I have oracle 8i installed on a Windows XP with SP2 PC. Everytime i start the pc the database is not getting started automatically however i need to start it manually using the svrmgrl command. How to autostart the database.
View 1 Replies
i m facing a problem in my databse when going to startup. sql> startup ora:00824- can not set sga_target due to existing inernal setting see alert log for more information . when i checked the alert log file i found
cannot set sga_target with statistics_level=basic. acutally last time i change the parameter statistics_level=basic scope=spfile (typical to basic).now my database is not open.what can i do to startup the database.I have no any type of backup.
the reason why this happen with our server.
View 4 Replies View RelatedOne user complained that, his session is closing automatically when his session exceeds exactly 01 hour 1 minute.
default profile is assigned for this user. I checked the idle_time value of this default profile. it is UNLIMITED only. What else I need to check to find out is there any timeout parameter has been set or not?
I have a table with table_ID, date_created, user_id.
I have sequence, and a BEFORE INSERT trigger, which uses the seq to increment the table_ID by 1, everytime the webpage is saved.
ques:
(1).If i have date_creted defaulted to sysdate in the table, do I need to have it in the trigger?
-- Update create_date field to current system date
:NEW.DATE_CREATED := sysdate;
(2).How can I insert the user_id in the table, each time user SAVE the page ? web page procedure is getting the user info at the beginning. can i add it in the trigger
DECLARE
v_username varchar2(10);
BEGIN
[Code]....
I have create a mview using a dblink with the refresh difference of every 10min. Suddenly I check the mview refresh date and time it was not getting refreshed automatically at the time interval specified.
drop MATERIALIZED view log on afccv.tbl_voicechat;
drop MATERIALIZED VIEW SMSCHAT.TBL_VOICECHAT_NEW1 ;
CREATE MATERIALIZED VIEW SMSCHAT.TBL_VOICECHAT_NEW1
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS NOLOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
[code]....
I am trying to find out what is the cause of not refreshing and also googled for the same. got some link also either not linked to same problem or not cleared.. Where should i checked regarding the error cause.
I have a db on 10.2.0.1 and it's going down automatically after some time with the error in alert log file smon process terminating.
View 3 Replies View Relatedwe encounter a problem with a 2-nodes RAC with 11gR2 SE : Database RAC is correctly running but we encounter problems using RAC TNS entry, obtaining the message ORA-01033.We can access to the DB using a TNS entry using each one of IP addresses but when we use the SCAN address, it fails. 2 weeks ago RAC2 node could connect perfectly with the SCAN address but RAC1 (used as a client) obtained error message almost 30% of tries.
We made a reboot of RAC1 node and now SCAN address works correctly from RAC1 and RAC2 (used as a client) fails systematically with SCAN address but works perfectly with direct access to the database.On both nodes, SCAN address is perfectly resolved by DNS server, cluster seems correct, listeners seems correct...We have opened an SR on Metalink 4 weeks ago but we don't progress.
I want to write a script and schedule it in crontab, if it is ebs I have scripts addbctl.sh and addlnctl.sh to stop database and listner. But in another application (not ebs) these scripts are not available and I have to manually bounce database, giving commands SHUTDOWN IMMEDIATE and STARTUP after logging in into sqlplus, Is there any way to do this.
I tried a script to test whether it is connecting to database or not, but it is not working. This is the script I have written in invalids.sh
sqlplus apps/pwd
select count(*) from dba_objects where status='INVALID';
exit
echo "test ran at $(date)"
When I run this script in crontab , it is not working
04 12 * * * SCRIPT_PATH/invalids.sh >> SCRIPT_PATH/logs/test.txt
Also I tried whether crontab is working or not with this line
08 12 * * * echo "crontab tested at $(date)" >> SOME_PATH/tested.txt
In tested.txt, it is printing that output properly like this
crontab tested at Thu Aug 11 12:08:01 IST 2011
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 Replies View Relatedi am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
View 22 Replies View RelatedI am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
I have database in single server. I already have ORACLE_SID=stagedb. So i want to create new sid and named as proddb.Is it possible have multiple db in single server? This server not running as RAC. It run as single only.
View 1 Replies View Relateddatabase administration , we are planning to use amazon cloud database , this database does not allow us to login to server machine , unfortunately amazon don't provide ssh to this machine , in general for doing any of adminstration task on the database will there be need to log into the machine ? we can always log in through toad or any other sql client but we cannot do ssh to server..general can this limitation effect administration ?
View 9 Replies View RelatedI recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedI am connected as System. It was the only user I set-up a password when installed the database on personal computer.
SQL> alter user sys identified by mypass007
2 /
User altered.
SQL> connect sys/mypass007
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
[code]...
SQL> conn sysoper/mypass007
ERROR:
ORA-01017: invalid username/password; logon denied
I want to know if I can access a procedure created on Database server A from database server B.
View 2 Replies View RelatedWe have an Oracle Server database of Size 50 GB having 10 GB Data. And Planning to have a new Database Server of 200GB . So my question is after moving all the 10 GB data to 200 GB Database Server, will the performance of the system come down? Will it reduce the speed?
