I started restoring and testing all the backups. So far I did good and I wanted to restore and test in different host. I couldn't find any online documentation regarding restore full back up in a new different server (With same OS and same version of Oracle) without RMAN catalog database.
View 4 Replies
I configured recovery catalog and started Full online backup using EMC Networker. In EMC Networker I set three months policy to keep Backup.I didn't change redundancy.
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
My question is, if I need to restore Backup of last 15 days then I can ?.
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
We have production database and standby database in 11g.
Production db server is taking care by different team even I don't have any access of the production server and I am responsible only for standby server. As of now everything is working fine except database backup on standby server because standby server is not register in catalog.
How to register standby server in catalog for RMAN backup?
I need to restore entire database(sp+control+datafile) to new host.I have started the instance with nomount( and it has created a dummy parameter file).Now, I need to fire the command to restore spfile.
RUN
{
ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='...';
RESTORE SPFILE TO PFILE '?/oradata/test/inittrgta.ora' FROM AUTOBACKUP;
SHUTDOWN ABORT;
}
My questions:-
1.How will RMAN find the location of backupset(Since there is controlfile for neither target or catalog database)?
2.How does RMAN reache the backupset in case of a)tape b)disk?
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
How to restore database if rman catalog corrupted and we we dont have bacup of catalog db ..all the backup info are stored in catalog db for prod databases.
View 7 Replies View RelatedI am trying to restore a backup from a live server to a dev server. Have moved nackup sets. Created a windows service to match the old sid on live system. copied the pfile from live and changed the locations of the folders to suit dev. set oracle_sid to the new sid(as created to match live)
connected to rman
startup nomount
set dbid to the live number
restore controlfile
alter database mount
catalog'd all the backupsets
[code]....
but it fails when it tries the restore .. see below ..The path it is showing is the old path from the live server, so it appears to eb ignoring my set newname statements even though they succeeded earlier - should be restoring them to d:oracleoradatasun43dev ? Does the whole thing have to be put inside one run block or can I put bits in one run block and other bits outside of it etc?
RMAN> restore database;
Starting restore at 14-FEB-12
using channel ORA_DISK_1
using channel ORA_DISK_2
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
[code]....
my restore scenario bellow.
I have hot full backup that processed by NetBackup Policy. the backup policy are;
1.Full backup database in Monday. Daily_Monday_RMAN <- 1 volume pool=1 media
2.Full backup database in Tuesday .Daily_Tuesday_RMAN <- 1 volume pool=1 media
3.Full backup database in Wednesday. Daily_Wednesday_RMAN <- 1 volume pool=1 media
4.Full backup database in Thursday. Daily_Thursday_RMAN <- 1 volume pool=1 media
5.Full backup database in Friday. Daily_Friday_RMAN <- 1 volume pool=1 media
6.Full backup database in Saturday. Daily_Saturday_RMAN <- 1 volume pool=1 media
How to restore database from one of medias?
How can be identify a particular archive-log file have backup or not from rman catalog?
View 2 Replies View RelatedI have two Solaris 5.11 x86 64 bit servers. I need to be able to copy the backup files to a temp location on the 2nd server and restore that server so it is a test version of the first server. There is no RMAN catalog, I simply want to backup on A move to B restore from files copied to b.
On the first server installed Oracle Enterprise 11.2.0.3. sid = orcl. i created one schema with a new table space added a table and inserted 500,000 rows.
i set the db to archivelog=on, set configure controlfile autobackup on
i then did RMAN backup as backupset database spfile;
on the second server, i installed Oracle Enterprise 11.2.03, sid=orcl exactly like i did on the first server.i scp'd all of the files created by the backup to one location on the test server. i renamed spfileorcl.ora in dbs to somethinge else. startup nomount, exit and go to rman and run this:
DUPLICATE DATABASE TO 'orcl' SPFILE BACKUP LOCATION '/tmp/backups' NOFILENAMECHECK;
this runs for a while and looks like it works but eventually fails with :
RMAN-05541: no archived logs found in target database
subsequent attempts to 'startup' the database receive the error ORA-19838: Cannot use this control file to open database.
This is very frustrating. I have gone over all of the manuals, documentation and more but there is no 'step by step' process that i can find that is current with my version of Oracle that documents the steps necessary to simply backup a db, move it to a test server to a disk and then restore that test server as a copy of the first server.
on 10g R2 on AIX. today (30th of Nov at 7PM) I want to restore my DB from a full backup done on 21 of Nov at 9AM.
Should I :
RMAN> Run {
2> shutdown immediate;
3> startup nomount;
4> SET UNTIL TIME "TRUNC(SYSDATE) - 8";Is my "SET UNTIL TIME "TRUNC(SYSDATE) - 8" accurate ?
