Can I disable tracing just on deadlocks events on 11gR2?One of our applications provoke several deadlocks. I've warned the developers team several times, but it's taking time to solve it. However, these deadlocks generate trace files of several sizes (from 300M to 3G ..)The Deadlock Graph on them are very useful but the PROCESS STATE section are too long, and until the developers team fix the problem they are just filling up my user dump dest. Can I disable them or disable the PROCESS STATE section from them?
I have enabled the below trace event before running query on my session.
ALTER SESSION SET events = '19027 trace name context forever, level 0x1000';ALTER SESSION SET tracefile_identifier = store_trace;
Then I ran my query, and upon the finishing of the query, I ran the below to disable trace.
ALTER SESSION SET events = '19027 trace name context off, level 0x1000';
Now I checked back on the trace folder in my Oracle DB directory structure, but cannot find any file created by using the above set tracefile_identifier. I had previously run the query with "sql_trace" ON with tracefile_identifier, and successfully got the tracefile generated by using the identifier.
We are using 11.2.0.3.0 on solaris 10 facing slow performance, following are the Wait Events in AWR report, Also if any specific document to analyze AWR report and to pin point the performance bottleneck.
Foreground Wait Events ********************** Avg %Time Total Wait wait Waits % DB Event Waits -outs Time (s) (ms) /txn time -------------------------- ------------ ----- ---------- ------- -------- ------ direct path read 308,729 0 21,191 69 58.0 39.5 db file sequential read 208,754 0 3,742 18 39.2 7.0 cursor: pin S 19,541,899 0 2,561 0 3,668.5 4.8 [code]....
We use apex and my professor wants us to import a table model into apex. everytime i try and import my table it says "your export file is not supported". i asked my professor what to do and he said "You should gen a ddl file from designer. Then use that to upload into apex and then run.
I have read it in books that flashback uses undo data to create the flashback data or to flashback the database to a time in the past.Then, what is the role of archive files in flashback operation. Why it is mandatory to turn on archiving before turning on flashback. Also, if you remove the latest archive files, you can NOT flashback the data to a time in past (Oracle complains of missing archive files).
I created a new form for Oracle Apps, At first when I ran the form from the application all the fields backgrounds were black, so I changed the background in the property palette to white and foreground to black.
Now it shows fine but when I close this form and open another those fields are now blacked out. What should I do, I know the problem comes from the new form.
i want to write, just ONE trigger that handles all DMS events at schema level and writes the field changes to a specific log table. i wanna to write like 'FOR EACH FIELD' as for each row (& also each table). it turns in the fields section and if the 'old' and 'new' values isnt same, it triggers this function & writes changes to log.
ex. is like:
FOR EACH ROW FOR EACH FIELD if (old.value != new.value) insert into LOG(..., old.name,new.name) values (..., old.value, new.value) NEXT // FIELD NEXT // ROW
I have a table with around half a million rows. I would like to determine how many sequential events occur per device per unique group of events. The requirement is that the events continue to occur within 1 second of each other, every second, with no gaps. For example, in the sample below there is a sequence of 2 events for device 2737, and another sequence of 5 events for device 2737. If there was a 1 second interval with no event (Signal_time) then that would be the end of one group of events, this is also shown below.
Using Oracle 11.2.0.2.0
DEVICE_ID SIGNAL_TIME 4401 17-JUN-12 12.59.59 PM 2332 02-MAY-12 12.59.59 PM 1086 30-MAY-12 12.59.58 PM 2737 17-JUN-12 12.59.58 PM -- start of one group / sequence of events 2737 17-JUN-12 12.59.58 PM -- end of one group / sequence of events
[Code]...
-- start of one group / sequence of events
2737 16-JUN-12 11.59.59 PM 2737 16-JUN-12 11.59.59 PM 2737 17-JUN-12 12.00.00 AM 2737 17-JUN-12 12.00.01 AM
-- end of one group / sequence of events
2737 17-JUN-12 12.00.03 AM
-- this is excluded from the above group of 5 events, but this may be the start of another group
In my awr reports I have CPU time(in seconds) as one of top 5 timed events.Does that mean oracle is waiting for my cpu to execute the statements.But my cpu usage is 0-10% always
registration forms for events (like Technology days and so on) with Apex? I want to build up something like that where customers can register for several events.
What is needed:
registration form with a limited registration (e. g. 80 customers) e. g. create a trigger?
I am using 11.2.0.3.0 version of oracle. As told by the DBAs that two days back the system realised high wait_class i.e 'Application' wait, and its a lot high than regular value as per our system and we need to dig it down, to avoid any future issue. now using below query , i found that the high wait time due to wait class 'Application' is actually belongs to particular event 'SQL*Net break/reset to client', and the sample time was '9 AM' morning.
select time, round(max(case when event = 'SQL*Net break/reset to client' then time_waited_delta/1e3/decode(total_waits_delta,0,1,nvl(total_waits_delta,1)) end) ,2) SQL_break_reset_client, round(max(case when event = 'Wait for Table Lock' then time_waited_delta/1e3/decode(total_waits_delta,0,1,nvl(total_waits_delta,1)) end),2) Wait_for_Table_Lock , round(max(case when event = 'enq: KO - fast object checkpoint' then [code]....
Now i want to track it down further to the 'session/sql query/application' level resulting into such high value of wait time. so i queried, dba_hist_ active_ session_history, for the same sample duration (8.30 to 9 am) having event 'SQL*Net break/reset to client', and got two sessions(123,154) and their serial# , but there i got one sql_id(3ahgrey10ogh i.e a 'SELECT' query) specific to one session(123) but for other(125) no sqlid, and also SUM (wait_time + time_waited) is showing '0'.
