Getting Error In Trace File
Jul 2, 2013
I am getting below mentioned error in alertlog file very frequently.
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 747
ORA-06512: at "BEE_CODE_05252013.SS_INDEX_JOB_PKG", line 496
Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc:
Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc:
Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc:
Tue Jul 02 15:31:15 2013
[code]....
View 1 Replies
ADVERTISEMENT
Nov 19, 2011
after apply patch 10.2.0.4 for 2 10gr2 node i tried to start asm on 2 node but i found that the 1st node (master node)
can not started but the second node is ok and this error found in trace file for lmon.trc
kjxgmpoll: terminate the CGS reconfig.
Error: KGXGN polling error (15)
error 29702 detected in background process
ORA-29702: error occurred in Cluster Group Service operation
ksuitm: waiting up to [5] seconds before killing DIAG
View 3 Replies
View Related
Oct 19, 2010
In Trace file I am always geeting one error "Error encountered: ORA-10980" due to which MVs fails . how to overcome from this error?
View 2 Replies
View Related
Apr 8, 2013
I am trying to install Oracle 11g R2(64bit) on Windows 7 64 bit OS. While Creating Database using DBCA. I am getting error. Below is the screenshot.
Below is the error in the Trace file...
oracle.sysman.assistants.util.step.StepExecutionException:
Error in Process: C:Oracleapporacleproduct11.2.0serverinorapwd.exe
Unable to find error file %ORACLE_HOME%RDBMSopw<lang>.msb
View 3 Replies
View Related
Jul 24, 2012
i am using 10.2.0.4.0 version of oracle.I am having trace file info as below, for one of the query. So how should i interpret the trace file? What is the issue in the query, and the scope of improvement in the query? I have removed the query and its plans from the trace file, i have only posted the wait sections.
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.14 0.13 0 0 1 0
Execute 1 6.63 162.12 33540 72921 383 0
Fetch 17272 178.89 1933.95 274835 3147603 20 259063
------- ------ -------- ---------- ---------- ---------- ---------- ----------
total 17274 185.66 2096.21 308375 3220524 404 259063
[code]....
View 18 Replies
View Related
Aug 11, 2011
I need to take the database trace of each page of my web application. I am giving the following commands.
BEGIN
dbms_monitor.session_trace_enable(session_id=>122, serial_num=>NULL, waits=>true, binds=>true);
END;
Accessing the web application. Once it renders completely, I am executing the following command.
BEGIN
dbms_monitor.session_trace_disable(session_id=>122);
END;
In the user_dump_dest folder, I am expecting to see a new trace whenever I execute these commands. But the same trace file is getting updated. How do I make oracle to create a new trace for each iteration. I am using Oracle 11g Release on CentOS 5.x
View 3 Replies
View Related
Apr 18, 2013
We are running Oracle 11.2.0.3 on a Windows 2008 R2 Server with an app server on the same. Our app has a search function that has recently started timing out on us. Sometimes intermittently but often now. I've ran a trace in our dev environment, below code, in an attempt to track down the issue but I'm finding very little useful information in relation to the errors I see in the trace file below. My experience in deciphering trace code is nill so how to interpret these errors.
*** 2013-04-18 14:27:23.353
*** SESSION ID:(3093.63097) 2013-04-18 14:27:23.353
*** CLIENT ID:() 2013-04-18 14:27:23.353
*** SERVICE NAME:(SYS$USERS) 2013-04-18 14:27:23.353
*** MODULE NAME:(w3pw.exe) 2013-04-18 14:27:23.353
*** ACTION NAME:() 2013-04-18 14:27:23.353
[code]....
View 3 Replies
View Related
Jul 26, 2013
As a sys user i want to trace a user session. so i am using
SQL> EXEC DBMS_SYSTEM.set_sql_trace_in_session(sid=>123, serial#=>1234, sql_trace=>TRUE);SQL> EXEC DBMS_SYSTEM.set_sql_trace_in_session(sid=>123, serial#=>1234, sql_trace=>FALSE);
to trace. but this trace file is mixing with another trace files in udump. did some Google and found that we can use
ALTER SESSION SET TRACEFILE_IDENTIFIER = "MY_TEST_SESSION".
but this will generate trace file for sys user account not for the desired user session. how we can define trace file name for desired user session trace.
