I am using apex 4.0.2.00.09 and when I Tried to import jrxml2pdf-1.2.0.2.releas from the application it gave me 1 error has occurredNOT COMPATIBLE (Your export may contain calls not supported by your application version.)
which jrxml2pdf version I should use?
We had a query whether, oracle apex 4.0 and above is IPv6 compatible or compliant ? We use Oracle apache HTTP Server as the application server and oracle 11G database.
View 3 Replies View RelatedActually I have installed win95 compatible version of forms 6i on XP. It was successfully installed on XP
But when I am trying to connect database it throwing error ORA-12203:Unable to connect destination.
was this is issue because of the compatible installation?
I'd like to know if Oracle 10.1.0.2.0 is compatible with Windows 2008 R2 x64. Is there any patch to download from the Metalink of Oracle?
View 8 Replies View RelatedI am trying to have an encryption logic written in Pl/SQL that could decrypt the value which is encrypted in Dot Net, using AES128 algorithm. Everytime when i try to have the decryption done, i lands up in one or the other error message. Below is the code snippet which i use. create or replace
FUNCTION decryptAES (EncryptedText IN VARCHAR2,EncKey IN VARCHAR2) RETURN VARCHAR2 DETERMINISTIC IS key_bytes_raw RAW (2048); l_ decrypted_raw RAW (2048); encryption_type PLS_INTEGER := DBMS_CRYPTO.ENCRYPT_AES128; BEGIN key_bytes_ raw:= UTL_RAW. CAST_TO_ RAW (EncKey); l_decrypted_raw := dbms_crypto.decrypt (src =>utl_raw.cast_to_raw(EncryptedText), typ => encryption_type, key => key_bytes_raw ); RETURN (UTL_RAW.CAST_TO_VARCHAR2 (l_decrypted_raw)); END decryptAES.
I want to upgrade our database version (9.2.0.7) to 10g (10.2.0.2)
I know if I set COMPATIBLE parameter to 10.2.0.2 at first then I can't downgrade to 9.2.0.7 if any problem occurs I am not sure that our application can deal with 10g or not so I think it's better to leave the COMPATIBLE parameter to 9.2.0 several days for sure and if all things go well then change COMPATIBLE to 10.2.0.2 (I need to say that I can’t test our application in a test environment )
Now do you think leaving COMPATIBLE to 9.2.0 (after upgrade) for many days can cause any problem to Database ?
did oracle 11g is compatible for windows 8. did oracle release any certification for that.
View 5 Replies View RelatedI have Windows 7 (System Type - 64-bit OPerating System & ACPI X64 PC Type) and want to install Oracle Database.
The compatible version with the above operating system and send me the direct link for downloading.
Actually i am migrating forms from 6i to 10g Here i need to set the window which should be fit in the browser(internet explorer) resolution and it should be compatible for any resolution?
i have tried by changing width and height in formsweb.cfg file but it is not compatible for different resolutions...
I am trying to use oracle wallet with the new odp.net managed driver, but I am getting
"invalid username/password".
As the wallet itself is ok (it works with the unmanaged client), seems to me that this new provider is not fully compatible with Oracle Wallet. Is this true? I am trying this:
<oracle.manageddataaccess.client> <version number="*"> <settings> <setting name="tns_admin" value="D:oracleproduct11.2.0client_1
etworkadmin" /> <setting name="WALLET_LOCATION" value="D:oraclewallets" /> </settings> </version> </oracle.manageddataaccess.client>
Following is the scenario:
1. Oracle DB Binaries: 11.2.0.2.2
2. Using dbca to create General Purpose Database and then modify initialization parameter "COMPATIBLE from 11.2.0.0.0 to 10.2.0.3.0" in the "All Initialization Parameters" window.
So, when I finally start installing database, I get following error during the install:
ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version 10.2.0.3.0
ORA-00202: control file: '/u01/app/oracle/cfgtoollogs/dbca/infpp1/tempControl.clt'
IGNORE OR ABORT...
Now you might ask why i am doing this. Actually I want to install fresh 11grel2. database with lower compatible parameter. IMPORT DP custom schemas into this database making sure compatible is set to 10.2.0.3.0. Then run database with such settings for a week and finally change compatible parameter to 11.2.0.0.0
Any thoughts where i am going wrong? as the default template seems not accepting what i am interested to do.
How oracle deals with the setting of init.ora parameter compatible.
e.g. we have
DB Version=10.2.0.4
compatible=10.2.0
what is the possible leak for us ? Is there any description about the features changed in 10.2 up to 10.2.0.4 in all steps - so that we can check out which functions we do not have.
I have been asked to look at making an existing Oracle server resilant. The technology I need to use are:
- Windows 2008 R2 Enterprise SP2
- Microsoft Cluster Services
- Oracle Enterprise 11g release 2
- Oracle Fail-Safe (latest version available)
Unfortunately ApEX 4.1 and Mod_plsql are install on the existing stand-alone server. I'm afraid i know very little about Oracle and ApEX but i need to make a design decision and check fiesablilty.
I believe the HTTP service and Mod_plsql can be moved to a independant server which should work but ApEX itself must remian on the database server (i'm told).Will ApEX work in a MSCS setup? I can only find references to RAC support, RAC is out of scope.
