Server Administration :: Not Able To Open Database
Mar 8, 2013
I am using oracle 10gXE just for basic practice but its showing following Errors
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 8 11:46:34 2
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected to an idle instance.
SQL>
SQL>
SQL>
SQL> startup;
ORA-01081: cannot start already-running ORACLE - shut it down fir
SQL>
SQL>
SQL>
SQL> select * from dept;
select * from dept
[code]....
I am facing a strange issue on 11gR2 (OEL 5.4) standby readonly with apply database.It's throwing 16000: database open for read-only access during SELECT's .
Here is snapshot of errors.
ORA-00604: error occurred at recursive SQL level 1 ORA-16000: database open for read-only access
I am using oracle 10g R2. Some how control file is corrupted and database is not open. and there is no backup of control file. Now i need to open the database without recreating the database.
My current database MAX OPEN CURSORS VALUE=300. Applications "A","B","C" using same DB user (USER1) then connect to a database.
Last night I created dedicated DB user (USER2) then application "B" connect to DB using this new user.Starting traffic increase today morning "B" application receiving "ORA-01000: maximum open cursors exceeded" error from DB.When I change current DB user USER2 to USER1, application did not receiving above errors.
I searched the knowledge base here and in other forums and haven't found the answer. There was a similar condition presented earlier, but it turned out the resolution was to run the >shutdown/>startup on the server rather than from a client. Not applicable in my case!
Shutdown and startup called used to work with 9i, now startup fails in 10g. ORACLE_HOME and ORACLE_SID are set and report correct values. What is different in 10g that the script (shown below) now throws a TNS listener error after shutdown?
I successfully upgraded from 9i to 10g (10.2.0.5.0) on Windows Server 2003, 32-bit last weekend. Now our backup_script.bat and oracle_stop_start.sql throw "ORA-12514: TNS:listener does not currently know of service requested in the connect descriptor"
This batch file and sql script predate me and worked with 9i for years. Now the startup command in the oracle_stop_start throws this error after executing shutdown. The backup batch file calls:
sqlplus "system/manager@wind as sysdba" @D:ptcwindchillackupsoracle_stop_start
The entire oracle_stop_start.sql is as follows:
shutdown immediate; startup open; quit
What is different in 10g that this now doesn't work? Shutdown works, but it will not startup due to the listener error. I have made the backups work by commenting out the call to sqlplus and I'm getting good backup dumps.
In my virtual image of the server I have found that I can duplicate the error after >shutdown. I have found that if I exit sql*plus and go back in as follows I can get the database instance to restart from the command line:
c:>sqlplus /nolog sql>connect sys/* as sysdba sql>startup open wind;
That does start, mount and open the database instance.
Is there a better way to be making sure that everything is stopped before executing the >exp command to create a backup dump? I will look into and test datapump export/import and RMAN for creating the backups, after I get this working again.
why this worked in sql*plus in 9i but not in 10g? Can I make TNS Listener smarter? Change or add variables to the startup command?
In my environment found maximum open cursor exceeds error. So how can I found the open cursor list and how can I close that cursor without restarting. Any SQL commands to close the open cursor.
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
i am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
I am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server. 2. I invoked "sqlplus" from another unix box to login to the database. 3. I found that the process id (ps -ef |grep sqlplus). 4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID, SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM, SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID FROM SYS.GV_$PROCESS, SYS.GV_$SESSION WHERE SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST' and SYS.GV_$SESSION.MACHINE like '%hostname%'
I have database in single server. I already have ORACLE_SID=stagedb. So i want to create new sid and named as proddb.Is it possible have multiple db in single server? This server not running as RAC. It run as single only.
database administration , we are planning to use amazon cloud database , this database does not allow us to login to server machine , unfortunately amazon don't provide ssh to this machine , in general for doing any of adminstration task on the database will there be need to log into the machine ? we can always log in through toad or any other sql client but we cannot do ssh to server..general can this limitation effect administration ?
I recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
I am connected as System. It was the only user I set-up a password when installed the database on personal computer.