View 2 Replies
View Related
Mar 11, 2013
Oracle version: 11.2.0.3.0 Enterprise Edition
OS - IBM/AIX RISC System/6000
I am trying to generate a trace file from a piece of code executed by java server. What I asked the java developer to do is to place this block immediately after establishing a connection:
BEGIN
EXECUTE IMMEDIATE 'ALTER SESSION SET TRACEFILE_IDENTIFIER = ''M1''';
dbms_monitor.session_trace_enable(waits => FALSE, binds => TRUE);
END;And at the end of the logical java block of code:
BEGIN
dbms_monitor.session_trace_disable;
END;
What I want to know is how many rows the java server fetches after executing one particular select statement, because they complain about receiving less in count rows from the select statement than expecting. For example, if I execute the same sql query in sqlplus session, then I fetch let's say 1000 rows. When the same query is executed from java side, the fetched rows are less in count, let's say 500.And because I doubt it, I wanted to trace to see what actually is executed and how.the excerpt of the trace file I see exactly the same query which I execute myself in a sqplus session.is no fine-grained control on the udnerlying tables in the query.
And my question is, how to interpret the FETCH phase of the cursor (for the select statement)?example, if I see one FETCH for this cursor, does this mean that the java server has fetched only one row?If I see 100 FETCHes, does this mean they fetched 100 rows from the cursor?
Here is a short excerpt from the trace file (don't crucify me for the query and the obvious denormalized design of the tables, this is not invented by me):
PARSING IN CURSOR #4573587152 len=667 dep=0 uid=737 oct=3 lid=737 tim=17685516462413 hv=954980718 ad='70000006d3e4940' sqlid='69pm96nwfrqbf'
select /* ordered */ o.id, nvl(o.par_id, -1) as par_id, o.NAME_GER, o.NAME_ENG, o.NAME_ESP, o.NAME_ITL,o.NAME_FRA, decode(lo.lflag, 'Y', 'L', 'N') as leaf_or_node, lo.distance + 1 as "LEVEL", to_char(o.beg_date,
[code]...
View 5 Replies
View Related
Nov 8, 2010
I got the below message in trace file. What does the line "swap info: free = 0.00M alloc = 0.00M total = 0.00M" trying to say?
I have
RAM=1.5G
Swap=3.5G
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options ORACLE_HOME = /home/oracle
System name:Linux
Node name:linuxdev
Release:2.6.5-7.97-default
Version:#1 Fri Jul 2 14:21:59 UTC 2004
[Code]....
View 1 Replies
View Related
Jun 16, 2011
I am working on tuning the performance of one of the concurrent request in our 11i ERP System having database 11.1.0.7
I had enabled oradebug trace for the request and generated tkprof out of it. For below query which is taking time , I found that , in the trace generated , wait event is "db file sequential read" on an PO_LINES_N10 index but in the generated tkprof , for the same below query , the full table scan for PO_LINES_ALL is happening , as that table is 600 MB in size.
Below is the query ,
===============
UPDATE PO_LINES_ALL A
SET A.VENDOR_PRODUCT_NUM = (SELECT SUPPLIER_ITEM FROM APPS.IRPO_IN_BPAUPDATE_TMP C WHERE BATCH_ID = :B1 AND PROCESSED_FLAG = 'P' AND ACTION = 'UPDATE' AND C.LINE_ID =A.PO_LINE_ID AND ROWNUM = 1 AND SUPPLIER_ITEM IS NOT NULL),
LAST_UPDATE_DATE = SYSDATE
===============
Index PO_LINES_N10 is on the column LAST_UPDATE_DATE , logically for such query , index should not have got used as that indexed column is not in select / where clause.
Also, why there is discrepancy between tkprof and trace generated for the same query .
