I get below error when i tried to add the master site to the master definition site.
SQL> BEGIN
2 DBMS_REPCAT.ADD_MASTER_DATABASE(
3 gname => 'TEST',
4 master=> 'testdb2',
5 use_existing_objects => FALSE,
6 copy_rows => FALSE,
[code].......
I want to remove the master site which is in the multi master replication environment.
I have a doubt here. When I try to suspend the master activity,I need to give the gname.
BEGIN
DBMS_REPCAT.SUSPEND_MASTER_ACTIVITY (
gname => 'NAGADMIN');
END;
/
Where gname=master group name.But I have 9 master groups in my database. If i give one of the gname present in the master site will suspend the replication of the entire database from the replication.
eg; i am only giving NAGADMIN gname in the suspend activity script.. I have other gnames like, NAGUSER,NAGAUTH, etc....
m trying to create replications of data from the M.V. site. to master site
/* AT MASTER SITE */
1. MASTER REPLICATE GROUP
2. MASTER REPLICATE OBJECT
3. REPLICATION SUPPORT
4. REPLICATION ACTIVITY
5. M.V. LOG
/* AT M.V. SITE */
1. MATERIALIZED VIEW (M.V)
2. DBMS_REFRESH.MAKE (REFRESH GROUP)
AND I AM NOT ABLE TO CREATE
1. CREATE_MVIEW_REPGROUP
2. CREATE_MVIEW_REPOBJECT
IN M.V. SITE , and i am getting following error while creating REPGROUP
CODE
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPGROUP (
3 gname => 'emp_repg',
4 master => 'orc1',
[code]..
while replicating the master site via materialized views, in mViewGroups i issued:
BEGIN
DBMS_REFRESH.MAKE (
name => 'mvadmin.hamza_refg',
list => '',
next_date => SYSDATE,
interval => 'SYSDATE + 1/1440', -- for test purpose i used such a small interval
implicit_destroy => FALSE,
rollback_seg => '',
push_deferred_rpc => TRUE,
refresh_after_errors => FALSE);
END;
in my previous attempt it worked all fine... i had a change in senerio, so i did my replication again from scractch using the same old spool in a new installation but even after 3 tries on replicating from scratch my objects are not getting refreshed automatically. even when i attempt to refresh the group it does not work. it works only when i refresh each of the participating object of the group manually.
I have a multimaster replication between 2 sites (BASE1 and BASE3). BASE1 is the master definition site. I want to add a new master site without acquiescing the master group (named GM_ADMINISTRATEUR).
First, I have used the script provided by Oracle :
DBMS_REPCAT.SPECIFY_NEW_MASTER (
gname => 'GM_ADMINISTRATEUR',
master_list => 'BASE2.WORLD' );
and
DBMS_REPCAT.ADD_NEW_MASTERS( ....);
The first time, I had Errors, so I use the command
DBMS_REPCAT.UNDO_ADD_NEW_MASTERS_REQUEST
and I drop the master site BASE2 (connected as repadmin to BASE2 site).
The master site BASE2 is not present at BASE1 master definition site, The master repgroup is not present at BASE2 BUT, the master site BASE2 is always present at BASE3 master site. I think that the command UNDO_ADD_NEW_MASTERS_REQUEST undo the changes on BASE1 (the master definition site) but don't undo the changes on the site BASE3.
And now, when I want redo the add_new_masters, the command
DBMS_REPCAT.ADD_NEW_MASTER
return a error on the command ADD_NEW_MASTER in the DBA_REPCATALOG for the following reason:
ORA-00001: violation de contrainte unique (SYSTEM.REPCAT$_REPSCHEMA_PRIMARY)
ORA-06512: � "SYS.DBMS_REPCAT_UTL", ligne 4484
ORA-06512: � "SYS.DBMS_REPCAT_RPC", ligne 1758
And I can't continue because the new master site BASE2 does not appear at BASE1 master definition site. I think I have to drop the master site BASE2 at the master site BASE3, but I dont know how to do this.
**** Following information at BASE1 (master definition site : *****
prompt Replication schemas/ sites
Replication schemas/ sites
select
sname,
masterdef,
[code].....
what are the recommended network requirements for implementing Oracle Multi Master replication.
View 1 Replies View RelatedI want to upgrade all the Oracle 10g Release (10.2.0)master sites (bi-directional) databases to Oracle 11g Release (latest). In fact, we are using bi-directional oracle streams and snapshot replication, it means capture,propagate and apply process is running.
