Ora-01578 ORACLE Data Block Corrupted For New Site
Nov 14, 2012
Oracle 10gR2 on red hat.
I have an application that writes blobs via pro*c. It is running at several sites without errors for a few years now. One of the newer sites has started reporting "ora-01578 ORACLE data block corrupted".
I've tried using rman backup validate - it does not report any errors.
I've tried using rman restore and recover to correct the problem.
I've tried deleting the file with the corrupt block and using rman restore and recover to recreate it.
In any of the above cases, I do not see any errors being encountered, and when I restart the application, it works for a while and then starts reporting "ora-01578 ORACLE data block corrupted".
I've had the client do a physical check of the disk and it indicated the media was okay.
We've failed over to the standby system, so I have a wee bit of breathing room - but I'm going to be away for 4 days and will have to get back on this when I get back. I'm a little puzzled that I can fix it for a short while and then it breaks again.
View 2 Replies
ADVERTISEMENT
Feb 11, 2013
we are running oracle 9iR2 ( 9.2.0.1.0) on windows server 2003 R2 and facing ORA-01578: ORACLE data block corrupted (file # 17, block # 312316)
SQL> select * from payrol.slip;
select * from payrol.slip
*
ERROR at line 1:
ORA-01578: ORACLE data block corrupted (file # 17, block # 312316)
ORA-01110: data file 17: 'E:ORACLEORADATAMTMASYSMTM.ORA'
ORA-26040: Data block was loaded using the NOLOGGING option
1) SELECT name FROM v$datafile WHERE file#=17;
output
E:ORACLEORADATAMTMASYSMTM.ORA
2) SELECT block_size FROM dba_tablespaces
WHERE tablespace_name =
(SELECT tablespace_name FROM dba_data_files WHERE file_id=17);
output
8192
3) SELECT tablespace_name, segment_type, owner, segment_name
FROM dba_extents
WHERE file_id = &AFN
and &BL between block_id AND block_id + blocks - 1;
file_id=17, BL=312316
output
SYSMTM TABLE PAYROL SLIP
I am not using RMAN. How to recover payrol.slip table ?
View 7 Replies
View Related
Sep 4, 2012
I am having 3 oracle database instances running on 3 seperate Linux Node(RHEL Node).
Instance -1 named - DS
Instance -2 named - MIS
Instance -3 named - OAS
Among of these 3 nodes, we are facing Block Corruption issues with sysaux tablespace.Error in Instance name DS is
Errors in file /u01/home/dba/oracle/diag/rdbms/ds4db/DS/trace/DS_j000_655388.trc (incident=300847):
ORA-01578: ORACLE data block corrupted (file # 2, block # 38428)
ORA-01110: data file 2: '/DSdb1/dssysaux.dbf'
ORA-26040: Data block was loaded using the NOLOGGING option
GATHER_STATS_JOB encountered errors. Check the trace file.
[code]....
for this I googled and found some solution as oracle doc [430230.1] related to sysaux couruption.After this again we are facing the same issue in sysaux tablespace.
View 19 Replies
View Related
Nov 21, 2012
What i have to do for this error:
ORA-01578: ORACLE data block corrupted (file # 3, block # 42348)
ORA-01110: data file 3: '+DGMETA/metadb/datafile/sysaux.257.783871811'
Wed Nov 21 09:30:00 2012
Corrupt Block Found
TSN = 2, TSNAME = SYSAUX
RFN = 3, BLK = 42348, RDBA = 12625260
OBJN = 50439, OBJD = 50439, OBJECT = MGMT_STRING_METRIC_HISTORY_PK, SUB
OBJECT = SEGMENT OWNER = SYSMAN, SEGMENT TYPE = Index Segment
Database version is :- Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
View 11 Replies
View Related
Jun 24, 2013
We are facing block corruption error and it's refer to system datafile (SYSTEM01.DBF).Below is the script through it, we can come to know about the extent.
select segment_name, segment_type from dba_extents
where file_id=1 and 134144 between block_id and block_id+blocks-1;
select owner,index_name,index_type, table_name from dba_indexes
where index_name='I_CDEF3';
How to resolve the problem as it is related to system datafile? We tried to drop the index but system is not allowing to do.