Then i just removed the sampletime filter from the below query and observed that the same 'same session(123)+session serial#' was activated since 4 days back and was experiencing same waitevent 'SQL*Net break/reset to client', (it was having normal wait event 'db file sequential read' for sometime then after it went for this event ).
We have been using XLA to capture events on TimesTen for a while now without any issues. We were on TimesTen 7.0.5 and then moved to 11.2.2.3.0 and now 11.2.2.4.0. The XLA processes used Java 6 64 bit and works well with TimesTen versions 11.2.2.4.0 - 64 bit and 11.2.2.3.0 - 64 bit, without any issues.
However, we recently upgraded to Java 7 64 bit both during build time of our XLA processes as well during runtime. The problem we see now is that XLA process upon startup processes events for a while and then after that doesnt receive any events. The process doesn't throw any errors/exceptions. If we restart the XLA process, all the unprocessed events are received and then it behaves normally for a while after which it fails to receive any further events.
Is there any issue with Java 7 64 bit and the TimesTen XLA API? I read the TimesTen 11.2.2.4.0 manual and it says that Java 7 and the ttjdbc7.jar have been certified to work well. Was just wondering if there were any other issues.
In addition, to debug the problem, we ran XLA on a single node and on a two safe setup. The same observations are noted. On Java 6, the process runs just fine capturing all events without any issues, but with Java 7, the issues persist.
In addition, we are only performing updates/inserts on to TimesTen, no delete actions. The OS on which TimesTen's and XLA runs is Red Hat Enterprise Linux Server release 5.7 (Tikanga).
11.2.0.3 EVENTS: Null(blank) or called a 'null event' See link. Checked the docs. I don't see anythingI think a null (blank) is for an idle wait since per the V$ACTIVE_SESSION_HISTORY spec these are not record. Am I correct?What is a 'null event'. I see a paper from Oracle magician dating to 9i that says this is an 'oracle goof'. Descriptions of Wait Events
I have a partitioned table with degree for parallelism defined as 10.
I am getting maximum wait events on PX Deq: Execute Reply.For 2 hours trace the wait event is almost 1.5 hour.
I have done some seraching and i found this.
Quote: In principle:A parallel query against a partitioned table will use one slave per partition if the query is thought to span multiple partitions, and it can use all slaves on a single partition if the query is thought to target just one partition. Unfortunately, this is NOT strictly true.
It is possible for the optimizer to decide to use parallelism at degree M when accessing N partitions. Sometimes this can lead to very inefficient, brute-force, processing when a more efficient path is available. This can be a particular problem with multi-table joins that should be partition-wise joins. You may be better off leaving the tables defined as non-parallel and adding explicit parallel hints to the code for critical queries.
So i have following questions 1) What is the meaning of PX Deq: Execute Reply. 2) Is this not recommended to use DEGREE clause in Partitioning. 3) Defining DEGREE clause in partioning of table will automatically executes DML on table PARALLELY same a PARALLEL hint clause
I ran an AWR report. The database looks fine, but a data load that loaded 1 Million rows an hour is now doing 500K per hour.
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time DB CPU 224 80.70 Other 2,668 0 28 10 9.99 System I/O 4,753 0 9 2 3.23 Administrative 1 0 6 5543 2.00 Commit 357 0 4 11 1.46
[code]....
The network value for wait: 630,601. What does this mean? Anything I should look at? When it was 1million per hour, the value was 4,563,000.
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class DB CPU 224 80.70 unspecified wait event 2,666 28 10 9.99 Other control file sequential read 4,753 9 2 3.23 System I/O switch logfile command 1 6 5543 2.00 Administrative log file sync 357 4 11 1.46 Commit
create table T3 ( node_id number(4), object_type varchar2(15) );
begin insert into T1 values(10); insert into T1 values(20); insert into T1 values(30); insert into T1 values(40); insert into T1 values(50); insert into T1 values(60); insert into T1 values(70); insert into T1 values(80);
insert into T2 values(10, 'Concept'); insert into T2 values(20, 'Concept'); insert into T2 values(110, 'Concept'); insert into T2 values(118, 'Concept'); insert into T2 values(136, 'Concept'); insert into T2 values(128, 'Concept'); insert into T2 values(80, 'Concept');
insert into T3 values(10, 'Grouping'); insert into T3 values(120,'Grouping'); insert into T3 values(130,'Grouping'); insert into T3 values(140,'Grouping'); insert into T3 values(150,'Grouping'); insert into T3 values(160,'Grouping'); insert into T3 values(70,'Grouping'); insert into T3 values(180,'Grouping'); insert into T3 values(260,'Grouping'); insert into T3 values(270,'Grouping'); insert into T3 values(280,'Grouping'); end; /
I am getting below mentioned error in alertlog file very frequently.
ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 747 ORA-06512: at "BEE_CODE_05252013.SS_INDEX_JOB_PKG", line 496 Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc: Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc: Errors in file /beprddb/diag/rdbms/beprddb/beprddb/trace/beprddb_ora_10581.trc: Tue Jul 02 15:31:15 2013 [code]....
i am using 10.2.0.4.0 version of oracle.I am having trace file info as below, for one of the query. So how should i interpret the trace file? What is the issue in the query, and the scope of improvement in the query? I have removed the query and its plans from the trace file, i have only posted the wait sections.
I have a procedure in the live environment , which operate in 2 mode.
1 regular load at 10 min 2 nightly
The code is same except they set the last loaded time for both in 2 dfferent rows, so that next time run will get incremental data.
I can trace this procedure on mode 1 that is is scheduled but unable to find how the 2nd one is getting trigger every night. there is no jobs corresponding to that. Is there any way i can find which method is trigger the procedure during night.
un-documented parameter _trace_files_public / I want to set this to true so my app team can review trace files. better way to proceed to open read permissions for non oracle users.