I have four Oracle 8i databases that can not be removed because of client requirements. These 8i databases have there own RMAN catalog which is 10G (Originally there were Oracle 8i, 9i and 10g databases using it but are now moved to 11g catalog). Databases are backing up fine. However, all the other databases are using the RMAN 11g Catalog. I want to point the Oracle 8i databases to point to the RMAN 11g recovery catalog. I created an 8i schema, however, i'm getting the following error message: RMAN-06429: RCVCAT database is not compatible with this version of RMAN. however, I wanted to put the question out there to see if there are any work arounds.
View 3 Replies View RelatedWe have integrated Oracle Access Manager 11gR1 with Oracle Apex 4.1. The OAM-Apex integration is working fine. Now we want an additional header variable to be passed from OAM to the Apex application. This new header variable will be user's sAMAccountName in Active Directory. OAM is integrated with AD and the AD users are successfully able to access the Apex applications.
The three header variables which are configure in OAM right now are:
Header variable name Value
1. OAM_REMOTE_USER $user.userid
2. OAM_REMOTE_USER_EMAIL $user.attr.mail
3. OAM_REMOTE_USER_GROUPS $user.groups
We need an additional header variable as mentioned below:
Header variable name: OAM_SAMACCOUNTNAME
Value: $user.attr.samaccountname
The new header variable was added in the OHS server's dads.conf file like shown below:
=========== dads.conf =============
...
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_GROUPS
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_EMAIL
PlsqlCGIEnvironmentList HTTP_OAM_SAMACCOUNTNAME
But we are not able to read the value of this attribute in the Apex application.On the Apex application, we have a text box which shows the value of this header variable. This textbox is attached with the following stored procedure call to fetch the header variable:
===================
begin
:P1_HEADER_VALUE := owa_util.get_cgi_env( 'HTTP_OAM_SAMACCOUNTNAME' );
end;
The textbox shows the correct value if HTTP_OAM_REMOTE_USER is passed to the get_cgi_env method but does not shows anything when HTTP_OAM_SAMACCOUNTNAME is passed to the same method. if I am missing some configuration to pass the HTTP_OAM_SAMACCOUNTNAME haeder variable from OAM to Apex.
I have multiple application set-up using session sharing within the workspace.Technically all works fine, however it does not play nice with user behaviour.
Example:
Users logs into APP_ID:100. Since he isn't authenticated yet, he provides user/pass and the APP_SESSION is authenticated.
Now if the user switches using to another application (using a link provided in application 100) he gets redirect to APP_ID:101:APP_SESSION all is fine.
The session is already authenticated, the application shares the session and the user gains access to app 101 without having to authenticate again. All's fine!
However users don't behave they way. Instead of using an easy link in the application. They will use their own bookmark or type in the url for app 101 manually. That way the next application is either called with f?p=101:1:[SOME OLD SESSIONID FROM BOOMARK] or f?p=101 (with no further page or session info) In both cases instead of using the already authenticated session apex spawns a new session, which of course isn't authenticated yet thus forcing the user to authenticate and come complaining they have to login again.
Similar behaviour problems exists when the user opens a browser and tries to open both applications in each in a tab next to each other.Both tabs fetch there own initial session id and start writing it to the same cookie each in turn invalidating the other tab's session.These can lead to some fanatic ping pong actions. Thus it's impossible to open 2 applications sharing session in the same browser.
Is there any remedy for these situations?Can apex be as smart as for instance first trying to resume the session stored in the cookie and only if that session is invalid, start a new session?
how to use checkbox item, and trying to get checked options values via application global arrays. So, this may be quite simple question, but I'm completely stuck here...
When I was looking through various threads and guides, I've encountered checkbox corresponding array names like "g_f01" - "g_f50". And so far i saw that these names are derived from item name in generated HTML code, for example:
<input type="checkbox" name="*f10*" value="3" />
And this one stands for array name "g_*f10*".However, when I tried to do the same thing - i receive item name which looks like "*p_v04*", and therefore, I can't figure out, which array name should I choose to adress it properly.
My generated HTML snippet:
<input type="checkbox" id="P6_ANSWER_0" name="*p_v04*" value="3"/>
i want to display a list of all users on a page those currently accessing or using the application. How do i accomplish this requirement?
View 1 Replies View RelatedAPEX 4.0 Sometimes, I am getting the below error when I tried to logging into APEX workspace (after giving workspace name, User name and password), Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
ErrorERR-7621 Could not determine workspace for application (:) on application accept. I found some threads related to this but in different way not exactly when I am getting this error.
After 2 or 3 times, this error will not come and I can able to logging into workspace What is the cause for this issue??
Each time when I import an application into my workspace in local 10g XE using the APEX 4.2 Application Builder, I get the "ORA-02291, constraint wwv_flows_fk violated..". The application I whant to import was originally exported from [URL]. I found out, that it has to to with wwv_flow_application_install.get_workspace_id in the installation script, which obviously returns NULL and not my current workspace id as I suppose it should. I replaced wwv_flow_application_install.get_workspace_id by '<my worskspace id>' and then the import does work.