ORA-00701 - object necessary for warmstarting database cannot be altered.
View 7 Replies
View Related
Dec 21, 2010
Do we have any plan to create DR ( disaster site) for ORACLE 10G standard version. Since, Data Guard is not available with Standard version, can we have any another plan for the same.
View 5 Replies
View Related
May 20, 2013
I am the only DBA in my company and Oracle just crashed on me. The data is corrupted as well as the data on my backup! Is there ANY way I can get the information back?
View 2 Replies
View Related
Aug 18, 2012
We have an Oracle application 12.1.1 running with oracle database 10.2.0.4 and we're using HP-UX itanium 11i v3 servers for both application and database, our requirement is to establish a Disaster Recovery site out of our building to ensure data protection.
What is the best option we can use to reduce the cost and to implement the DR site? can we use data guard ? and will be the configurations and requirements for it?
View 9 Replies
View Related
Dec 24, 2007
m trying to create replications of data from the M.V. site. to master site
/* AT MASTER SITE */
1. MASTER REPLICATE GROUP
2. MASTER REPLICATE OBJECT
3. REPLICATION SUPPORT
4. REPLICATION ACTIVITY
5. M.V. LOG
/* AT M.V. SITE */
1. MATERIALIZED VIEW (M.V)
2. DBMS_REFRESH.MAKE (REFRESH GROUP)
AND I AM NOT ABLE TO CREATE
1. CREATE_MVIEW_REPGROUP
2. CREATE_MVIEW_REPOBJECT
IN M.V. SITE , and i am getting following error while creating REPGROUP
CODE
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPGROUP (
3 gname => 'emp_repg',
4 master => 'orc1',
[code]..
View 1 Replies
View Related
Aug 25, 2012
1.What are the basic things we need to analyze before we recommend the business to go for oracle Dataguard for DR setup?
2. Do you know any technology that will replicate the schema from one datacenter[one primary database ] to another datacenter [secondary or replication database]?
3. What are the various option to configure the disaster recovery plan at schema level?
View 3 Replies
View Related
Mar 23, 2013
I am new to Oracle and a beginner in Data Guard.
1) How to find archive log gap from Primary Database site?
2) Do I need the DB_UNIQUE_NAME when setting the LOG_ARCHIVE_DEST_2 ? What is the purpose of DB_UNIQUE_NAME in LOG_ARCHIVE_DEST parameter?
3) If archivelog gap happens standby db goes out of sync with the primary database. What does out of sync actually mean?
4) Primary DB knows where to transport redo data based on the location mentioned in LOG_ARCHIVE_DEST_n of Primary DB. Am I correct in my understanding?
View 3 Replies
View Related
Feb 7, 2013
Recently we have a weird thing happens in our Oracle Queries to the views return "ORA-00942: table or view does not exist" unless there are a where clause
select * from VIEW1 failed
select * from VIEW1 where 1 = 1 works
What happening? and how we can fix it?
View 11 Replies
View Related
Nov 19, 2010
i have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
View 12 Replies
View Related
Apr 11, 2013
I have two block....both are the control block.. in first block i select the date and in second block the data of that date is populated.but the data is populated using cursor in when-button-pressed trigger of that first block button.in cursor the data is selected and placed in field of detail block using into clause.... each field and one item of detail block is srno which is create in post-query of detail block using :sysyem.trigger_record.
Now i want after populated the detail block the data is sorted desc one of the field of the detail block..Can this possible using set_block_property() of block although the block is control block if yes where i should do this?
View 7 Replies
View Related
Nov 3, 2011
I am working on forms 6i. I have one data block based on table EMP.
