I have no backup taken in my oracle server.Today morning i created a data file and unknowingly deleted it. Now i need to restore the datafile with its contents without using RMAN.
View 14 RepliesI have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
I have a doubt regarding the process the RMAN follows for restore and recovery of the database.
My Level 0 full backup completes on Saturdays at around 11 am after taking 8 hours (It starts at 3am).On Sunday, I ask RMAN to restore (on a different box) till Saturday 11:30 am.Then, after the restore is successful, I recover it till 11:45 am.
The recovery also goes fine and Iam able to clone to test box.
Till what time is the database restored? I assume its till 11 am since the L0 backup finishes at 11 am though I have asked it to restore till 11:30 am
During the recovery, ONLY the archives generated between Saturday 3 am and till the time i asked for recovery (Saturday 11:45 am ) are required. But, checking the recovery log file, i was surprised to see that RMAN has restored archive files starting from Friday 9:30 pm (Much before the time the Level 0 backup even started).
why does RMAN require the old archive log files.
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedWe are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View RelatedI am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
can we restore database from obsolete backup using rman
View 2 Replies View RelatedI have been updating data in my database by adding numerous rows and assume the insertion of rows started from 1st date of january month.
I have been entering somehow or the other part of data every day.And now the date is 25th of january.
How can i take a partial backup of my database of the transactions done between 15th of January to 20th of January Month
How to take Backup of a particular date say it be 12th of january month.
How to take backup of first 10 days i.e., 1st-10th of january.
1. My RAC (old RAC) had got a failures from one node, then there was only one existing node now.
2. I configured a RAC (new RAC) on 2 other servers, both of them (old-RAC and new-RAC) has got same OS version, platform and Oracle version release.
3. I took a full backup yesterday plus archivelog in the node of old-Rac, configure NFS in new-Rac to make the backup within remote-share NFS.
The only problem still now that I've restore/recovery/duplicated single instance, not Rac. So, may you guide me to do it?
Information:
Old-Rac & New-Rac:
+ Cluster 11g: CFS
+ Database: 2 nodes with same instance name (cbs1-cbs2)
+ Location for CRS_HOME and ORACLE_HOME: Same to be.
+ Location of archivelog: Same to be (+ARCHIVE)
I have to test a hot rman backup on testing environment and I have some doubts.
STAGE
Server 1
production database (linux)
backup folder on cifs share windows server
Server 2
testing database (linux)
First I installed linux on same network, I gave it access to cifs backup resource, then I installed the same database version than production environment, then I create a typical database with only same database production name. Also the Linux partitions between linux servers are different.
What oracle procedure must I apply?
i want to clone the test db to dev db but i dont want default users and tablespaces(SYS,SYSAUX,...) in the test db datapump and exp are not working, then contacted ORACLE support and they concluded that test db sysaux was corrupted.i took RMAN all tablespace bkup except default tablespaces. then created new database using DBCA and now i want to restore and recover all those test db tablesapces but while i'm doing restore its saying
RMAN> restore tablespace MAIN_DATA;
Starting restore at 07-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=129 device type=DISK
creating datafile file number=20 name=/opt/oracle/oradata/DEV71/main_data01.dbf
restore not done; all files read only, offline, or already restored
Finished restore at 07-SEP-12
i created all tablespaces in dev same as test db,
I want to restore my database from server x to server y.
The control files on server x are named [$ORACLE_SID]_control01.ctl and [$ORACLE_SID]_control02.ctl.
We have an auto backup of the control files.
When I restore the control files on host y, (from autobackup) the restored controle files have other names: control01.ctl and control02.ctl. After the restore and recover (which goes well) the database does not start correctly.
SQL> ORACLE instance started.
Total System Global Area 626327552 bytes
Fixed Size 2224088 bytes
Variable Size 411041832 bytes
Database Buffers 205520896 bytes
Redo Buffers 7540736 bytes
Database mounted.
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: '/data/coda/coda_system01.dbf'
ORA-01202: wrong incarnation of this file - wrong creation time
I have on PC running Windows Server 2003 named "Host A" and another Windows Server 2003 named "Host B".I made a Backup from Host A and want to restore this on Host B with following procedure.
Prepare & Backup:
SQLPLUS SYS AS SYSDBA
SQL>SHUTDOWN IMMEDIATE
SQL>STARTUP MOUNT
SQL>ALTER DATABASE ARCHIVELOG;
SQL>ALTER DATABASE OPEN;
SQL>ARCHIVE LOG LIST;
SQL>ALTER SYSTEM ARCHIVE LOG START;
SQL>QUIT
[code]...
But when i now try to access the Database Control i got following Error:„503 Service Unavailable: Servlet error an exception occurred the current application deployment descriptor do not allow for including it in this response" and the restored Datas are not included.
I have taken the backup of a tablespace using the below mentioned command.
run
{
allocate channel c1 device type disk;
backup tablespace tcs_tbs;
}
Now I after even after one month or one year I want to restore the backup on my same database to bring the tablespace to the previous position.
Is it possible to restore even after one year, Is retention period gonna play its role in this?
Is it possible to recover files from backup tapes which are gone obsolete (as per retention policy)?
