Data Guard :: Oracle 10G - Disaster Recovery Site
Dec 21, 2010
Do we have any plan to create DR ( disaster site) for ORACLE 10G standard version. Since, Data Guard is not available with Standard version, can we have any another plan for the same.
View 5 Replies
ADVERTISEMENT
Aug 18, 2012
We have an Oracle application 12.1.1 running with oracle database 10.2.0.4 and we're using HP-UX itanium 11i v3 servers for both application and database, our requirement is to establish a Disaster Recovery site out of our building to ensure data protection.
What is the best option we can use to reduce the cost and to implement the DR site? can we use data guard ? and will be the configurations and requirements for it?
View 9 Replies
View Related
Aug 25, 2012
1.What are the basic things we need to analyze before we recommend the business to go for oracle Dataguard for DR setup?
2. Do you know any technology that will replicate the schema from one datacenter[one primary database ] to another datacenter [secondary or replication database]?
3. What are the various option to configure the disaster recovery plan at schema level?
View 3 Replies
View Related
Mar 29, 2011
I have a SAN systems with primary and secondary interfaces. i need to know what is best practice of oracle to use disaster recovery features, with automatic or manual failover concept.
example.
Primary Server Duty Station 1 New York
Secondary Server Duty Station 2 Los Angelous
requirement : If primary server in DS 1 gets fire and completed get down then secondary server DS 2 should become primary server and reply to client request with AUTO or Manual failover concept.
View 6 Replies
View Related
Mar 23, 2013
I am new to Oracle and a beginner in Data Guard.
1) How to find archive log gap from Primary Database site?
2) Do I need the DB_UNIQUE_NAME when setting the LOG_ARCHIVE_DEST_2 ? What is the purpose of DB_UNIQUE_NAME in LOG_ARCHIVE_DEST parameter?
3) If archivelog gap happens standby db goes out of sync with the primary database. What does out of sync actually mean?
4) Primary DB knows where to transport redo data based on the location mentioned in LOG_ARCHIVE_DEST_n of Primary DB. Am I correct in my understanding?
View 3 Replies
View Related
Mar 31, 2011
i have done oracle data guard between two databases (database A is the primary) and (database B is the standby), and it was working fine for two weeks, then the network admin did some changes on the firewall on standby side, which made the primary database can not write on standby redo log , so archives was generated on primary and do not generated on standby by, now we solve the firewall probelm and new archives generated on primary is generated on atandby too, but now i have a gap in archives on standby database and standby database now is not synchronized with primary database, and data changes happen on primary is not reflected on standby, also archives that were generated on primary and did not generated on standby during the problem time is not registered in V$ARCHIVED_LOG neither on primary database nor on standby database
View 1 Replies
View Related
Nov 14, 2012
Oracle 10gR2 on red hat.
I have an application that writes blobs via pro*c. It is running at several sites without errors for a few years now. One of the newer sites has started reporting "ora-01578 ORACLE data block corrupted".
I've tried using rman backup validate - it does not report any errors.
I've tried using rman restore and recover to correct the problem.
I've tried deleting the file with the corrupt block and using rman restore and recover to recreate it.
In any of the above cases, I do not see any errors being encountered, and when I restart the application, it works for a while and then starts reporting "ora-01578 ORACLE data block corrupted".
I've had the client do a physical check of the disk and it indicated the media was okay.
We've failed over to the standby system, so I have a wee bit of breathing room - but I'm going to be away for 4 days and will have to get back on this when I get back. I'm a little puzzled that I can fix it for a short while and then it breaks again.
View 2 Replies
View Related
Sep 5, 2013
in a RAC multi-node environment with single instance dataguard..Recovery is not running automatically I have to re-run the recovery command to make them sync and this command works for already archived log files no upcoming archive log file applied I have to re-run the recovery command again for newly archived log files.
View 2 Replies
View Related
Apr 23, 2013
I have done the configs as per the guide here [URL] .... This is a physical standby db
Primary initBP1.ora
compatible = "11.2.0"
log_archive_dest_1 = "LOCATION=H:oracleBP1oraarchBP1arch VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=BP1"
log_archive_dest_2 = "SERVICE=BP1_DR VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
[code]...
How I do I make sure that the DR site is recovering automatically ?