View 0 Replies View RelatedI have an application that I'd like to prevent activity in after a certain time of day, say 3pm. Is there any way I can force logout of all current users and then prevent re-login until 9am the next day (short of deleting all of their login credentials and then recreating them the next morning)?
View 7 Replies View RelatedWe have developed an application for our clients,planning to deploy it in client server soon. we have plans to support the application in future,so we want to restrict the clients from any modifications. By Doubt is, 'build_status=Run only' alone,cannot protect our application from client developers to edit our application,
Because though we install our application as 'Run Only' at the time of installation in client instance,we can still import the original application and change the type to 'Build and Run Application',and run the new application as 'Build and Run'.(which is not supposed to) we want to make sure,if there is any way we can protect our application from modifications after client side installation.
I'm trying to connect a javascript UI control within my page to an APEX Application Process. The control calls the application process via AJAX and appends a variable number of GET / POST parameters to its URL.What is the best way to obtain these parameters from within the PLSQL procedure of the process? Or is there a better way to connect my javascript AJAX control to the Database behind my APEX app?
View 4 Replies View RelatedI have some applications on Apex public workspace (apex.oracle.com), and suddenly the Tree View, on Application Builder stopped showing any content. If I select "Component View", I see the page components, but if I switch to tree view, it shows me only some empty frames.
View 2 Replies View RelatedI'm trying to set up a PL/SQL dynamic action that is triggered by clicking on a button. The dynamic action sets two values in a table and then I would like to redirect to another page. Setting the values works fine. The code is below:
declarel_information varchar2(255) := :P94_FILENAME;BEGINcommit;UPDATE VDI_METADATASET CREATEUSERLISTNAME = l_information, CREATEUSERLISTON = sysdate();commit;htp.init;owa_util.redirect_url('f?p=&APP_ID.:81:&APP_SESSION.::NO:::');END; The redirect fails with the following eror: "Error: parseerror: JSON.parse: unexpected non-whitespace character after JSON data"
how to redirect to a page from within PL/SQL . None of them result in success.
I'm doing a small application in Apex 4.2.0.00.27 mobile themes.
Application is used to search for books.Will work on a PC Windows with touchscreen.
How do I add a virtual keyboard to my application?
version 4.0.2.00.07
I had an error importing an application into Production that was exported from Development. The application exists and I was trying to replace it.
The error I received was:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.
ORA-20001: Error creating dynamic action sub-action name="NATIVE_JAVASCRIPT_CODE" id="9503820976918886"
ORA-02291: integrity constraint (APEX_040000.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found<pre>
begin wwv_flow_api.create_page_da_event ( p_id => 9504132415918888 + wwv_flow_api.g_id_offset ,p_flow_id => wwv_flow.g_flow_id ,p_page_id =>I
opened the SQL that was created from the export utility and this is where it errored:
begin
wwv_flow_api.create_page_da_event (
p_id => 9503820976918886 + wwv_flow_api.g_id_offset
,p_flow_id => wwv_flow.g_flow_id
,p_page_id => 6
,p_name => 'Add tooltip to Numeric filter operators'
,p_event_sequence => 40
[code]....
Unless I'm not understanding this error it means that it can find the ACTION part that is attached to the WHAT part of this Dynamic Action? The Dynamic Action does work when the application is run (in Development)also, there are 3 others that are similar to this one. The export was created by the export utility in the Application Builder.
If I export only the page and import that into Production the import is successful and the page runs correctly. This is error is happening only when I try to import the entire Application.There are many other changes made which is why I was trying to do an Application export/import instead of individual pages.
I have to modify the Form layout of an existing application (Application Express 4.0.2.) where the data for each field is retrieved using SQL statements
Presently the form looks something like this and the Data for each field is rendered properly in this layout:
UNIT # : 123456
ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE:
FIRST NAME: JON LAST NAME: DOEFIRST NAME, LAST NAME and UNIT # are all "Display Only" item type.
What I'm trying to do is to move "FIRST NAME" underneath "LAST NAME" and "UNIT #" next to "LAST NAME" This part is very simple. However, the issue I'm having is as soon as the "UNIT #" is moved next to "FIRST NAME", the data for "FIRST NAME" and "LAST NAME" simply disappear
This is how it looks
ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE:
FIRST NAME: UNIT #: 123456
LAST NAME:
I have played around for hours and even created from scratch a new page with a new form using SQL statements to pull the data for each field, only to get the same result.
I have an application item that receives a web service result. This result is like 'MARIA','JOSE','JESUS'. I'm using this string into the parameters of the interactive report, but this is not recognized. I'm showing the content of the application item into a pl sql region and the content is 'MARIA','JOSE','JESUS', when I include this application item into the query, the IR shows me 'MARIA','JOSE','JESUS'
View 1 Replies View RelatedHow do I center a button within a region? I tried 'align="center"' but this seemed to be ignored. The button is at the left of the screen. Also, what are the 'display points' (Page Template Region Position 1-8) used for, and why is there a specification for column position of 1-9? Could these be attributes that will allow my button to be centered on the window instead of on the left?
View 3 Replies View Related