i read some articals of how to trace oracle sessions and i have some question
i use database 10g
trace vs event ??? different between them ????
how to trace individual statement i hope to give me this point in ex: due to i can't get the sql_id ,how to know the sql_is of specify statement??
Customer is running a Job from a Schema which is generating multiple sessions . I want the all the sessions to be traced from that particular Schema .
View 4 Replies View RelatedI've been searching the web for examples of how to run a trace.It's needed for a session different then current in trace LEVEL 4 (I need the bind variables values in the trace).
Unfortunately, I couldn't trace with DBMS_SUPPORT.START_TRACE_IN_SESSION, I understand that this is because it was only introduced in Oracle 11g.
how can i trace a session in level 4 on Oracle 10g for another session?
I have an urgent requirement to kill an existing session if a new session starts for the same user. I have been reading lot of blogs and posts on the above topic, but could clearly tell me how to do it.
I thought of putting a process in 101 page when login button is pressed to catch this and kill the old session.
We are using Apex 4.0/Oracle 10gR2/ Hp-Ux, We noticed that there is a process Running in Two Sessions that seems running since 3 Hours using 60% CPU,** 30% given below sql it executes in two Sessions!
declare function x return boolean is begin -- if instr(upper(:F4000_P4651_PLUG_SOURCE),'ORDER BY')>0 then
declare
l_position number := 0;
begin
loop
l_position := instr(upper(:F4000_P4651_PLUG_SOURCE),'ORDER BY ',l_position + 1) ;
exit when instr(upper(:F4000_P4651_PLUG_SOURCE),'ORDER BY ',l_position + 1) = 0 ;
[code]....
Instead of giving permission directly to v$session and gv$session to a developer, Is there any other way to do the same?
View 3 Replies View Relatedi have 3 tables
T1
node_id
T2
node_id, object_type
T3
node_id, object_type
my requirement is T1 node_id exists in which table(T2 or T3). If T1 node_id exists in T2 then return T2 object_type else return T3 object_type
sample data
==========
create table T1
(
node_id number(4)
);
create table T2
(
node_id number(4),
object_type varchar2(15)
);
create table T3
(
node_id number(4),
object_type varchar2(15)
);
begin
insert into T1 values(10);
insert into T1 values(20);
insert into T1 values(30);
insert into T1 values(40);
insert into T1 values(50);
insert into T1 values(60);
insert into T1 values(70);
insert into T1 values(80);
insert into T2 values(10, 'Concept');
insert into T2 values(20, 'Concept');
insert into T2 values(110, 'Concept');
insert into T2 values(118, 'Concept');
insert into T2 values(136, 'Concept');
insert into T2 values(128, 'Concept');
insert into T2 values(80, 'Concept');
insert into T3 values(10, 'Grouping');
insert into T3 values(120,'Grouping');
insert into T3 values(130,'Grouping');
insert into T3 values(140,'Grouping');
insert into T3 values(150,'Grouping');
insert into T3 values(160,'Grouping');
insert into T3 values(70,'Grouping');
insert into T3 values(180,'Grouping');
insert into T3 values(260,'Grouping');
insert into T3 values(270,'Grouping');
insert into T3 values(280,'Grouping');
end;
/
I am getting below mentioned error in alertlog file very frequently.
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 747
ORA-06512: at "BEE_CODE_05252013.SS_INDEX_JOB_PKG", line 496
Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc:
Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc:
Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc:
Tue Jul 02 15:31:15 2013
[code]....
i am using 10.2.0.4.0 version of oracle.I am having trace file info as below, for one of the query. So how should i interpret the trace file? What is the issue in the query, and the scope of improvement in the query? I have removed the query and its plans from the trace file, i have only posted the wait sections.
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.14 0.13 0 0 1 0
Execute 1 6.63 162.12 33540 72921 383 0
Fetch 17272 178.89 1933.95 274835 3147603 20 259063
------- ------ -------- ---------- ---------- ---------- ---------- ----------
total 17274 185.66 2096.21 308375 3220524 404 259063
[code]....
I have a procedure in the live environment , which operate in 2 mode.
1 regular load at 10 min
2 nightly
The code is same except they set the last loaded time for both in 2 dfferent rows, so that next time run will get incremental data.
I can trace this procedure on mode 1 that is is scheduled but unable to find how the 2nd one is getting trigger every night. there is no jobs corresponding to that. Is there any way i can find which method is trigger the procedure during night.
un-documented parameter _trace_files_public / I want to set this to true so my app team can review trace files. better way to proceed to open read permissions for non oracle users.
View 2 Replies View RelatedI wanted to trace DDLs that comes from application and did this .