View 9 Replies View RelatedCan I extract data from our Oracle server regarding the no. of sessions per day? But the problem is that our Boss wants a previous dates from April 11-17, 2011.
View 4 Replies View RelatedI have some requirement wherein I need to install Oracle 9i database server (9.2.0.7). I am not getting it on Oracle website. where can I get the download.
View 1 Replies View RelatedI would like to generate automatically at a certain interval a E-R diagram with all the tables in a schema and put the file on a certain location. My problem is the word AUTOMATICALLY. Toad Data Modeller does everything I want except this.
View 11 Replies View RelatedI'm connecting from SQL Server to ORACLE (ORACLE is linkedserver) and I'm trying to find out when ORACLE started and how long it has been running. Is there query or command in ORACLE that I can use to check this? Is there more than one option to find this out and is it same for all ORACLE versions or diffferent from version to version?
View 1 Replies View Relatedsee as i said keep on my database down in the night time around 9 pm. the OS redhat linux 5 restarting morning around 6.45 am.when i check alert_log there is no indication.when i check OS log , OS restarting around 6.45 amchecked in the log file in OS level
location: /var/log
i found this
Jun 7 06:45:33 Alraya syslogd 1.4.1: restart.
Jun 8 06:42:22 Alraya syslogd 1.4.1: restart.
Jun 9 06:47:12 Alraya syslogd 1.4.1: restart.
what is this mean, system restarting around 6:45 daily i think now i m posting listener.log for reference
<b>06-JUN-2010 21:04:52 *</b> (CONNECT_DATA=(CID=(PROGRAM=)(HOST=Alraya)(USER=alrayaora))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADD
RESS=(PROTOCOL=TCP)(HOST=Alraya)(PORT=1521)))(VERSION=169869568)) * status * 0
06-JUN-2010 21:05:05 * (CONNECT_DATA=(SID=alraya)(CID=(PROGRAM=perl@Alraya)(HOST=Alraya)
[code]...
OS is restarting around 6.45 in the morning, but database getting down night around 9 pm itself why then in the morning if i bounce the database it starting with no problem
I've changed the ip address of the enterprise manager grid control server. But oms could not be started. I got the error below:
[oracle@YDFULGRID bin]$ ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright © 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server Could Not Be Started
Oracle Management Server is not functioning because of the following reason:
Connection to the repository failed. Verify that the repository connection information provided is correct.
Please check /oracle/gc_inst/em/EMGC_OMS1/sysman/log/emctl.log for error details
When i checked the log:
I am getting this error:
2012-09-13 16:23:56,602 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
2012-09-13 16:23:56,602 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to servername
2012-09-13 16:24:17,638 [main] DEBUG oms.StatusOMSCmd processStatusOMS.200 - page status code is 503
2012-09-13 16:24:17,638 [main] DEBUG oms.StatusOMSCmd processStatusOMS.202 - header is 3
2012-09-13 16:24:17,639 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 3
i am configuring asm on clusterware when i create instance on node1 and node 2 a message screen appear " Cant start asm instance on node 2)When i start asm instance manually on node 2 i found the below error in alert log file.
ORA-27508 IPC error sending a message
ORA-27300 OS system dependent operation:send msg failed with status: 101
ORA-27301 OS failure message: Network is unreachable
ORA-27302 failure occurred at: sskgxpsnd1
I tried updating the oracle database from version 11.2.0.1 to 11.2.0.3 but I have no clear procedure. I chose the option of the installer "upgrade database" and install the software on a new home. To migrate, must be all oracle services stopped? In the migration phase, it is normal to ask me listener data, etc .... or installer now detects the same database?
View 1 Replies View RelatedI am using oracle 10gXE just for basic practice but its showing following Errors
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 8 11:46:34 2
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected to an idle instance.
SQL>
SQL>
SQL>
SQL> startup;
ORA-01081: cannot start already-running ORACLE - shut it down fir
SQL>
SQL>
SQL>
SQL> select * from dept;
select * from dept
[code]....
I want to migrate our production database from 9.2.0.8.0 to 10.2.0.4.0 through startup migrate ,so request you to kindly provide me a step by step doc or some reference link pertaining with same.
View 2 Replies View RelatedMY oracle database is not starting ,at startup its giving me following error message .
ORA-00600: internal error code, arguments: [kccext_info_4], [], [], [], [], [],[], []
Alert Log file showing following message ,
Tue Apr 27 14:22:26 2010
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Tue Apr 27 14:22:26 2010
ARC1: Becoming the heartbeat ARCH
Tue Apr 27 14:22:26 2010
db_recovery_file_dest_size of 2048 MB is 36.88% used.
This is auser-specified limit on the amount of space that will be used by thisdatabase for recovery-related files, and does not reflect the amount ofspace available in the underlying filesystem or ASM diskgroup.Tue Apr 27 14:22:27 2010Errors in file h:oracleproduct10.2.0adminorcl4udumporcl4_ora_3704.trc:ORA-00600: internal error code, arguments: [kccext_info_4], [], [],
[code]...
If i connect with scott user ,following message occurs ,
ORA-01033: ORACLE initialization or shutdown in progress