View 1 Replies View RelatedI have 3 sites which want to be updated as soon as the other one updates its data.(in 5 seconds). So I have chosen multi master solution,sync regardless of the resource consideration.
1-what is the difference between multimaster async and updatable materialized view regardless of resource consuming in multimaster?because in both of them each site can receive and also propagate the data...I just know that in materialized view we can work offline and then apply it manually is there any other thing?
2-I can not understand the difference between multimaster sync and async (considering the 5 seconds,because 5 second is a little time)I mean in this case are they different from each other or not.
I Have configured the replication between two database's at table level. After few miniuts of successful configuration of replication between two db's at table level, I am getting the ORA-00001: unique constraint (%s_PK) violated error in dba_apply_error.
I checked constraint name,type and status on table replicated is same on both source and destination db.
Is it possible to perform any operation using oracle like addition and division in csv file before loading data in oracle. and after the operation changes must save.
Is it possible or not.
i am populating 3 records in my data block.i do not want more than 3 rows.but when i click the plus icon in form menu one more row is getting generated which i do not want. i can restrict the new record addition through plus icon in menu bar for a particular block.
View 1 Replies View Relatedora-00000 normal successful completion error while populating data from Master block to Detail block in Oracle Forms 11g.
View 6 Replies View RelatedDuring the MV refresh we are getting the following error and not able to fix it .
SQL> EXECUTE DBMS_MVIEW.REFRESH('EMP','F');
BEGIN DBMS_MVIEW.REFRESH('EMP','F'); END;
*
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-01400: cannot insert NULL into ("XYZ"."EMP"."DESCRIPTION")
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2251
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2457
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2426
ORA-06512: at line 1
The above column:- Emp.Description is a 'CLOB NOT NULL' .
We have created the MV using the below script
create materialized view EMP refresh on demand for update as select *from ABC.EMP@DBLINK;
We are facing serious problem while refreshing materialized views using fast refresh option in ORACLE..For the very first time we are performing Complete refresh of data from DB1 to DB2 for few tables.Ongoing we are performing Fast Refresh.Sometimes the fast refresh works fine without any error and sometimes it fails with the below error.
ERROR at line 1:
ORA-32320: REFRESH FAST of "CIR"."C_BO_COMM" unsupported after
cointainer table
PMOPs
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 841
ORA-06512: at line 1
let me know when will this error occur during Fast Refresh.
I have a sql to pull all payments from vendors for a specific time period; however, now tasked to only show the Address of each Tax Reporting Site. I have tried several commands but have not been successful.
View 7 Replies View RelatedSo usually joining a local table and a remote table (much larger table), the best practice is using a /*+ DRIVING_SITE(remote table) */ hint.
*CASE1:
INSERT INTO another_local_table
SELECT /*+ DRIVING_SITE(remote_table) */
FROM local_table
,remote_table@remotedb
WHERE join condition
*CASE2:
However I saw this particular
FOR x IN Select id From local_table l
LOOP
INSERT INTO another_local_table
[code]...
So far I haven't seen the explain plan of both cases since most of the tables are Global temporary tables. But in terms of the logic of the two cases and the common best practice, logically doesn't CASE1 should have a better performance?
For me, its like taking a trip to a grocery. CASE1 buys all that you need, one time, it will take you a half-day trip perhaps. However CASE2 is like quickly buying a grocery item, one at a time, for several short trips. You'll save on gas on CASE1 right.
I have installed SQL navigator 5.0 version in my PC. Once it has been successfully installed, I clicked on SQL navigator icon in my PC after that it's prompted me for asking authorization Key. I have entered the following key.
3-37993-18701-28024-78347
Once I have entered the key is is prompting me for asking site message. what message I should enter.
Actually am trying to replicate two db servers from one in hong kong and another in china. when am trying to establish the replication, am getting error 'ORA-04052: error occurred when looking up remote object' like this...
but the same way i have tried in my local network, it is working fine.i have tried schema replication through enterprise manager grid control..
I have a strange problem of connecting Oracle Forms6i from our Remote site.actually we change our IP address of lease line, we connect to it.but when we connect locally,forms are running without any problem,but when we connect globally or from other sites it can't able to connect,even sql prompt and toad also connect from remote site,but when we try to connect forms(forms runtime) it gives error message(ORA-12203: TNS:unable to connect to destination).when we connect this application from local application(Forms) it can connect well but from globally it can't able to connect.