EXECUTE DBMS_MONITOR.SESSION_TRACE_ENABLE(session_id => 1727, serial_num => 14319,waits => FALSE);
<waited till session completed all operation(ie,drop indexes)>
EXECUTE DBMS_MONITOR.SESSION_TRACE_DISABLE(session_id => 1727, serial_num => 14319);
Now i looked at tkprof output, I dont see any single DDL . Is this not the way to trace DDLs.
I need to take the database trace of each page of my web application. I am giving the following commands.
BEGIN
dbms_monitor.session_trace_enable(session_id=>122, serial_num=>NULL, waits=>true, binds=>true);
END;
Accessing the web application. Once it renders completely, I am executing the following command.
BEGIN
dbms_monitor.session_trace_disable(session_id=>122);
END;
In the user_dump_dest folder, I am expecting to see a new trace whenever I execute these commands. But the same trace file is getting updated. How do I make oracle to create a new trace for each iteration. I am using Oracle 11g Release on CentOS 5.x
We are running Oracle 11.2.0.3 on a Windows 2008 R2 Server with an app server on the same. Our app has a search function that has recently started timing out on us. Sometimes intermittently but often now. I've ran a trace in our dev environment, below code, in an attempt to track down the issue but I'm finding very little useful information in relation to the errors I see in the trace file below. My experience in deciphering trace code is nill so how to interpret these errors.
*** 2013-04-18 14:27:23.353
*** SESSION ID:(3093.63097) 2013-04-18 14:27:23.353
*** CLIENT ID:() 2013-04-18 14:27:23.353
*** SERVICE NAME:(SYS$USERS) 2013-04-18 14:27:23.353
*** MODULE NAME:(w3pw.exe) 2013-04-18 14:27:23.353
*** ACTION NAME:() 2013-04-18 14:27:23.353
[code]....
As a sys user i want to trace a user session. so i am using
SQL> EXEC DBMS_SYSTEM.set_sql_trace_in_session(sid=>123, serial#=>1234, sql_trace=>TRUE);SQL> EXEC DBMS_SYSTEM.set_sql_trace_in_session(sid=>123, serial#=>1234, sql_trace=>FALSE);
to trace. but this trace file is mixing with another trace files in udump. did some Google and found that we can use
ALTER SESSION SET TRACEFILE_IDENTIFIER = "MY_TEST_SESSION".
but this will generate trace file for sys user account not for the desired user session. how we can define trace file name for desired user session trace.
after apply patch 10.2.0.4 for 2 10gr2 node i tried to start asm on 2 node but i found that the 1st node (master node)
can not started but the second node is ok and this error found in trace file for lmon.trc
kjxgmpoll: terminate the CGS reconfig.
Error: KGXGN polling error (15)
error 29702 detected in background process
ORA-29702: error occurred in Cluster Group Service operation
ksuitm: waiting up to [5] seconds before killing DIAG
I want to trace the time it takes to refresh the MV for the last few runs. How can i find that? The MV runs every 7 hours..for the last few times it runs, I would like to trace the time it took to complete.
View 1 Replies View RelatedOracle version: 11.2.0.3.0 Enterprise Edition
OS - IBM/AIX RISC System/6000
I am trying to generate a trace file from a piece of code executed by java server. What I asked the java developer to do is to place this block immediately after establishing a connection:
BEGIN
EXECUTE IMMEDIATE 'ALTER SESSION SET TRACEFILE_IDENTIFIER = ''M1''';
dbms_monitor.session_trace_enable(waits => FALSE, binds => TRUE);
END;And at the end of the logical java block of code:
BEGIN
dbms_monitor.session_trace_disable;
END;
What I want to know is how many rows the java server fetches after executing one particular select statement, because they complain about receiving less in count rows from the select statement than expecting. For example, if I execute the same sql query in sqlplus session, then I fetch let's say 1000 rows. When the same query is executed from java side, the fetched rows are less in count, let's say 500.And because I doubt it, I wanted to trace to see what actually is executed and how.the excerpt of the trace file I see exactly the same query which I execute myself in a sqplus session.is no fine-grained control on the udnerlying tables in the query.
And my question is, how to interpret the FETCH phase of the cursor (for the select statement)?example, if I see one FETCH for this cursor, does this mean that the java server has fetched only one row?If I see 100 FETCHes, does this mean they fetched 100 rows from the cursor?
Here is a short excerpt from the trace file (don't crucify me for the query and the obvious denormalized design of the tables, this is not invented by me):
PARSING IN CURSOR #4573587152 len=667 dep=0 uid=737 oct=3 lid=737 tim=17685516462413 hv=954980718 ad='70000006d3e4940' sqlid='69pm96nwfrqbf'
select /* ordered */ o.id, nvl(o.par_id, -1) as par_id, o.NAME_GER, o.NAME_ENG, o.NAME_ESP, o.NAME_ITL,o.NAME_FRA, decode(lo.lflag, 'Y', 'L', 'N') as leaf_or_node, lo.distance + 1 as "LEVEL", to_char(o.beg_date,
[code]...