So , I decided to INVISIBLE the index PO_LINES_N10 but still that index is getting accessed in the trace file .
I have also checked the below parameter , which is false so optimizer should not make use of invisible indexes during query execution.
SQL> show parameter invisible
NAME TYPE VALUE
----------- optimizer_use_invisible_indexes boolean FALSE
View 5 Replies
View Related
Apr 10, 2013
i want to know about trace file and TKPROF. any example.
View 1 Replies
View Related
Nov 19, 2012
I am having enq: TX - row lock contention in top wait event. it is occurring between 10pm - 2am.
We are having sqlloader job running every one hour(conventional path). But for the specific period of time i am getting "Global Enqueue Services Deadlock detected". Between 10-5. I analyzed related trace file it is make me little confusion.I found there are four insert query culprit for this locking. out of four sql , tow of them are ran by same SID, other two insert ran by same id. I got confused because how same sid locking them self. trace file below. during this period oracle maintenance window is active.
Trace file:
*** 2012-10-09 03:40:31.135
user session for deadlock lock 0x15365e060
sid: 1104 ser: 22256 audsid: 8797820 user: 49/iurth flags: 0x45
pid: 71 O/S info: user: oracle, term: UNKNOWN, ospid: 8601
image: oracle@sgh0909
client details:
[code]....
View 3 Replies
View Related
Oct 4, 2012
In my database smon tracefile was huge,now we want to delete the same,I also tried with ordebug operation but no use, delete tracfile which Smon generates.
View 5 Replies
View Related
Jan 6, 2011
I am trying to get a readable version of a .trc file generated by Oracle
10.2.0.4.0 with tkprof, but I still have been unable to get this done...and this is what I have already tried:
tkprof /u00/app/oracle/admin/DB/udump/*BITN1234.trc /batch/salidas/student/BITNTRACE.txt
And whether I run this from my PL/SQL process (PRO*C) or from a command line, it returns:
TKPROF: Release 10.2.0.4.0 - Production on Thu Jan 6 11:04:38 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
could not open trace file /u00/app/oracle/admin/DB/udump/BITN1234.trc
I have already (from my PRO*C code and from command line)...
- made sure that the file is in the directory.
- run this from the udump directory, where the .trc file is...didn't work.
- run this from the udump directory, and specifying explicitely the
complete path anyway in the tkprof line (redundant...I know)...didn't work.
- tried to copy the file to another directory in order to run the tkprof,
and it returns:
cp: BITN1234.trc: The file access permissions do not allow the specified
action.
- tried changing privileges with:
chmod a+r BITN1234.trc
and it returns:
chmod: BITN1234.trc: Operation not permitted.
- tried to run tkprof01 instead of tkprof and it returns:
We trust you have received the usual lecture from the local System Administrator. It usually boils down to these two things:
#1) Respect the privacy of others.
#2) Think before you type.
View 3 Replies
View Related
Nov 16, 2011
I executed a query which executed quickly (1.7 seconds) but since its output took time in displaying on the console the time shown by 'set timing on was 39.5 seconds
also I took trace (tkprof) for the same.My query is why the timings under 'Total Waited' (43.19 and 1.69) are not added to the elapsed time 1.83 seconds
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.06 0 10 0 0
Fetch 758 0.03 1.77 0 0 0 11345
------- ------ -------- ---------- ---------- ---------- ---------- ----------
total 760 0.03 1.83 0 10 0 11345
[code]....
View 1 Replies
View Related
Apr 9, 2012
I have just migrated database to 11.2 ..Migration is successfull and now database is in open mode working fine.BUT i m getting following mesage in alert log file
"Time drift detected. Please check VKTM trace file for more details."I m using windows platform.