View 10 Replies
View Related
Mar 15, 2012
My standby database was working fine which was running in maximum performance mode .Suddenly i found that logs are not being applied though archived logs are received from primary database.i issued the command in mount mode: alter database recover managed standby database disconnect from session;
altered database this command runs successfully. but MRP process in not initiated which i confirmed with the query (select process,status from v$managed_standby;)
View 1 Replies
View Related
Nov 9, 2012
I'd like to stop Recovery in specific time. For instance ; My db works Day-1 and Every day Recovery starts 20:00 and finish 05:00. If it is possible that when DB time reach to sync 03:00, I'd like to stop recovery.
DB version Oracle 10.2.0.5 .....
View 5 Replies
View Related
Dec 1, 2011
I have created dataguard between two instances hosted in two different servers. I have done switchover from primary to standby & then again standby to primary with DGMGRL utility.
1- When I done switchover to primary & trying to open standby database in readonly mode it was giving below error-
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
Why this error was coming ?
2- As I was not able to open standby database in read only mode, I have executed below command-
alter database recover managed standby database disconnect from session;
which return an error as-
ORA-01153: an incompatible media recovery is active
After this I have executed-
alter database recover managed standby database cancel;
which executed successfully.
& then after standby database open in read only mode.
Why above error was coming ?
3- After this I had tried to check the checkpoint_change# & controlfile_change# from primary database and result shows both number were different.
Why they are not matching ?
View 6 Replies
View Related
Oct 22, 2013
i have found an issue regarding log archiving on dest1. yesterday one sequence number 76871 not archive to dest1.alert logfile content as follow. i configure standby and ship archive manually with window copy command. i need this archive to complete recovery on standby database.
Mon Oct 21 09:29:28 2013
ARC2: Completed archiving log# 3 seq# 76869
Mon Oct 21 09:39:28 2013
Thread 1 advanced to log sequence 76871
Current log# 2 seq# 76871 mem# 0: D:ORACLEORADATAORC1REDO02.LOG
[code]....
View 7 Replies
View Related
Sep 19, 2012
I noticed that my standby server was behind the prduction one.In the error log I noticed: ORA-00600: internal error code, arguments: [kcbr_apply_change_11], [], [], [], [], [], [], [], [], [], [], []
then
MRP0: Background Media Recovery terminated with error 448
Recovered data files to a consistent state at change 286116915
This error happens in sequence: Recovery of Online Redo Log: Thread 1 Group 4 Seq 8830 Reading mem 0I found this archive log in standby and it is same size as in the production one.
View 9 Replies
View Related
May 6, 2011
oracle version: 10gr2
os:windows 32
I have configured a physical standby database.
I have set the physical standby database to open read mode for a short while.
according to [URL] in order to set db in for from open read-only to applying redo data
Quote:
To change the standby database from being open for read-only access to performing Redo Apply:
Terminate all active user sessions on the standby database. Restart Redo Apply. To start Redo Apply, issue the following statement:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
2> DISCONNECT FROM SESSION;
To enable real-time apply, include the USING CURRENT LOGFILE clause:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
2> USING CURRENT LOGFILE;
this is what happen
SYS@ngdr> alter database recover managed standby database disconnect session;
alter database recover managed standby database disconnect session
*
ERROR at line 1:
ORA-00274: illegal recovery option SESSION
SYS@ngdr> alter database recover managed standby database using current logfile;
okay since I encountered the illegal recovery options session, I decided to use alter database recover managed standby database using current logfile; now the session seems to be hanging forever.
View 3 Replies
View Related
Sep 10, 2012
How to find applied_time in standby database managed recovery mode (*PHYSICAL STANDBY*).
View 3 Replies
View Related
Dec 24, 2007
m trying to create replications of data from the M.V. site. to master site
/* AT MASTER SITE */
1. MASTER REPLICATE GROUP
2. MASTER REPLICATE OBJECT
3. REPLICATION SUPPORT
4. REPLICATION ACTIVITY
5. M.V. LOG
/* AT M.V. SITE */
1. MATERIALIZED VIEW (M.V)
2. DBMS_REFRESH.MAKE (REFRESH GROUP)
AND I AM NOT ABLE TO CREATE
1. CREATE_MVIEW_REPGROUP
2. CREATE_MVIEW_REPOBJECT
IN M.V. SITE , and i am getting following error while creating REPGROUP
CODE
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPGROUP (
3 gname => 'emp_repg',
4 master => 'orc1',
[code]..
