I am running into a strange issue with a restore of an RMAN backup into a duplicate database,.
1). I restored the control file from a recent backup.
2). restored the datafiles ( about 800)
Now when doing a recover, its giving me an error of Future recovery of a datafile marked datafile marked 350.
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
can we restore database from obsolete backup using rman
View 2 Replies View RelatedWe have 11gR2 2 node RAC on Linux. ASM and OMF is used for database. The database on it is backed up using RMAN. We want to test the RMAN backup by restoring it to a new database on same server.
View 5 Replies View RelatedI have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED******************
configure channel 1 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
configure channel 2 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U';
CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
*******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN**************
rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental
rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND
CONNECT TARGET SYS/ORACLE@ORCL
*******************************************************
********INCREMENTAL BACKUP COMMAND*********************
RUN
{
BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE;
BACKUP ARCHIVELOG ALL DELETE INPUT;
}
********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
I want to duplicate a prod database in to a dev db.I am using catalog database to connect to target and auxiliary datbase.I copied all backupsets to the local disk on Dev env in the correct path.For RMAN duplicate ,does the backuppeices need to be present on PROD filesystem as well or just DEV filesystem or both.
View 4 Replies View RelatedOracle 10.2.0.5Linux 5I am creating a duplicate database using RMAN based on Oracle's documentation. I was successful up to running the duplicate command.Here is my command:DUPLICATE TARGET DATABASE vlab pfile='/<complete path of pfile>'; When I run the command, it tries to read from the backup files on production database - which is on anotehr node.Before then, I had backup piece copied to the node with the duplicate database.I ran this command to catalog the backup piece:catalog start with '/<complete path to backuppiece>'Error: no files to be unknown to the database On the other hand, when I run the command without cataloging the backuppiece, I get this error:
Partial view of error- restoring datafile 00021 to /oraappl/pca/vptch/vlabdata/staff101.dbf restoring datafile 00022 to /oraappl/pca/vptch/vlabdata/staff201.dbf restoring datafile 00023 to /oraappl/pca/vptch/vlabdata/tools01.dbf restoring datafile 00024 to /oraappl/pca/vptch/vlabdata/vol01.dbf restoring datafile 00025 to /oraappl/pca/vptch/vlabdata/volsup101.dbf restoring datafile 00026 to /oraappl/pca/vptch/vlabdata/volsup201.dbf channel ORA_AUX_DISK_1: reading from backup piece /oraappl/pca/backups/weekly/vproddat ackupset/2013_08_27/o1_mf_nnndf_TAG20130827T083750_91s7dz0r_.bkp ORA-19870: error reading backup piece /oraappl/pca/backups/weekly/vproddata/rman/VPROD 3_08_27/o1_mf_nnndf_TAG20130827T083750_91s7dz0r_.bkp ORA-19505: failed to identify file "/oraappl/pca/backups/weekly/vproddata/rman/VPROD/b
[code]....
I have a RUN file within a script to duplicate a database. As part of this RUN file I also run the command configure controlfile autobackup off; as part of this RUN file. However, this command has turned off backup of the control file on the AUXILLARY database (i.e. production) as well as the TARGET database (test). Is this supposed to happen?
My run file is:
rman TARGET sys/XXXX@${DB}-SOURCE AUXILIARY /
RUN {
allocate AUXILIARY channel a1 type disk;
allocate AUXILIARY channel a2 type disk;
allocate AUXILIARY channel a3 type disk;
allocate AUXILIARY channel a4 type disk;
[Code]....
We want to keep the Guaranteed restore point for week but unfortunately we don't have enough flash space in the server. Is it possible to backup the flashback log(restore point logs) through rman and send bkp file to tape? how to restore the database in new server until Guaranteed restore point.
View 1 Replies View RelatedIs it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedWe are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View RelatedI am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
I have been updating data in my database by adding numerous rows and assume the insertion of rows started from 1st date of january month.
I have been entering somehow or the other part of data every day.And now the date is 25th of january.
How can i take a partial backup of my database of the transactions done between 15th of January to 20th of January Month
How to take Backup of a particular date say it be 12th of january month.
