is modified by User through Oracle Forms.
A latency of 1day can be accepted though the lesser the better. The problem is that this company does not approve of DB links in any form or any tool which in the end has to create a DB link.
Seemingly a very simple problem, but I can't seem to figure it out. Table below is a table that holds UserId' s and LinkId's.
CREATE TABLE UserLink (UserId NUMBER, LinkId NUMBER );
ALTER TABLE UserLink ADD PRIMARY KEY (UserId, LinkId);
INSERT INTO UserLink VALUES (1, 1);
INSERT INTO UserLink VALUES (1, 2);
INSERT INTO UserLink VALUES (3, 1);
INSERT INTO UserLink VALUES (4, 1);
I'm looking for a query in which I can plug a List of LinkId's that outputs only users that have a relationship with ALL LinkId's provided. In this example you may assume that the List is equal to (1, 2), but you can't make any assumptions about the size of the list, other than size != 0. The query to find users that match ANY of the provided LinkId's is quite simple:
SELECT UserId FROM UserLink
WHERE LinkId IN (1,2)
The correct query should output:
USERID
------
1
And it should work for any size > 0 list of values.
Basically, we have 2 procedures in 2 different databases. One of them makes a call to the other over a database link passing an associative array as a parameters.
This has woked fine for many years 9.2.0.8.0 but we are in the process of migrating to 11.2.0.2.0 and have started getting compilation errors.
1 > Create TYPE in Database_1
=====================
CREATE OR REPLACE PACKAGE DB1_Pkg
IS
type x_tab is table of number index by binary_integer;
v_tab x_tab;
END DB1_Pkg;
[code]....
How can I determine what views have a dblink hard coded in them? I am talking about a large number of views so bringing up each view's DDL in a GUI data dictionary tool to look is not an option. I tried running the query below unfortunately "text" is a LONG and doesn't allow the use of the "like" statement.
select * from dba_views where text like '%@%' ;
the thread title was a bit confusing, couldn't come up with anything short to describe the question. What I am looking for is a query which will put records into groups based on matching values in one of two columns. So if two records have a matching value in column 1 or column 2 they are in the same group. See the example bellow and expected output for a "better" explanation:
--setup
CREATE TABLE foo
(foo_id NUMBER NOT NULL PRIMARY KEY,
record_number NUMBER,
record_value VARCHAR2(1));
[Code]...
--expected output
group# foo_id record_number record_value
1 1 1 A
1 2 1 B
1 3 2 B
1 4 2 C
2 5 3 D
3 6 4 E
3 7 5 E
My initial thought is that is feels a little bit like the sequential seat problem but not quite close enough. I know it could be done iteratively with PL/SQL but I am thinking there must be a way to do it in SQL I am not seeing yet.
I've begun experiencing a very odd issue with one instance and all of their their db links. When I'm connected via telnet to the unix server, and I connect:
connect myuser/password via sql plus, I connect fine, and the link works.
but when I connect this way:
connect myuser/password@db.tnsname.entry.com using the TNS name specified, I again connect fine but the link calls fails with a TNS cannot resolve service name issue.
This is an existing instance with existing db links, but I repeat the issue on this machine alone with new links. the fully qualified name is the same name entry I'm using to create the link, both when it succeeds and when it fails. This is an 11g instance and the TNSnames file is in the ASM home.Also, i f I connect
connect sys as sysdba I get success as well. This behavior happens with both private and public database links. I'm not aware of any setting changes within this instance, and I've modified (after backing up) the TNSNames file with values from another that works perfectly well. Connecting via remote sqlplus or other JDBC connections gives the same error. Success connecting locally but failure connecting to DB Links when I'm remote. Connecting to the instance shows no issue.
Another instance on the network? An IP config issue in DNS? We have 100's of servers so it's needle in a haystack time. Can I run some sort of trace to see what it's calling to when it works and when it doesn't? (It selects another db's single table and I've confirmed the target is correct and the data is correct).
I have a view called V_MEDGEN_LISTRADIO but I can't run SELECT * FROM V_MEDGEN_LISTRADIO
ORA-02020: too many database links in useThe cause is that we call in the view 5 tables over dblink and the open_links parameter is set to 4.