Or other value for SET UNTIL TIME ???
We want to keep the Guaranteed restore point for week but unfortunately we don't have enough flash space in the server. Is it possible to backup the flashback log(restore point logs) through rman and send bkp file to tape? how to restore the database in new server until Guaranteed restore point.
View 1 Replies View RelatedI created a catalog for rman backup. To launch a backup with the catalog I executed the following command:
1) rman catalog user/password@catalog
2) connect target /
3) backup archivelog all
New to oracle FAQ. I'm interested in oracle, waiting to explore more Technic's in 10g with a proper guidance. Hope i'm in the right place.Here is my question.
I need steps for configuring rman cloning with catalog & without catalog.were in prod db the source is in /u01 & in auxiliary db the client want in /u05. how to do it. here i have recreate control file or not
have the below issue
starting full resync of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of allocate command at 02/18/2013 05:00:06
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 02/18/2013
05:00:06
ORA-02291: integrity constraint (REPOSDB.ORL_F1) violated - parent key not
found
REPOSDB is the catalog database .
we have a cluster of two nodes having oracle 11G R2 and another single instance server where RMAN is configured and this is backup server.i have created the service between the the target database and backup server and they are working fine i.e tnsping work fine at both sites.Now i have physical backup scripts written at one of cluster node and scripts run at crontab. The backup include full_backup , archive backup etc.
Now all physical backups work fine that is connecting RMAN and then catalog and then complete the backup but the full_backup do not connect catalog and throw this error that it do not know the SID in the connect descriptor. the tnsping output (from target ) is as followed fedb112 # tnsping bkp
TNS Ping Utility for Solaris: Version 11.2.0.1.0 - Production on 24-JAN-2012 14:11:45
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
[code]...
in above scripts " connect catalog rcowner/rcowner@bkp " do not connect while i have other two scripts for incremental backup and archival backup, have the same code but they connect successfully and this one do not
now i run lsnrctl status at backup server , as follows
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 24-JAN-2012 13:49:44
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.x.x.x)(PORT=1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
[code]...
why it do not connect to RMAN catalog and use control file instead for backup
We are having 2 DB's on separate servers but both the DB is having same DBID and NAME. Also both the backup is planned to execute from one rman catalog DB.
Will the catalog DB confuse, when we execute backup for both the DB at same.
Database version : 11.1.0.7
Applications R12 (12.1.3)
Operating system : Redhat linux 5.5
I would like to know how to create recovery catalog database to acheive rman backups as control file will not keep backup info longer. This is for our production database what are the requirements before doing so and what happens to configure retension policy to recovery window.
Initially plan of taking backup to disk and later moving backups to tape device
I created catalog and registered with database.My question is do i always need to connect to catalog after connecting to rman.
View 11 Replies View RelatedI am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
Does the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
I am trying to practice some RMAN configuration settings.Version 11.2.0.1OS - Linux X86-64 What i wanted to validate is if there is no level 0 backup of database taken, then the level 1 backup will be automatically backing up all the blocks of the database(similar to full backup). RMAN> report schema; Report of database schema for database with db_unique_name DB101 List of Permanent Datafiles
File Size(MB) Tablespace RB segs Datafile Name----1 300 SYSTEM +DATA/db101/datafile/system.257.8208254172 200 SYSAUX *** +DATA/ db101/ datafile/sysaux.268.8208254253 820 UNDOTBS1 *** +DATA/db101/datafile/undotbs1.261.8208254294 5000 TPCCTAB *** +DATA/ db101/ datafile/tpcctab.266.820832485 List of Temporary Files=File Size(MB) Tablespace Maxsize(MB) Tempfile Name---- 1 200..
[code]....
I am not sure what these input bytes are which is not matching with the database size(posted in the beginning of thread)? why it has to show as db full when i actually run a incremental?
I want to remove matching dbid's from the rman catalog without compromising te integrity of the catalog. I do however know a single way of removing them and its using the dbid and db_key which in my case are not not unique. The funny thing is they've running normally for a year now.
NAME DBID RESETLOGS_TIME
-------- ---------------------- -------------------------
RMANDB 3354934991 18-AUG-05
KFXPR 3575520995 09-DEC-10
KFXITM 13634474 20-SEP-05
[code]....
What is the good practice to maintain RMAN catalog ?
RMAN backup and recovery is fine but to delete old backups it takes a lot of time.
Even if I delete backups manually,RMAN takes a lot of time to delete expired backup command.
What can be done to increase the speed of delete obsolete backup and delete expired backup operations ?
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedWe have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View Relatedcan we restore database from obsolete backup using rman
View 2 Replies View Related