How to take backup of first 10 days i.e., 1st-10th of january.
i want to clone the test db to dev db but i dont want default users and tablespaces(SYS,SYSAUX,...) in the test db datapump and exp are not working, then contacted ORACLE support and they concluded that test db sysaux was corrupted.i took RMAN all tablespace bkup except default tablespaces. then created new database using DBCA and now i want to restore and recover all those test db tablesapces but while i'm doing restore its saying
RMAN> restore tablespace MAIN_DATA;
Starting restore at 07-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=129 device type=DISK
creating datafile file number=20 name=/opt/oracle/oradata/DEV71/main_data01.dbf
restore not done; all files read only, offline, or already restored
Finished restore at 07-SEP-12
i created all tablespaces in dev same as test db,
create a backupset, tag it, and restore it. You could say that what I'm trying to achieve is analogous to a flashback, but rather than specifying a timestamp, I'd like to simply restore the entire db to exactly what was there when the tagged backup was taken.Here is the RMAN script I am using for the backup procedure:
run {
#allocate channels
#ALLOCATE CHANNEL FOR DEVICE TYPE DISK;
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
#backup database
BACKUP FULL DATABASE TAG='latest' PLUS ARCHIVELOG TAG='latest' DELETE INPUT;
[code]....
I'd like to take these backups in online mode, and I've tried taking both a consistent and inconsistent backup modifying the above script.Additionally, I'm using the following restore script to try to revert the database to the state when the backup set was taken (and am testing the data being restored by deleting some data entries after taking the backup):
run {
#shutdown db (should be done already)
SHUTDOWN IMMEDIATE;
#mount db
STARTUP NOMOUNT;
#show RMAN settings
SHOW ALL;
[code]...
When performing the restore, I dont see the data backed up, rather I see the latest data still in the database. why the state of the db is not getting reverted to the backupset with tag='latest'.Finally, here below I've listed the rman settings for reference:
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ### are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
[code]...
I have to test a hot rman backup on testing environment and I have some doubts.
STAGE
Server 1
production database (linux)
backup folder on cifs share windows server
Server 2
testing database (linux)
First I installed linux on same network, I gave it access to cifs backup resource, then I installed the same database version than production environment, then I create a typical database with only same database production name. Also the Linux partitions between linux servers are different.
What oracle procedure must I apply?
I want to restore my database from server x to server y.
The control files on server x are named [$ORACLE_SID]_control01.ctl and [$ORACLE_SID]_control02.ctl.
We have an auto backup of the control files.
When I restore the control files on host y, (from autobackup) the restored controle files have other names: control01.ctl and control02.ctl. After the restore and recover (which goes well) the database does not start correctly.
SQL> ORACLE instance started.
Total System Global Area 626327552 bytes
Fixed Size 2224088 bytes
Variable Size 411041832 bytes
Database Buffers 205520896 bytes
Redo Buffers 7540736 bytes
Database mounted.
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: '/data/coda/coda_system01.dbf'
ORA-01202: wrong incarnation of this file - wrong creation time
I have on PC running Windows Server 2003 named "Host A" and another Windows Server 2003 named "Host B".I made a Backup from Host A and want to restore this on Host B with following procedure.
Prepare & Backup:
SQLPLUS SYS AS SYSDBA
SQL>SHUTDOWN IMMEDIATE
SQL>STARTUP MOUNT
SQL>ALTER DATABASE ARCHIVELOG;
SQL>ALTER DATABASE OPEN;
SQL>ARCHIVE LOG LIST;
SQL>ALTER SYSTEM ARCHIVE LOG START;
SQL>QUIT
[code]...
But when i now try to access the Database Control i got following Error:„503 Service Unavailable: Servlet error an exception occurred the current application deployment descriptor do not allow for including it in this response" and the restored Datas are not included.
We are managing a huge amount of data warehouse on oracle 11.2.0.3.0. We need to take backup using rman of some tablespace not the whole database backup.
we need a backup strategy in which we can restore the backup of some tablespace plus oracle instance if any disaster occur.
I have taken backup using rman on test db of system , sysaux , user tablespace then i restore these tablespace successfully and make the remaining tablespace offline , but while open the database it show me below error.