View 1 Replies View RelatedOracle 10gR2 on red hat.
I have an application that writes blobs via pro*c. It is running at several sites without errors for a few years now. One of the newer sites has started reporting "ora-01578 ORACLE data block corrupted".
I've tried using rman backup validate - it does not report any errors.
I've tried using rman restore and recover to correct the problem.
I've tried deleting the file with the corrupt block and using rman restore and recover to recreate it.
In any of the above cases, I do not see any errors being encountered, and when I restart the application, it works for a while and then starts reporting "ora-01578 ORACLE data block corrupted".
I've had the client do a physical check of the disk and it indicated the media was okay.
We've failed over to the standby system, so I have a wee bit of breathing room - but I'm going to be away for 4 days and will have to get back on this when I get back. I'm a little puzzled that I can fix it for a short while and then it breaks again.
Do we have any plan to create DR ( disaster site) for ORACLE 10G standard version. Since, Data Guard is not available with Standard version, can we have any another plan for the same.
View 5 Replies View Relatedi want to create tab menu like in sumneva site URL.....
View 13 Replies View Related1.What are the basic things we need to analyze before we recommend the business to go for oracle Dataguard for DR setup?
2. Do you know any technology that will replicate the schema from one datacenter[one primary database ] to another datacenter [secondary or replication database]?
3. What are the various option to configure the disaster recovery plan at schema level?
i need to set up a central server with all the master tables and two other local database which will hold the updatable materialized view of the master table...the databases must be synchronized with central server..and user will work on the materialized view database...
View 10 Replies View RelatedI am new to Oracle and a beginner in Data Guard.
1) How to find archive log gap from Primary Database site?
2) Do I need the DB_UNIQUE_NAME when setting the LOG_ARCHIVE_DEST_2 ? What is the purpose of DB_UNIQUE_NAME in LOG_ARCHIVE_DEST parameter?
3) If archivelog gap happens standby db goes out of sync with the primary database. What does out of sync actually mean?
4) Primary DB knows where to transport redo data based on the location mentioned in LOG_ARCHIVE_DEST_n of Primary DB. Am I correct in my understanding?
I want to set up advance replication for 3 master site (multimaster) I created 3 master site named orc1,orc2,orc3 and followed up oracle replication management of API book instruction I created 2 tables(tes1,test2) in hr schema in all 3 master site with the same data. then I created the following steps
1-CONNECT repadmin/repadmin@orc1
2-Create the master group named hr_test_repg
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => 'hr_test_repg');
END;
/
4-add tables test1 and test2 to the group
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
gname => 'hr_test_repg',
type => 'TABLE',
oname => 'test1',
[code]....
I could create DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT for test2 but not for test1 and it produces error
RROR at line 1:
RA-23309: object hr.test1 of type TABLE exists
RA-06512: at "SYS.DBMS_SYS_ERROR", line 105
RA-06512: at "SYS.DBMS_REPCAT_MAS", line 2552
RA-06512: at "SYS.DBMS_REPCAT", line 562
RA-06512: at line 2
We have an Oracle application 12.1.1 running with oracle database 10.2.0.4 and we're using HP-UX itanium 11i v3 servers for both application and database, our requirement is to establish a Disaster Recovery site out of our building to ensure data protection.
What is the best option we can use to reduce the cost and to implement the DR site? can we use data guard ? and will be the configurations and requirements for it?
I have one 10g database in other country. I want part of their db (selected tables or tablespaces) and import that data to my 10g DB and i want keep to date this data.
I know two ways
1. Data Pump Imp/Emp via FTP, but i can't send only data that have changed (incremental), i must pumping whole selected part of database (i want only new data from their DB, but consistanse with my DB)
2. RMAN etc. or other archivisation tool, i can do incremental achivisation, but can i send files to another instances (my db) and load only that data? Can i do that with SQL*Loader?
For using replication in our production, here i am testing golden gate as replication tool. I tested all scenario in Uni direction ( source to destination). Now have to test replication with DDL support in Bi-Direction. Not getting any Doc for doing replication in Bi-direction( Two Way). If any one has done the same, then please share limitation of replication in Bi-direction through Golden Gate.
View 7 Replies View RelatedI have 8 databases in a multi master replication. I want to refresh the tables in the replication.
View 3 Replies View Related