View 4 Replies
View Related
May 7, 2010
We are facing one issue on one of the database. The database is generating large trace files(14000) from last two days. That consumes around 15G space on the disk. And the content of the trace files is not having any meaningful message to debug:
cat /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc
*** TRACE DUMP CONTINUES IN FILE /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc ***
Dump file /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc
*** TRACE DUMP CONTINUED FROM FILE /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc ***
... (Many lines with above message)
The alert log is having one repeated error yesterday:
Thu May 6 22:00:03 2010
Errors in file /apps/oracle/admin/fs90uat/bdump/fs90uat_j000_11811.trc:
ORA-12012: error on auto execute of job 2647927
ORA-04063: ORA-04063: package body "ORACLE_OCM.MGMT_DB_LL_METRICS" has errors
ORA-06508: PL/SQL: could not find program unit being called: "ORACLE_OCM.MGMT_DB_LL_METRICS"
ORA-06512: at line 1
The corresponding trace file is having error:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /apps/oracle/product/10.2.0/db_1
System name: SunOS
Node name: corpqadb30
[Code] .......
View 2 Replies
View Related
Jun 3, 2013
I have a deadlock trace file to analyse and i used to be able to see the rowid as a 16 bit hex value in the trace file, which i could then query on to get the actual real world row name.I see in the 11GR2 deadlock trace the formatting is different and for the life of me i am unable to see the rowid. Has Oracle stopped reporting this now, or is their another way to get this value? The deadlock graph shows me
*** 2013-05-14 14:49:15.047
Submitting asynchronized dump request [28]
Global blockers dump end:-----------------------------------
Global Wait-For-Graph(WFG) at ddTS[0.16e] :
BLOCKED 0x4362890f8 5 wq 2 cvtops x1 TX 0x3d001b.0x18a3021 [FF000-0001-00000002] inst 1
BLOCKER 0x436288f38 5 wq 1 cvtops x28 TX 0x3d001b.0x18a3021 [102000-0001-00000002] inst 1
[code]....
View 0 Replies
View Related
May 28, 2012
taking the backup of a control file, as i am taking online backup, archive mode.
At first i have executed the statement
sql> alter database backup control file to trace;
then i have removed the control files and enterd some data in a table and committed it.As my oracle is not shutting down, so i shut aborted it. Now after saving the last file from the udump as obkp.sql i am unable to edit this file and use.
how to edit and use this file, so that i can startup my database normally.
View 4 Replies
View Related
Mar 18, 2010
I have created the below stored procedure and calling the procedure in when-button-pressed trigger. Problem here is that when I cancel the file selection in file open dialogue box its raising exception.
PROCEDURE TEST
IS
buffer_lines client_text_io.file_type;
v_outputstr VARCHAR2 (32767);
p_delimiter VARCHAR2 (10) := '","';
v_transaction_no VARCHAR2 (10);
BEGIN
[code].......
View 3 Replies
View Related
Mar 12, 2012
I am receiving errors when trying to load the control file. The errors are as follows:
SQL*Loader-500 Unable to open file (homework.ctl)
SQL*Loader-553 file not found
SQL*Loader-559 SYstem error: The system cannot find the file specified.
My control file is located directly in the C drive (C:\homework.ctl). The control file contains the following
LOAD DATA INFILE 'c:\country.dat'
APPEND INTO TABLE homework
fields terminated by ',' optionally encloded by '"'
(country, month, day)
WHEN (month='April')
On the command line, I am entering:
sqlldr system/password control=homework.ctl
View 1 Replies
View Related
Jul 23, 2013
I am having a problem getting to run an Oracle file watcher job successfully. The file watcher starts on schedule and I can see the entries in the DBA_ SCHEDULER_JOB_RUN_DETAILS table. However, I see a status of FAILED with an error 1024. Under additional information I get the following 2 Oracle errors:
ORA-01024: invalid datatype in OCI call
ORA-21560: argument 7 is null, invalid, or out of range
The job is trying to start a stored procedure with one input parameter and signature: PROCEDURE SP_HFU_NTS_FILE_WATCHER_ACTION (p_sfwr SYS.SCHEDULER_FILEWATCHER_RESULT).
View 1 Replies
View Related
Apr 8, 2012
By mistakenly Oradata file has been deleted and there is I have not any backup when we Startup the database then we get an Error as
ORA-00205: error in identifying control file, check alert log for more info
Now I want to create controlfile as
Microsoft Windows [Version 6.1.7600]
Copyright © 2009 Microsoft Corporation. All rights reserved.
