We have Oracle 10.2.0.3 database installed on Itanium server.
1. One day we found some packages got invalid & not compiling at all with error – ORA-00600: internal error code, arguments: [4097], [], [], [], [], [], [], [].
2. Then we successfully restored the database from old RMAN backup of previous date that caused this error.
3. After 2 days again we found the same error in alert_prd log - ORA-00600: internal error code, arguments: [ORA-00600: internal error code, arguments: [4097], [], [], [], [], [], [], [] ORA-06512: at "SYS.DBMS_STATS", line 19089 ], [], [], [], [], [], [], []
4. Then for testing we exported database using exp command & found 3 tables are not exporting because of data block corruption issue.
5. Then we truncated the data from all 3 tables and then able to export successfully.
6. After all this we manually run SYS.DMS_STATS job but found same error logged in prd_alert log.
This looks like, still database block corruption issue is there & we are unable to cure it 100% This is a production system & in very critical state now.
How to restore database if rman catalog corrupted and we we dont have bacup of catalog db ..all the backup info are stored in catalog db for prod databases.
We have 11gR2 2 node RAC on Linux. ASM and OMF is used for database. The database on it is backed up using RMAN. We want to test the RMAN backup by restoring it to a new database on same server.
i was worked on oracle 11g.1, oracle data miner 11.1.0.4, sql developer 3.
unfortunately, after finishing my tables and models ,the hard disk damaged and was replaced with other.the oracle setup was not on system partition,it was on D:/ and i had windows backup for C, D partition. i restored oracle partition D which contains old oracle files and i installed oracle again but on partition F.
I'm using Oracle Standard edition 11gR2, actually that's why I'm posting this thread because I can't use TRANSPORT TABLESPACE feature.
I need to restore and recover two tablespaces, backed up in source database in another database. The destination db has been duplicated from the source db a couple of days ago so the structure is identical.
I cannot use Data Pump on this specific tablespace, because it causes some strange behavior in our application. So I took a backup from tablespaces and now I'm looking for a solution to restore and recover it in another db.
Is there any command to restore a tablespace from a specific file? I googled a lot and no luck so far..
P.S: I use controlfile instead of recovery catalog.
I have restored database with the name DB to another database called DB01
it is in STARTED status (not mounted) and it seems I can not change the name if it is not mounts, and I can not mount it because of the name, how to solve this issue if possible? I have RMAN full backup from DB on my current server which hosting the database DB01 the initdb01.ora is ready and configured with DB01
what can I do next
ORA-01103: database name 'DB' in control file is not 'DB01'
I have taken full backup of database plus archivelog. Then copied them to new server..I want the complete procedure to restore the database on new location.
i have the performed level 0 rman backup on 15th feb 2013, and after that i have incremental 1 and archives and controlfile backup. Before this no backup is the database.
Now i want to restore it to 12th feb 2013.so is there any ways to restore the database to that point time.can we restore controlfile to point in time.
I am trying to restore 11gr2 database to point in time. using following steps:
Control files are fine, that are not restored.
RMAN> run { set until time "to_time('2012-12-13 12:12:00','YYYY-MM-DD HH24:MI:SS')"; } RMAN> restore database; RMAN> recover database; RMAN> alter database open;
Here my problem is it is restore complete data what ever i was having, but i don't was it, i has to restore up to specified time only.
We want to keep the Guaranteed restore point for week but unfortunately we don't have enough flash space in the server. Is it possible to backup the flashback log(restore point logs) through rman and send bkp file to tape? how to restore the database in new server until Guaranteed restore point.