View 4 Replies View Related7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
I am trying to restore a backup from a live server to a dev server. Have moved nackup sets. Created a windows service to match the old sid on live system. copied the pfile from live and changed the locations of the folders to suit dev. set oracle_sid to the new sid(as created to match live)
connected to rman
startup nomount
set dbid to the live number
restore controlfile
alter database mount
catalog'd all the backupsets
[code]....
but it fails when it tries the restore .. see below ..The path it is showing is the old path from the live server, so it appears to eb ignoring my set newname statements even though they succeeded earlier - should be restoring them to d:oracleoradatasun43dev ? Does the whole thing have to be put inside one run block or can I put bits in one run block and other bits outside of it etc?
RMAN> restore database;
Starting restore at 14-FEB-12
using channel ORA_DISK_1
using channel ORA_DISK_2
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
[code]....
I have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED******************
configure channel 1 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
configure channel 2 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U';
CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
*******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN**************
rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental
rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND
CONNECT TARGET SYS/ORACLE@ORCL
*******************************************************
********INCREMENTAL BACKUP COMMAND*********************
RUN
{
BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE;
BACKUP ARCHIVELOG ALL DELETE INPUT;
}
********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
We want to keep the Guaranteed restore point for week but unfortunately we don't have enough flash space in the server. Is it possible to backup the flashback log(restore point logs) through rman and send bkp file to tape? how to restore the database in new server until Guaranteed restore point.
View 1 Replies View Related1) I have created One tablespace "ABCD" and assigned one user on it "ABCD_AR". I made table through the user and made some transaction.
2) Then I have taken RMAN backup, which include backup of tablespace (ABCD) also.
List of Datafiles in backup set 10
File LV Type Ckp SCN Ckp Time Name
---- -- ---- ---------- --------- ----
1 Full 997754 17-JUN-13 C:APPADMINISTRATORORADATATESTSYSTEM01.DBF
2 Full 997754 17-JUN-13 C:APPADMINISTRATORORADATATESTSYSAUX01.DBF
3 Full 997754 17-JUN-13 C:APPADMINISTRATORORADATATESTUNDOTBS01.DBF
4 Full 997754 17-JUN-13 C:APPADMINISTRATORORADATATESTUSERS01.DBF
5 Full 997754 17-JUN-13 C:DATAFABCD01.DBF
3) After taking Rman backup, I issued command - "Drop tablespace ABCD including contents and datafiles;"
4) When i issue "LIst backup" through RMAN, its shows blank for the particular tablespace datafile.
SQL> DROP TABLESPACE ABCD INCLUDING CONTENTS AND DATAFILES;
Tablespace dropped.
SQL> shut immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup;
ORACLE instance started.
[code]....
how to recover those tablespace's datafile?What happened to earlier tablesapce backup?
How i can manually allocate channel for my backups going to tape?
For disk backups i can do and it work...
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'J:dbname\%U';
restore database preview;
}
how i can change backup datafile name into its original file name,bcoz at time backup datafile name is different and how i can change that name into its original datafile name so i apply recovery command in user managaed recovery..
View 7 Replies View RelatedHow i can take manually backup of datafile..using OS command
View 1 Replies View RelatedSuppose our database have 100 datafiles and right now rman has completed backup of 64 datafile(from file no 1 to file no 64) and in process of backup of 65 number datafile. In mean time I executed some query and it has changed the file no 55. so now my question whether rman will go and bacup this datafile(datafile no 55) again or it will leave this file as it is?
View 4 Replies View RelatedI have one database which is fully restored from client backup (RMAN). Database was up and running perfectly. By mistake I have deleted one schema/user and its tablespace using drop command. I have RMAN backup so want to restore that schema's datafile from the backup but when I run below statement it throwing error :
run {
allocate channel c1 device type disk ;
set newname for datafile 45 to '/ora/oradata/JSIP1/data.dbf';
RESTORE datafile 45;
switch datafile 45;
recover datafile 45;
SQL ' alter database datafile 45 online ' ;
}
RMAN-20201: datafile 45 not found in recovery catalog
or If I go and try to restore the tablespace of that schemas using below block it throws error:
run {
allocate channel c1 device type disk ;
RESTORE TABLESPACE DATA;
RECOVER TABLESPACE DATA;
SQL 'ALTER TABLESPACE DATA ONLINE';
}
RMAN - 20202 Tablespace not found in the recovery catalog
RMAN -06019 could not transalate tablespace name "DATA"
how to restored drop users and tablespace data from the RMAN backup.
I am having a issue, we are trying to restore our db from control files using Symantec Backup exec, but job fails giving me error go to table spaces select all table spaces and unchecked roll forward.
i am unable to find way to uncheck the table spaces. Here is the complete description.
Cause
The system catalog tablespace "syscatspace" contains all of the system catalog information for the tables. Syscatspace needs to be rolled forward first, and then the other tablespaces must be rolled forward.
Solution
Workaround:
When the restore operation is run from a tablespace level backup, perform the rollforward for the syscatspace tablespace first and then for other tablespaces.
Execute the rollforward operation as a DBA operation. The sequence of the recovery process should be as follows:
1. Select all tablespaces, uncheck the rollforward option and run the restore job.
2. Run the rollforward operation as a DBA initiated operation:
rollforward syscatspace to point in time / end of logs. e.g. db2 => rollforward database UEXIT to end of logs and complete Tablespace (SYSCATSPACE) online
3. Perform rollforward of all other tablespaces.
e.g. db2 => rollforward database UEXIT to end of logs and complete tablespace (SYSTOO LSPACE,USERSPACE1) online
Refer to IBM DB2 documentation for more information on DBA-initiated operations.
How can i take a cancel based recovery and time based recovery using rman. ?
View 3 Replies View Related