What is strange is that when I run this select by adding a where clause then it works!
SELECT * FROM V_MEDGEN_LISTRADIO WHERE SPRR = 3645;
(use of index so all tables are not called ?)
I'm currently assessing the design/performance of a Distributed System in which hundreds of Field reps have local Oracle DBs (10.2.0.4) on laptops & have to update a remote database (11.2.0.1) via a PUBLIC database link. Field data (millions of records) collected daily is synched from the local to the remote DB & vise versa through this database link. I have 2 concerns here:
1. Is the database link the best option for such a configuration? (recently field reps have been complaining about the slowness in synchronizing data between local & remote DBs). If not, what other options are available for such processing?
2. I've read a lot about security concerns with using PUBLIC database links, but haven't seen any documents to proof they're a majority security issue. why PUBLIC database links are considered not to be very secure?
I am using SQL Developer.I am self-teaching myself PL/SQL. What I am trying accomplish is to run a select query across many database links at runtime and to insert that query onto a local table. So far, I have only gotten as far as querying the database link names. I am stuck at where my variable calls the database link name. It does not recognize the database link name, and I can't quite grasp the reason why. Below is the first part of my script which does retrieves the column values no problem:
001 SET SERVEROUTPUT ON
002 DECLARE
003 db_link_varVARCHAR2(30);
004 source_cursorINTEGER;
005 destination_cursorINTEGER;
006 src_csrINTEGER;
007 dst_csrINTEGER;
008 rundate_varDATE;
009 instance_name_var VARCHAR2(30);
[code]....
If I break the script down to the bare select query, it will query absolutely fine.If I run the script in its entirety, it will not pick up the variable dbl as a dynamic database link. 02019. 00000 - "connection description for remote database not found"
If I comment out line 031 and prevent the looping of querying of database links (which will only fetch the first value of db_link from dba_db_links), the script will complete and I will have a row inserted into my local table.
I am suspecting it's the looping that is incorrect but I understand it is not going to do anything beyond line 059.
how to find out what are all the objects referring to particular database links in database?
View 6 Replies View RelatedThere is a user account called 'BALA' in my database.I want to find out the database links that uses this 'BALA' account.
View 2 Replies View RelatedIs it possible to use the Oracle HAIP feature to bond multiple network links between Active and Standby database ?
Does this require a seperate license ?
Basically, I was looking for a solution for bonding the muliple WAN links that we have between the active and Standby database.
is there any way to refer a table which is in different schema other than using DB links.
View 5 Replies View RelatedA website requires to display consolidated data from databases located in different geographical regions (India, London and New York). The application server for the website is hosted only in one location India. What are the techniques that can be used for faster retrieval of data from all 3 databases?
Note: There is no need of real time data retrieval from different regions; however the user should able to view the updated data at predefined intervals.
I know how to use database links in various forms, but I've been trying to think through how the authentication works for a connected user link in 11g. If I create the link like this,
create public database link using 'orcl';
then any user can use the link, provided they have an identical username/password in the two databases. With pre-11g passwords, it was understandable: the password was salted with the username, so the hash of the password would be the same in both databases, and I assumed that the logon through the link used some sort of IDENTIFIED BY VALUES mechanism. But in 11g, the salt will different in the two databases. So the hash will be different. And of course Oracle never stores the actual password. So I don't see how the authentication works.
I would like to know if we can insert 300 million records into an oracle table using a database link. The target table is inproduction and the source table is in development on different servers.The target table will be empty and have its indexes disabled before the insert. if this can be accomplished in less than 1 hour.
View 26 Replies View RelatedI know how to use database links in various forms, but I've been trying to think through how the authentication works for a connected user link in 11g. If I create the link like this,create public database link using 'orcl';then any user can use the link, provided they have an identical username/password in the two databases. With pre-11g passwords, it was understandable: the password was salted with the username, so the hash of the password would be the same in both databases, and I assumed that the logon through the link used some sort of IDENTIFIED BY VALUES mechanism. But in 11g, the salt will different in the two databases. So the hash will be different. And of course Oracle never stores the actual password. So I don't see how the authentication works.