I got the below message in trace file. What does the line "swap info: free = 0.00M alloc = 0.00M total = 0.00M" trying to say?
I have
RAM=1.5G
Swap=3.5G
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options ORACLE_HOME = /home/oracle
System name:Linux
Node name:linuxdev
Release:2.6.5-7.97-default
Version:#1 Fri Jul 2 14:21:59 UTC 2004
[Code]....
I have created a fast refresh materialized view.now i wanted to know my materialized view how long processing for refresh.which table stores this information with syntax.
View 2 Replies View RelatedI am working on tuning the performance of one of the concurrent request in our 11i ERP System having database 11.1.0.7
I had enabled oradebug trace for the request and generated tkprof out of it. For below query which is taking time , I found that , in the trace generated , wait event is "db file sequential read" on an PO_LINES_N10 index but in the generated tkprof , for the same below query , the full table scan for PO_LINES_ALL is happening , as that table is 600 MB in size.
Below is the query ,
===============
UPDATE PO_LINES_ALL A
SET A.VENDOR_PRODUCT_NUM = (SELECT SUPPLIER_ITEM FROM APPS.IRPO_IN_BPAUPDATE_TMP C WHERE BATCH_ID = :B1 AND PROCESSED_FLAG = 'P' AND ACTION = 'UPDATE' AND C.LINE_ID =A.PO_LINE_ID AND ROWNUM = 1 AND SUPPLIER_ITEM IS NOT NULL),
LAST_UPDATE_DATE = SYSDATE
===============
Index PO_LINES_N10 is on the column LAST_UPDATE_DATE , logically for such query , index should not have got used as that indexed column is not in select / where clause.
Also, why there is discrepancy between tkprof and trace generated for the same query .
So , I decided to INVISIBLE the index PO_LINES_N10 but still that index is getting accessed in the trace file .
I have also checked the below parameter , which is false so optimizer should not make use of invisible indexes during query execution.
SQL> show parameter invisible
NAME TYPE VALUE
----------- optimizer_use_invisible_indexes boolean FALSE
I have written a windows service which grants and revokes based on request. How to trace in oracle data dictionary if those privilages were granted and at what time to whom and by whom. I mean is there any table which can be queried for past privilages granted to users.
View 2 Replies View Relatedi want to know about trace file and TKPROF. any example.
View 1 Replies View RelatedI know that this query had been executed again the db, but the person is no longer here. Last run was about 3~4 months ago.
SELECT Subject_ID,
TO_CHAR (completed_date, 'mm/dd/yyyy'), status
FROM ADMINDBG_USER.adbt_master
...
[ADMINDBG_USER.adbt_master] is not a part of [dba_tables]. [ADMINDBG_USER.adbt_master] must be a view/procedure/a sort.
I have no luck to find what view/procedure/syntax is populating the data onto [ADMINDBG_USER.adbt_master].
I need to trace all sessions created from specific user and specific machine . Got some code from internet and customised .
CREATE OR REPLACE TRIGGER SYS.enable_trace_trigger
AFTER LOGON ON DATABASE
DECLARE
[Code]....
I have yet not created it on db .
I am having 11.2.0.1.0 database with windows2k3 OS. For ORA-609 error i have started server side tracing by adding TRACE_LEVEL_SERVER=16,TRACE_LEVEL_DIRECOTRY=D:TRACE,and DIAG_ADR_ENABLED=off in sqlnet.ora file and i reload the listener.
Now i want to stop tracing so i have tried TRACE_LEVEL_SERVER=off but it wouldnot work. After that i remove TRACE_LEVEL_SERVER=16,TRACE_LEVEL_DIRECOTRY=D:TRACE from sqlnet.ora file and reload the listener but trace file generation is going on D:TRACE. stop server side tracing.
i want to trace user activities, I want to generate the file with SQL statement generated by particular user. I tried to look in to sys.AUD$ but all i get is logging logout and locations but no SQL Text.
View 7 Replies View RelatedHow do I trace an particular object (procedure/package) on the database. my database version is Oracle 11g(11.2.0.2)
View 2 Replies View RelatedI want to trace particular one user SQL activity in Oracle 10G database.
Note - Not only one session / Not for all Database activity
Can I disable tracing just on deadlocks events on 11gR2?One of our applications provoke several deadlocks. I've warned the developers team several times, but it's taking time to solve it. However, these deadlocks generate trace files of several sizes (from 300M to 3G ..)The Deadlock Graph on them are very useful but the PROCESS STATE section are too long, and until the developers team fix the problem they are just filling up my user dump dest. Can I disable them or disable the PROCESS STATE section from them?
View 2 Replies View Related