View 1 Replies
View Related
Jun 15, 2012
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME
--------------------------------------------------------------------------------
D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
D:ORACLEAPPADMINISTRATORORADATAMFSREDO02.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSREDO03.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
View 5 Replies
View Related
Jul 5, 2011
We have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
View 3 Replies
View Related
Feb 16, 2012
Log shipping stopped logging/shipping into the Standby Database in one of our Oracle Data Guard Servers about two month ago and there was no change carried out as at that time. The Data Guard has only one Standby database. I have been managing the log shipping and recovery manually.
View 1 Replies
View Related
Feb 28, 2012
There are two servers.one in HP-UNIX and another is solaris.
I would like to configure a logical standby using oracle 9i...Is it possible in 9i?
View 7 Replies
View Related
Oct 17, 2012
My physical standby - Oracle 11gr2 on RHEL5.6
I want to run RDA on the physical standby, should I run in open read-only mode ?
View 3 Replies
View Related
Apr 1, 2011
As I have implemented data guard in my server. But its not generating archive in standby. May be I am missing some steps. Can any one share Dataguard / standby in oracle 10gR1 steps to be followed.
View 7 Replies
View Related
Sep 14, 2010
I am planning to use Data Guard facility in Oracle 10g database.
1) I would like to have a standby database, which can be used if the primary goes down and also for reporting and other queries (read-Only).
2) What is the difference between Physical and Logical standby database. I have to explain non-technical users (management) regarding this.
3) What is Sync and Async redo log apply?
4) When i manipulate data (Insert,Delete,Update) in logical standby database, will these changes reflect in Primary database synchronously?
5) Which type of REDO APPLY is better: Managed Recovery Process(MRP) or Real Time Apply(RTA)?
6) can the redo data be deleted if its obsolete or is it deleted automatically by oracle?
7) If i want to take backup, should i take it from primary or standby database? If standby, then the database should be in which mode (Read-only or Recovery Mode)
View 1 Replies
View Related
Oct 17, 2012
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
View 1 Replies
View Related
Feb 17, 2011
There is a Single Instance production server Oracle 9iR2 [9.2.0.8] OS HP-UX PARISC 11i v1 to RAC.
Now we want to migration this server with minimum downtime to Oracle 11gR2 [11.2.0.2] in RAC environment OS HP-UX 11i v3 Itanium DOwn time must be minimum. what will be the procedure ?
View 6 Replies
View Related
Jul 26, 2012
how to change non - SYS oracle users' password in data guard envirnment. We all know that for SYS password change in data guard. DBA has to change in primary database by either "alter user SYS identified by xxxx" or create password file with orapwd.
Then scp password file to standby database. However, if I want to change SYSTEM or DBSNMP passwords, I change on primary with " alter user ....." SQL, then new passwords will be login dictionary. But this new SYSTEM pqssword will be shipped with redo log to standby and SYSTEM password on standby will be updated? I need technical answer on this question
View 7 Replies
View Related
Nov 6, 2012
my customer wants to create a standby database for his production database (Oracle Standard Edition 11g R2 @ Windows 2008 R2 64 Bit). Now any proof-of-concept which explains shortly the concept and how to achieve it.
View 4 Replies
View Related
Jun 30, 2008
I'm trying to create a physical standby database on my Oracle9i DB runing on WinXP.
Note: I have both Primary and Standby on the same system.
Actually everything went well .... I did created the standby DB but the problem is I can not start my primary DB if my standby DB is mounted. I get this error:
ORA-01102: cannot mount database in EXCLUSIVE mode
And when I read about the error message I learnt that I should start my DB in compatible mode ...
View 5 Replies
View Related
Jan 18, 2011
i want to configure my present Data Guard Setup with Enterprise Manager...and on the Enterprise Manager grid control page i am not seeing any Data Guard option.....i am using oracle 10gR2 and Windows XP.
How to use enterprise manager for configuring Data Guard.
View 9 Replies
View Related