View 4 Replies View RelatedApplication which I`m creating would work only inside domain. In the report I would like to have a link to files that stored outside from oracle server ( so apex cannot see the file but knows the absolute path to the file ).
And when I click in the report on the link to the file I would like to have this file opened in the application controlled from my OS ( naturally if I have rights to the path specified given from domain level).
I have been trying with column link ( a href, file:// ) and none of them works. I want to avoid APEX from copying files to local path or opening using java or creating directory.
I am trying to retrieve info from multiple DBs and insert into a central DB via DB LINKS.The links are retrieved via a cursor.
However I keep coming up against 'PL/SQL: ORA-00942: table or view does not exist'..how to handle db_links using a cursor in a pl/sql block? The code is as follows:
DECLARE
db_link_rec VARCHAR2(30);
CURSOR db_link_cur IS
SELECT DB_LINK
from MESSAGING_PROD_LIST;
BEGIN
OPEN db_link_cur;
LOOP
FETCH db_link_cur INTO db_link_rec;
EXIT when db_link_cur%NOTFOUND;
[code]....
In the login page, I want to add a text "Register" that when clicked will send the user to another page to register.
With a button, its simple because its inbuilt there,but I do not want a button,just this: Register
I want also to have the text in color not black.
how to insert the data in multiple bases( Same table structure in different bases) using the multiple database links?
View 4 Replies View Related1. How can we find out what all are the SQL Queries/Procedures/Functions/<Oracle DB Objects> are running long time and affecting the Performance in each schema. If they affecting how to resolve it?
Here Need to Display the Queries and the method to increase the performance of the query.
2. How can we find out what all are the DB links are Out Facing and In facing? ( In Each Schema)
how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>.
I have created one procedure based on one table item master which has a field called item stock or non stock based on this i will fetch data from one of two tables .If its a stock item data will be retrieved from wip_main_acnt table and if its non stock it will pick from ns_main_acnt.my procedure is working fine but all i need is i just want to put an exception that if data is not found in one of the table based on the item selected.I am confused which one to be used whether no_data_found or notfound%.
CREATE OR REPLACE PROCEDURE dflt_pr_acnt (
l_item_code IN VARCHAR2,
l_main_acnt_code OUT VARCHAR2
)
[code]....
I have the following requirement.Say I have the following procedure created.create or replace procedure myproc (p1 varchar2, p2 varchar2) is begin
find_the_proc_name();
end;
In the above myproc, using find_the_proc_name() i should print the parent procedure name (or function) calling along with the parameters passed.
DB version:11g
can we create a procedure inside a procedure...if not is there any alternative??
in db2 it is allowed so do oracle support this????
ORA-06502...I have database on oracle 9i on Solaris 9. I create a generate procedure that create dynamic procedure through DBMS_SQL. On this database I got the ORA-06502 error. When I tried to run the same procedure on the same database on oracle 8i on NT this work fine.
View 3 Replies View RelatedI wanted to Compile a Procedure within another procedure.
Step 1:
CREATE OR replace PROCEDURE Compile_test
IS
var1 NUMBER(20);
BEGIN
SELECT user_id
INTO var1
FROM dummy;
dbms_output.Put_line('the output is '
||var1);
END;
Step 2:
CREATE OR replace PROCEDURE Compile_test_in (proc_name VARCHAR2)
IS
var2 VARCHAR2(20);
BEGIN
var2 := 'proc_name';
EXECUTE IMMEDIATE ('alter procedure ||var2|| compile');
END;
Step 3:
exec compile_test_in ('compile_test')
When trying the step 3, i am getting the below error message.
Error at line 1
ORA-04050: invalid or missing procedure, function, or package name
ORA-06512: at "MUTHU.COMPILE_TEST_IN", line 6
ORA-06512: at line 1
can we call a procedure within a procedure in a package or does it have to be declared before it can be called in the body,where can i find an example
View 9 Replies View Related