SQL> alter user sys identified by mypass007 2 / User altered. SQL> connect sys/mypass007 ERROR: ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
We have an Oracle Server database of Size 50 GB having 10 GB Data. And Planning to have a new Database Server of 200GB . So my question is after moving all the 10 GB data to 200 GB Database Server, will the performance of the system come down? Will it reduce the speed?
Can I extract data from our Oracle server regarding the no. of sessions per day? But the problem is that our Boss wants a previous dates from April 11-17, 2011.
I have some requirement wherein I need to install Oracle 9i database server (9.2.0.7). I am not getting it on Oracle website. where can I get the download.
see as i said keep on my database down in the night time around 9 pm. the OS redhat linux 5 restarting morning around 6.45 am.when i check alert_log there is no indication.when i check OS log , OS restarting around 6.45 amchecked in the log file in OS level
location: /var/log
i found this
Jun 7 06:45:33 Alraya syslogd 1.4.1: restart. Jun 8 06:42:22 Alraya syslogd 1.4.1: restart. Jun 9 06:47:12 Alraya syslogd 1.4.1: restart.
what is this mean, system restarting around 6:45 daily i think now i m posting listener.log for reference
OS is restarting around 6.45 in the morning, but database getting down night around 9 pm itself why then in the morning if i bounce the database it starting with no problem
i m facing a problem in my databse when going to startup. sql> startup ora:00824- can not set sga_target due to existing inernal setting see alert log for more information . when i checked the alert log file i found
cannot set sga_target with statistics_level=basic. acutally last time i change the parameter statistics_level=basic scope=spfile (typical to basic).now my database is not open.what can i do to startup the database.I have no any type of backup.
I tried updating the oracle database from version 11.2.0.1 to 11.2.0.3 but I have no clear procedure. I chose the option of the installer "upgrade database" and install the software on a new home. To migrate, must be all oracle services stopped? In the migration phase, it is normal to ask me listener data, etc .... or installer now detects the same database?
I want to migrate our production database from 9.2.0.8.0 to 10.2.0.4.0 through startup migrate ,so request you to kindly provide me a step by step doc or some reference link pertaining with same.
Tue Apr 27 14:22:26 2010 ARC0: Becoming the 'no FAL' ARCH ARC0: Becoming the 'no SRL' ARCH Tue Apr 27 14:22:26 2010 ARC1: Becoming the heartbeat ARCH Tue Apr 27 14:22:26 2010 db_recovery_file_dest_size of 2048 MB is 36.88% used.
This is auser-specified limit on the amount of space that will be used by thisdatabase for recovery-related files, and does not reflect the amount ofspace available in the underlying filesystem or ASM diskgroup.Tue Apr 27 14:22:27 2010Errors in file h:oracleproduct10.2.0adminorcl4udumporcl4_ora_3704.trc:ORA-00600: internal error code, arguments: [kccext_info_4], [], [],
[code]...
If i connect with scott user ,following message occurs ,
ORA-01033: ORACLE initialization or shutdown in progress
If have several databases running on a 10.2.0.4 Oracle Home. I want to upgrade one of them to 10.2.0.5. My thinking is that I install 10.2 to another location e.g. /u01/app/oracle/product/10.2.0.5 and patch this OH to 10.2.0.5. Regarding the steps to upgrade a particular database. Oracle documentation as I'm unable to locate?
Is there any script to run or a way in oracle database to get the whole database structure such as (Tablespaces, schemas, datafiles, redo-log files, tables(structure), views....etc) plus the number of daily transactions and operations happens such as (insert, delete, update,...etc)
Generally, a fully detailed report of my database structure, changes in structure and daily DML operations.
currently holding 9i database on win2000 and front end is dev4.5 so the thing is want to upgrade by win2008 pn 32bit with 10gdatabase want to keep the front end application as it is 4.5...
will it be compiatble 10g database on 32bit 2008 and front end 4.5developer forms and reports?
can i migrate 9i database to 10g database, what are the steps for full import??
