I have done the configs as per the guide here [URL] .... This is a physical standby db
Primary initBP1.ora
compatible = "11.2.0"
log_archive_dest_1 = "LOCATION=H:oracleBP1oraarchBP1arch VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=BP1"
log_archive_dest_2 = "SERVICE=BP1_DR VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
[code]...
How I do I make sure that the DR site is recovering automatically ?
i have done oracle data guard between two databases (database A is the primary) and (database B is the standby), and it was working fine for two weeks, then the network admin did some changes on the firewall on standby side, which made the primary database can not write on standby redo log , so archives was generated on primary and do not generated on standby by, now we solve the firewall probelm and new archives generated on primary is generated on atandby too, but now i have a gap in archives on standby database and standby database now is not synchronized with primary database, and data changes happen on primary is not reflected on standby, also archives that were generated on primary and did not generated on standby during the problem time is not registered in V$ARCHIVED_LOG neither on primary database nor on standby database
View 1 Replies View Relatedi have found an issue regarding log archiving on dest1. yesterday one sequence number 76871 not archive to dest1.alert logfile content as follow. i configure standby and ship archive manually with window copy command. i need this archive to complete recovery on standby database.
Mon Oct 21 09:29:28 2013
ARC2: Completed archiving log# 3 seq# 76869
Mon Oct 21 09:39:28 2013
Thread 1 advanced to log sequence 76871
Current log# 2 seq# 76871 mem# 0: D:ORACLEORADATAORC1REDO02.LOG
[code]....
oracle version: 10gr2
os:windows 32
I have configured a physical standby database.
I have set the physical standby database to open read mode for a short while.
according to [URL] in order to set db in for from open read-only to applying redo data
Quote:
To change the standby database from being open for read-only access to performing Redo Apply:
Terminate all active user sessions on the standby database. Restart Redo Apply. To start Redo Apply, issue the following statement:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
2> DISCONNECT FROM SESSION;
To enable real-time apply, include the USING CURRENT LOGFILE clause:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
2> USING CURRENT LOGFILE;
this is what happen
SYS@ngdr> alter database recover managed standby database disconnect session;
alter database recover managed standby database disconnect session
*
ERROR at line 1:
ORA-00274: illegal recovery option SESSION
SYS@ngdr> alter database recover managed standby database using current logfile;
okay since I encountered the illegal recovery options session, I decided to use alter database recover managed standby database using current logfile; now the session seems to be hanging forever.
How to find applied_time in standby database managed recovery mode (*PHYSICAL STANDBY*).
View 3 Replies View RelatedI have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
My steps for testing as below:
1.create a primary database
2.duplicate a physical standby database;
3.turn on flashback on both databases.
4.record SCN xxx on physical standby database.
5.convert physical standby to logical standby (using keep identity statement)
6.flashback to logical standby to xxx
7.convert logical standby to physical standby
8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
GROUP# THREAD# SEQUENCE# sizeMB ARC STATUS T
---------- ---------- ---------- ---------- --- ---------------- -
1 1 115 512 YES CLEARING O
2 1 116 512 YES CURRENT O
6 1 114 512 YES CLEARING O
4 1 112 512 YES CLEARING O
5 1 113 512 YES CLEARING O
3 1 111 512 YES CLEARING O
6 rows selected.
[code]...
Above result is from standby database.I am trying to understand the concept of standby redo log.My stadby database protection_mode is MAXIMUM PERFORMANCE.
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
I'm trying to prepare data guard operation on the virtual machines.
1. I have install Oracle database without start up database on the standby server.
2. I try to connect this db by sysdba, but failed!
Quote:
C:>sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I'm using instruction below: [URL]
Why I can't login to database?
I have to implement Physical standby using same SID. parameters required to set on Primary and standby. Also what entries are required to do in TNS file. Recently we have faced hardware failure.
View 10 Replies View Relatedi have attended an interview there i got a question like--->There are 100 archives generated in standby in that a series of five archives are missing and those are not available in the primary then how will you do.....
View 2 Replies View RelatedI want to get the execute plan of a sql in standby database(read only),but failed,how can i do?
SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access
SQL> select count(1) from hxl.tb_objects;
COUNT(1)
----------
22238018
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ ONLY
I have an issue whereby our standby instance was down for a couple of days and when it came back online we found an archivelog file was missing, so recovery only happened up to a point. It appears that the archivelog was deleted therefore we are unable to continue with this standby. We are now planning to rebuild the standby database. As far as i know all of the steps originally performed need not be performed to complete this task.