we are running oracle 9iR2 ( 9.2.0.1.0) on windows server 2003 R2 and facing ORA-01578: ORACLE data block corrupted (file # 17, block # 312316)
SQL> select * from payrol.slip; select * from payrol.slip * ERROR at line 1: ORA-01578: ORACLE data block corrupted (file # 17, block # 312316) ORA-01110: data file 17: 'E:ORACLEORADATAMTMASYSMTM.ORA' ORA-26040: Data block was loaded using the NOLOGGING option
1) SELECT name FROM v$datafile WHERE file#=17; output E:ORACLEORADATAMTMASYSMTM.ORA
2) SELECT block_size FROM dba_tablespaces WHERE tablespace_name = (SELECT tablespace_name FROM dba_data_files WHERE file_id=17); output 8192
3) SELECT tablespace_name, segment_type, owner, segment_name FROM dba_extents WHERE file_id = &AFN and &BL between block_id AND block_id + blocks - 1;
I have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED****************** configure channel 1 device type disk format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U'; configure channel 2 device type disk format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U'; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U'; CONFIGURE RETENTION POLICY TO REDUNDANCY 7; CONFIGURE CONTROLFILE AUTOBACKUP ON; *******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN************** rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND CONNECT TARGET SYS/ORACLE@ORCL *******************************************************
********INCREMENTAL BACKUP COMMAND********************* RUN { BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE; BACKUP ARCHIVELOG ALL DELETE INPUT; } ********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
The controlfiles were corrupted due to some issue. So, I had to restore the recent backed up control file and then restore the database.
The weird thing which I have noticed is that. I tried backing up Yesterday's Control file. So, I would say that the backup pieces it should pick should be from yesterday. however, the backup pieces are getting restored from last week's backup.
I am using oracle 10g R2. Some how control file is corrupted and database is not open. and there is no backup of control file. Now i need to open the database without recreating the database.
We are cloning a database, but using the restore method ( version 11.1.0.7). The source and destination path are different. As we are using the source controlfile, before restoration SET new name inside the run block is the way to change the path.
I was just wondering, if there is any other way to do it. Because, we have around 1000 datafiles, and dont want write everything in the run block. Also, this goes from Non-ASM to ASM. I tried DB_FILE_NAME_CONVERT, but it seems to be not working.
run { Set newname for datafile 1 to '+DATA_DG1'; Set newname for datafile 2 to '+DATA_DG1'; Set newname for datafile 3 to '+DATA_DG1'; Set newname for datafile 4 to '+DATA_DG1'; restore database; switch datafile all; }
create a backupset, tag it, and restore it. You could say that what I'm trying to achieve is analogous to a flashback, but rather than specifying a timestamp, I'd like to simply restore the entire db to exactly what was there when the tagged backup was taken.Here is the RMAN script I am using for the backup procedure:
run { #allocate channels #ALLOCATE CHANNEL FOR DEVICE TYPE DISK; SHUTDOWN IMMEDIATE; STARTUP MOUNT; #backup database BACKUP FULL DATABASE TAG='latest' PLUS ARCHIVELOG TAG='latest' DELETE INPUT; [code]....
I'd like to take these backups in online mode, and I've tried taking both a consistent and inconsistent backup modifying the above script.Additionally, I'm using the following restore script to try to revert the database to the state when the backup set was taken (and am testing the data being restored by deleting some data entries after taking the backup):
run { #shutdown db (should be done already) SHUTDOWN IMMEDIATE; #mount db STARTUP NOMOUNT; #show RMAN settings SHOW ALL; [code]...
When performing the restore, I dont see the data backed up, rather I see the latest data still in the database. why the state of the db is not getting reverted to the backupset with tag='latest'.Finally, here below I've listed the rman settings for reference:
RMAN> show all; RMAN configuration parameters for database with db_unique_name ### are: CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default [code]...
I am in process of restoring database for a standby.When I am restoring datafiles, it says it is restoring to an original location (same as primary database).
restoring datafile 00242 to +MYDB_DATADG/mydb/datafile/data_05.474.805989155 but when I checked with asmcmd utility, it is actually another path/filename. Only same thing is the diskgroup name.