Datablock-A: Empno, Ename, Sal
I have FIND Screen: Empno, Ename, FIND Button.
I can search the data through FIND Screen and populate data in Datablock A.
I am using below logic to search data through FIND Screen.
When-Button-Pressed(FIND Button): calling 'EXECUTE_QUERY'.
In Pre-query trigger of DatablockA:
copy(:FIND.EMPNO,'BLOCKA.EMPNO');
copy(:FIND.ENAME,'BLOCKA.ENAME');
It's working fine. But below case is failing.
Let us say, if i enter empno 10 (which is not there in database) in FIND Screen --> press FIND Button, it's showing up 'QUERY CAUSED NO RECORDS', Till this point it's working fine;. But after this, if i press CTR+F11 in block A, it's not pulling records. only this case it's not pulling records.
But if i enter something else in FIND Screen, if it returns any data, then if i press CTR+F11,it's pulling all records.
why it's failing to pull records if i try to query data in first case only.
View 2 Replies
View Related
Aug 22, 2013
I have a sql to pull all payments from vendors for a specific time period; however, now tasked to only show the Address of each Tax Reporting Site. I have tried several commands but have not been successful.
View 7 Replies
View Related
Sep 18, 2012
So usually joining a local table and a remote table (much larger table), the best practice is using a /*+ DRIVING_SITE(remote table) */ hint.
*CASE1:
INSERT INTO another_local_table
SELECT /*+ DRIVING_SITE(remote_table) */
FROM local_table
,remote_table@remotedb
WHERE join condition
*CASE2:
However I saw this particular
FOR x IN Select id From local_table l
LOOP
INSERT INTO another_local_table
[code]...
So far I haven't seen the explain plan of both cases since most of the tables are Global temporary tables. But in terms of the logic of the two cases and the common best practice, logically doesn't CASE1 should have a better performance?
For me, its like taking a trip to a grocery. CASE1 buys all that you need, one time, it will take you a half-day trip perhaps. However CASE2 is like quickly buying a grocery item, one at a time, for several short trips. You'll save on gas on CASE1 right.
View 1 Replies
View Related
Oct 18, 2008
I get below error when i tried to add the master site to the master definition site.
SQL> BEGIN
2 DBMS_REPCAT.ADD_MASTER_DATABASE(
3 gname => 'TEST',
4 master=> 'testdb2',
5 use_existing_objects => FALSE,
6 copy_rows => FALSE,
[code].......
View 5 Replies
View Related
Nov 30, 2012
I have installed SQL navigator 5.0 version in my PC. Once it has been successfully installed, I clicked on SQL navigator icon in my PC after that it's prompted me for asking authorization Key. I have entered the following key.
3-37993-18701-28024-78347
Once I have entered the key is is prompting me for asking site message. what message I should enter.
View 1 Replies
View Related
May 4, 2012
I have an application written in Pl SQL Oracle which suppose to send email using utl_smtp. For users that are using Exchange Server 2010 Windows the hyperlinks inside the email are correctly but for users that have a Postfix version installed on a Debian 5 Linux mail server the hyperlinks contains some extra spaces. I think that the CRLF that I'm using inside my code to create the MIME message is not ok interpreted.
View 5 Replies
View Related
Mar 12, 2012
I was having troubles with deleting some files and folders in windows 7, I used a software called SPAM. It works fine. Do I have any other options to do that thing? Or is it ok to be with SPAM? This tool has more options too.
View -1 Replies
View Related
Dec 19, 2012
We have Oracle 10.2.0.3 database installed on Itanium server.
1. One day we found some packages got invalid & not compiling at all with error – ORA-00600: internal error code, arguments: [4097], [], [], [], [], [], [], [].
2. Then we successfully restored the database from old RMAN backup of previous date that caused this error.
3. After 2 days again we found the same error in alert_prd log - ORA-00600: internal error code, arguments: [ORA-00600: internal error code, arguments: [4097], [], [], [], [], [], [], [] ORA-06512: at "SYS.DBMS_STATS", line 19089 ], [], [], [], [], [], [], []
4. Then for testing we exported database using exp command & found 3 tables are not exporting because of data block corruption issue.