C:\Users\SARASWATIMAA>SQLPLUS
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 8 23:15:09 2012
Copyright © 1982, 2005, Oracle. All rights reserved.
Enter user-name: SYS AS SYSDBA
Enter password:
[code]...
where is My Mistake in Creating Cotrolfile..I want to know that in which condition we use "SET" or "REUSE" in Create Controlfile.
View 3 Replies
View Related
Dec 2, 2010
I am creating prim and phy standby on same WIN machine. I have done with all settings. I can do TNSPING to both oracle_sid.I am trying to connect as sysdba to UP the phy standby. But it gives below error:
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
So i tried creating password file for phy standby. But gives below error:
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
I am running it from proper dir.
View 4 Replies
View Related
Apr 12, 2010
Im generating a csv file using TEXT_IO Utility.The file generated contains one blank line at the last record.Say there is 10 records. Open the generated csv file in notepad and move the cursor down. After 10 records, the cursor will move down one more time.
How to avoid that blank line as im using cursor in my script. The script is attached below.
Version:
Oracle 9i Database
Oracle Forms 6i
View 2 Replies
View Related
Mar 8, 2011
I am trying to connect to a remote database (Oracle) using my Windows terminal and I am successfully able to connect. But when I try to open a SQL File is gives the following error:
SQL > @int1.sql
SP2-0310: unable to open file
I found out that this error occurs when the file name or the path is invalid. But since I am having a remote access I really don't know the location. What can be done to remove this error?
View 1 Replies
View Related
Sep 1, 2010
I am getting the following error when i try to re size the data file.But the data file is having lot of free space.
ORA-03297: file contains used data beyond requested RESIZE value
Presently table space size is 220GB with 8 data files.As the process of the performance tuning we moved data to different table spaces.Now used space of the tablespace is 90GB.So I am trying to resize the datafile but it throw an error.
View 1 Replies
View Related
Dec 28, 2012
Oracle 11g 11.2.0.2 Expression Edition
I made the number of processes to 1 by issuing the below command.
SQL> alter system set processes = 1;
SQL>shutdown immediateI am getting the below error when I issued startup command.
SQL> startup;
ORA-03113: end-of-file on communication channelalert log:
Fri Dec 28 14:09:24 2012
PMON started with pid=2, OS id=2984
Fri Dec 28 14:09:24 2012
PSP0 started with pid=3, OS id=5788
Fri Dec 28 14:09:25 2012
ORA-00020: No more process state objects available
ORA-20 errors will not be written to the alert log for the next minute. Please look at trace files to see all the ORA-20 errors.
Process GEN0 submission failed with error = 20
USER (ospid: 4780): terminating the instance due to error 444
Fri Dec 28 14:09:25 2012
VKTM started with pid=4, OS id=1676 at elevated priority
Instance terminated by USER, pid = 4780How to startup my database again?
View 19 Replies
View Related
Jun 17, 2013
I have installed database 10gr2 on Red Hat linux 5.4 but cannot use enterprise manager. When i launch the page it shows ALL SERVICE are down ( Database , LISTENER) but all these services have been started manually. I dropped the old repository and created a new one but getting the following errors in the logfile:
Jun 17, 2013 5:20:56 PM oracle.sysman.emcp.ParamsManager getParamCONFIG:
No value was set for the parameter MODIFY_SID.Jun 17, 2013 5:20:56 PM oracle.sysman.emcp.DatabaseChecks getDbServiceNameCONFIG: No service name available. Will try to set db_unique_name.db_domainJun 17, 2013 5:20:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineCONFIG: SQLEngine connecting with SID: ghadb, oracleHome: /ORACLE/product/10.2.0/db_1, and user: SYSJun 17, 2013 5:20:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineCONFIG: SQLEngine created successfully and connectedJun 17, 2013 5:20:56 PM
[code]...
View 2 Replies
View Related