So the file would be -> +MYDB_DATADG/mydb_stby/datafile/data_05.281.812429111
How do I force rman to restore to the same exact location as my primary database?
i have changed the log_archive_dest_1 to another drive (suppose D ) than Oracle installed disk
created tables in scott , alter system switch logfile;
so archive log was der in the new destination i delete that archivelog from D and pasted to drive E ( cut paste ) start rman , crosschecked archivelogs Now , i want to tell Rman that recover that archivelog from E and then recover
I am trying to duplicate an Database and create an Physical Standby through following command
I took the backup through rman using the following command on Monday
RMAN> run 2> { 3> ALLOCATE CHANNEL C1 TYPE DISK FORMAT 'E:DB_FULL\DB1_FULL_%U'; 4> ALLOCATE CHANNEL C2 TYPE DISK FORMAT 'E:DB_FULL\DB1_FULL_%U'; 5> ALLOCATE CHANNEL C3 TYPE DISK FORMAT 'E:DB_FULL\DB1_FULL_%U'; 6> ALLOCATE CHANNEL C4 TYPE DISK FORMAT 'E:DB_FULL\DB1_FULL_%U'; 7> backup database format 'E:DB_FULL\DB1_FULL_%U'; 8> backup archivelog all format 'E:DB_FULL\DB1_FULL_%U'; 9> backup current controlfile for standby format 'E:DB_FULL\DB1_FULL_%U'; 10> }
Today i am trying to clone the DB1 Database as physical standby ...
using the following command
> RMAN TARGET sys/sys@db1 AUXILIARY /
Then I exceuted the following command
> duplicate target database for standby dorecover;
but i am getting error RMAN-06024: no backup or copy of the control file found to restore
contents of Memory Script: { set until scn 11182084819076; restore standby controlfile; sql clone 'alter database mount standby database'; } executing Memory Script
executing command: SET until clause
Starting restore at 05-NOV-10 using channel ORA_AUX_DISK_1
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 11/05/2010 15:45:30 RMAN-03015: error occurred in stored script Memory Script RMAN-06026: some targets not found - aborting restore RMAN-06024: no backup or copy of the control file found to restore
i even tried to switch the log file of the primary database DB1 but no avail,
I have to test a hot rman backup on testing environment and I have some doubts.
STAGE Server 1 production database (linux) backup folder on cifs share windows server Server 2 testing database (linux)
First I installed linux on same network, I gave it access to cifs backup resource, then I installed the same database version than production environment, then I create a typical database with only same database production name. Also the Linux partitions between linux servers are different.
I want to restore my database from server x to server y.
The control files on server x are named [$ORACLE_SID]_control01.ctl and [$ORACLE_SID]_control02.ctl.
We have an auto backup of the control files.
When I restore the control files on host y, (from autobackup) the restored controle files have other names: control01.ctl and control02.ctl. After the restore and recover (which goes well) the database does not start correctly.
SQL> ORACLE instance started.
Total System Global Area 626327552 bytes Fixed Size 2224088 bytes Variable Size 411041832 bytes Database Buffers 205520896 bytes Redo Buffers 7540736 bytes Database mounted. ORA-01122: database file 1 failed verification check ORA-01110: data file 1: '/data/coda/coda_system01.dbf' ORA-01202: wrong incarnation of this file - wrong creation time
I have on PC running Windows Server 2003 named "Host A" and another Windows Server 2003 named "Host B".I made a Backup from Host A and want to restore this on Host B with following procedure.
Prepare & Backup: SQLPLUS SYS AS SYSDBA SQL>SHUTDOWN IMMEDIATE SQL>STARTUP MOUNT SQL>ALTER DATABASE ARCHIVELOG; SQL>ALTER DATABASE OPEN; SQL>ARCHIVE LOG LIST; SQL>ALTER SYSTEM ARCHIVE LOG START; SQL>QUIT [code]...
But when i now try to access the Database Control i got following Error:„503 Service Unavailable: Servlet error an exception occurred the current application deployment descriptor do not allow for including it in this response" and the restored Datas are not included.
We are managing a huge amount of data warehouse on oracle 11.2.0.3.0. We need to take backup using rman of some tablespace not the whole database backup. we need a backup strategy in which we can restore the backup of some tablespace plus oracle instance if any disaster occur.
I have taken backup using rman on test db of system , sysaux , user tablespace then i restore these tablespace successfully and make the remaining tablespace offline , but while open the database it show me below error.
My question is how i backup using rman so that in case of disaster i restore oracle instance plus specific tablespace not full database.
ERROR at line 1: ORA-01152: file 1 was not restored from a sufficiently old backup ORA-01110: data file 1: 'C:APPADMINISTRATORORADATASYSTEMSYSTEM01.DBF'