5. Then we truncated the data from all 3 tables and then able to export successfully.
6. After all this we manually run SYS.DMS_STATS job but found same error logged in prd_alert log.
This looks like, still database block corruption issue is there & we are unable to cure it 100% This is a production system & in very critical state now.
View 1 Replies
View Related
Mar 4, 2011
while replicating the master site via materialized views, in mViewGroups i issued:
BEGIN
DBMS_REFRESH.MAKE (
name => 'mvadmin.hamza_refg',
list => '',
next_date => SYSDATE,
interval => 'SYSDATE + 1/1440', -- for test purpose i used such a small interval
implicit_destroy => FALSE,
rollback_seg => '',
push_deferred_rpc => TRUE,
refresh_after_errors => FALSE);
END;
in my previous attempt it worked all fine... i had a change in senerio, so i did my replication again from scractch using the same old spool in a new installation but even after 3 tries on replicating from scratch my objects are not getting refreshed automatically. even when i attempt to refresh the group it does not work. it works only when i refresh each of the participating object of the group manually.
View 4 Replies
View Related
Sep 17, 2013
I have a strange problem of connecting Oracle Forms6i from our Remote site.actually we change our IP address of lease line, we connect to it.but when we connect locally,forms are running without any problem,but when we connect globally or from other sites it can't able to connect,even sql prompt and toad also connect from remote site,but when we try to connect forms(forms runtime) it gives error message(ORA-12203: TNS:unable to connect to destination).when we connect this application from local application(Forms) it can connect well but from globally it can't able to connect.
View 1 Replies
View Related
Aug 28, 2012
i want to create tab menu like in sumneva site URL.....
View 13 Replies
View Related
Jul 1, 2010
recreate paramater file if you lost init.ora or spfile.ora
STEPS
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'D:ORACLEORA92DATABASEINITGPT2.ORA'
How to resolve ORA-01078 with LRM-00109 error?
For resolving these error, you should need to replace init.ora or spfile if you have backup of same files. If you don't have backup then go to alert.log and copy all parameters in one file and save as "init.ora". Modify same init.ora with some parameters which need single quotation mark " ' " like background_dump_dest,controlfiles,db_name and "dispatchers ......)". Connect as sysdba in SQL*Plus and execute command "create spfile from pfile=" or startup pfile or startup.
View 2 Replies
View Related
Feb 5, 2013
I have a table enrty in dba_tables:
SQL> select OWNER,TABLE_NAME from dba_tables where TABLE_NAME='Viep_Porteur_Etudiant';
OWNER TABLE_NAME
------------------------------ ------------------------------
IEP_PESSAC Viep_Porteur_Etudiant
But this tables doesn't exist then I can't drop this table:
SQL> desc IEP_PESSAC.Viep_Porteur_Etudiant;
ERROR:
ORA-04043: objet IEP_PESSAC.Viep_Porteur_Etudiant inexistant
SQL> drop table IEP_PESSAC.Viep_Porteur_Etudiant;
drop table IEP_PESSAC.Viep_Porteur_Etudiant
*
ERREUR à la ligne 1 :
ORA-00942: Table ou vue inexistante
How can I clean dba_table? I suppose that that's happened because the user tablespace was full when he tried to create this table...
View 6 Replies
View Related
Aug 8, 2013
i found a temporary tablespace was corrupted,what happens to the database level, how to recover that tablespace? If need any recovery?
View 3 Replies
View Related
Mar 3, 2012
how will you find your db is Corrupted or crashed. how will u recover it.
View 2 Replies
View Related
Apr 27, 2011
I am using oracle 10g R2. Some how control file is corrupted and database is not open. and there is no backup of control file. Now i need to open the database without recreating the database.
View 5 Replies
View Related