My question is how i backup using rman so that in case of disaster i restore oracle instance plus specific tablespace not full database.
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:APPADMINISTRATORORADATASYSTEMSYSTEM01.DBF'
I have taken the backup of a tablespace using the below mentioned command.
run
{
allocate channel c1 device type disk;
backup tablespace tcs_tbs;
}
Now I after even after one month or one year I want to restore the backup on my same database to bring the tablespace to the previous position.
Is it possible to restore even after one year, Is retention period gonna play its role in this?
Is it possible to recover files from backup tapes which are gone obsolete (as per retention policy)?
View 4 Replies View RelatedI have no backup taken in my oracle server.Today morning i created a data file and unknowingly deleted it. Now i need to restore the datafile with its contents without using RMAN.
View 14 Replies View RelatedOracle 10gR2 (base)
Dataguard, no RAC
no ASM
Performing backups on the physical standby via RMAN. We need to restore our test database, and right now it is equivalent to the production. The DUPLICATE command seemed the best bet. We have controlfile and SPFile both on Auto-backup, and the RMAN on a six day retention with weekly 0 level backups and nightly level 1 cumulative backups.
However, when I run the DUPLICATE it chokes being unable to find a current controlfile nor one in backup, even though we have six days worth of supposedly good (validated) backups. We are not using a catalog, rather the DB controlfile.
The solution to this error is reopen the database and try again. however, the physical standby cannot be opened. It is the standby. What if we move the last backup to the primary database, "register" it there, and try this DUPLICATE?
I have seen nothing on this in my searches, and the Oracle documentation does not address this, though it recommends backup from the Physical Standby.
RMAN-05513 is the error code.
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
I am trying to restore a backup from a live server to a dev server. Have moved nackup sets. Created a windows service to match the old sid on live system. copied the pfile from live and changed the locations of the folders to suit dev. set oracle_sid to the new sid(as created to match live)
connected to rman
startup nomount
set dbid to the live number
restore controlfile
alter database mount
catalog'd all the backupsets
[code]....
but it fails when it tries the restore .. see below ..The path it is showing is the old path from the live server, so it appears to eb ignoring my set newname statements even though they succeeded earlier - should be restoring them to d:oracleoradatasun43dev ? Does the whole thing have to be put inside one run block or can I put bits in one run block and other bits outside of it etc?
RMAN> restore database;
Starting restore at 14-FEB-12
using channel ORA_DISK_1
using channel ORA_DISK_2
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
[code]....
1) have taken backup at target side.
2) through SCP, transferred all the file to auxiliary side.
3) Ran the duplicate command at auxiliary side.
After running the command, i got the below error.
hish@localhost db_1]$ rman target sys/oracle@suman auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Apr 12 09:13:43 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: SUMAN (DBID=3778352561)
connected to auxiliary database: ASHISH (not mounted)
[code]......
I started restoring and testing all the backups. So far I did good and I wanted to restore and test in different host. I couldn't find any online documentation regarding restore full back up in a new different server (With same OS and same version of Oracle) without RMAN catalog database.
View 4 Replies View RelatedI have installed oracle 11.2 on virtual machine and made two copy of this vm i.e vm1 and vm2...i have taken fullbackup with rman on vm1 and autobackup of control file.Now i want to restore this backup on vm2, for this i have configured channel and other setting. run following command
catalog start with '\server3database_backup
manC-3507808503-20130531-00';
"C-3507808503-20130531-00" is the name of control file autobackup.
RESTORE CONTROLFILE ;
it gives me error RMAN-06496: must use the TO clause when the database is mounted or open...then i use following command
RESTORE CONTROLFILE to 'C:oracleAdministratororadataslate';
then it gives me error RMAN-06024: no backup or copy of the control file found to restore...how to restore control file to vm2
I want to remove matching dbid's from the rman catalog without compromising te integrity of the catalog. I do however know a single way of removing them and its using the dbid and db_key which in my case are not not unique. The funny thing is they've running normally for a year now.
NAME DBID RESETLOGS_TIME
-------- ---------------------- -------------------------
RMANDB 3354934991 18-AUG-05
KFXPR 3575520995 09-DEC-10
KFXITM 13634474 20-SEP-05
[code]....