1. Shutdown standby
2. Delete all datafiles & redo logs
3. Copy over datafiles to respective directories
4. Copy online logs and archivelogs to standby.
5. Create a control file for standby database
6. Startup mount standby database
7. start redo apply
There are two servers.one in HP-UNIX and another is solaris.
I would like to configure a logical standby using oracle 9i...Is it possible in 9i?
Difference between standby and dataguard. I assume standby and dataguard are same?
View 4 Replies View RelatedWe are planning to setup a data guard (Maximum performance configuration ) between two Oracle 9i databases on two different servers.
The archive logs on the primary servers are deleted via a RMAN job bases on a policy , just wondering how I should delete the archive logs that are shipped to the standby.
Is putting a cron job on the standby to delete archive logs that are say 2 days old the proper approach or is there a built in data guard option that would some how allow archive logs that are no longer needed or are two days old deleted automatically.
I m facing trouble to following trouble.
SQL> ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE OPEN READ ONLY
*
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/app/oracle/oradata/PBLSTAN/system01.dbf'
I want to know that what will happen when I will resize database file from 32G to 5G on primary server or add file to tablespace. Will standby server do the same automatically or I have to to something with standby server?
View 4 Replies View RelatedI have two node rac running on SAN with ASM , i want to configure a single instance standby database for this.
View 2 Replies View RelatedTo have physical standby database, the hardware and software versions should be same, including patch sets?
View 3 Replies View RelatedI did the all necessary steps required for the physical standby configuration. My standby db is mounted but not able to open.
Below are the steps.
SQL> startup mount
ORACLE instance started.
Total System Global Area 1845493760 bytes
Fixed Size 2021568 bytes
Variable Size 452986688 bytes
Database Buffers 1375731712 bytes
Redo Buffers 14753792 bytes
Database mounted.
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_2='SERVICE=demodb' scope=both;
System altered.
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=ENABLE SCOPE=BOTH;
System altered.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
Database altered.
SQL> recover managed standby database cancel;
Media recovery complete.
SQL> alter database open read only;
alter database open read only
*
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u002/app/OraDB10g/stdemo/oradata/system01.dbf'
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH; ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcrfrsetnab_found], [1], [136], [],
[], [], [], []
ORA-00600: internal error code, arguments: [kcrfrgv_scn7], [], [], [], [], [],
[], []
SQL> ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY;
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kccocx_01], [], [], [], [], [], [],
[]
I've a primary database and a physical standby.Logs are shipping perfectly from primary to standby.The logs that are applied on the standby are getting stored in a mount point(LINUX-/opt2) which consumes more space(160 GB). Will that be right if I go ahead and delete them?
My rman configurations in primary is:
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 4;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[Code]....
We recently configured data guard in test machine.Archives not applied in physical standby.Where i need to start investigation?
Primary
SQL> select THREAD#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
---------- --------------
1 301
[code]...
Today, I am learning dataguard 11.2.0.1. The docs said:A. Monitoring Standby DB Application of redo logs may be monitored by issuing the SQL command:
SQL> select client_dbid, process, sequence#, status from v$managed_standby;
In the primary database, the sequence# with the status “WRITING” would refer to the current redo log sequence#In the standby database, if the status of the process MRPO is “APPLYING LOG” and the status of the process LGWR is “IDLE”, then application of redo logs is up to dateI see that that MRPO at standby is "WAIT_FOR_GAP". How do I resolve this gap.
We have a 11r2 primary and standby running on RHEL 5. The primary lost network connectivity for a time and VMWare locked up. The VM admin restarted the primary VM (it was a hard-boot). This all happened while I was gone and when I came into work, the primary database appeared to be working. I decided to dig deeper and check out the standby. On the standby...
SQL> select * from v$archive_gap;
Thread#: 1
low_sequence: 123120
high_sequence: 123120
[Code]...
It appears all is well (just very far behind) but when I run the last code block (show database prodDB2;) again ...
DGMGRL> show database prodDB2;
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Apply Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Real Time Query: OFF
Instance(s): prodDB
it looks as if the massive backlog is just increasing. How can I confirm that everything that things are going well? I am still learning Data Guard.
My oracle version is 11.2.0.2 RAC RDBMS on RHEL 5.6.
At my standby site my physical standby database is on 4 node cluster with all 4 instances up. I need to disable 3,4 instances so that we want it to run on only 1,2 instances.To disable the instances do i need to stop apply(mrp) process. And the apply node is node 1.
DB1 <Primary> - Production
DB2 <Physial Standby> - DR
I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.
DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;
