I am reffering to one off patch "10402264" .I have to apply tihs patch to my 11.2.0.2.4 database.Is there any chart oracle provide to check if 10402264 is covered in any PSUs? or i have to go to each PSU readme and check "Bugs fixed" ?
i wish i could get somthing like this
11.2.0.2 One-off# PSU4 PSU5 11.2.0.3.0
10402264 NO YES YES
Or any other best practive
We're thinking of moving from 10.2.0.3 to 10.2.0.5 in our production Oracle RAC. The 10.2.0.5 patch is quite new and I was wondering if any of you have upgraded to this patch in any of your environments and if you experienced any issues afterwards?
View 2 Replies View RelatedI installed oracle 11.2.0.2 RAC and want to apply the PSU patch. I would like to know whether its better to apply the April 2011 PSU or July release.
View 1 Replies View RelatedI installed Oracle 10.2.0.1.0 in RH Linux 4.5. After that applied patch for 10.2.0.4.0. Everything went smoothly, but at the last steps I unknowingly clicked next button. I dont know whether some scripts is to be run as I did during installation of 10.1.0.4.0. If it is to be done I didn't do that.
How can I proceed now? If some scripts to be run where is the location? Will it cause any issue if I running it after completing the update?
where i can download the patch documentation. Is it available in the metalink (my oracle support)? if yes then is there any other way i can get hold of it?
View 6 Replies View RelatedI want to upgrade 10.2.0.1 to 10.2.0.5.
Can I straightly apply 10.2.0.5 or need to sequentially apply one by one?
can we apply 11.1.0.7 Patch Set on a 10.2.0.3 database server? i mean are patch sets cumulative or do i have to install the patch specific to my release the issue is i have the below error with rman: RMAN-03009: failure of delete command on ORA_DISK_1 channel at ORA-19633: control file record is out of sync with recovery catalog
View 7 Replies View RelatedI am using Oracle 11g (11.2.0.1.0) and I want to apply January patch on 11.2.0.1.0. I have applied 3 patches. I have single Instance with ASM and Grid.
Grid home: /opt/grid/11.2.0/grid
Oracle Home: /opt/oracle/product/11.2.0/db
1. O patch (6880880)
2. Grid patch (9655006)
3. Oracle Patch (10248516)
I have followed the following steps.
1. Applied Opatch on grid.
unzip p6880880_112000_LINUX.zip -d /opt/grid/11.2.0/grid
2. Validated the Oracle Inventory.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory -detail -oh /opt/grid/11.2.0/grid
3. Shut down the databases.
4. Run the prepatch script
./9655006/custom/server/9655006/custom/scripts/prepatch.sh
5. Shutdown the ASM.
6. Ran the below command to stop CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -unlock
7. Applied grid patch.
/opt/grid/11.2.0/grid/OPatch/opatch napply -oh /opt/grid/11.2.0/grid -id 9655006
8. Applied Opatch on Oracle home
9. Applied Oracle patch
/opt/oracle/product/11.2.0/db/OPatch/opatch napply -oh /opt/oracle/product/11.2.0/db -id 10248516
8. Run the postpatch script
./9655006/custom/server/9655006/custom/scripts/postpatch.sh
9. Run the following script to enable CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -patch
/opt/grid/11.2.0/grid/bin/crsctl check has
/opt/grid/11.2.0/grid/bin/crsctl check css
10. If CSS is not online ran the below command.
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.cssd" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.diskmon" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl stop has
/opt/grid/11.2.0/grid/bin/crsctl start has
11. Up the ASM and Databases. Ran the postinstall in GRID and Oracle.
@catbundle.sql psu apply
12. Ran the below command on grid and Oracle.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory
/opt/oracle/product/11.2.0/db/OPatch/opatch lsinventory
1. Let me know steps which are followed are right because I didnot see the version change after connecting to database? (for example 11.2.0.1.0 after applying I can see 11.2.0.1.4 but not changed the version). How should I know the patch is applied properly?
2. Is the above steps are applicable to HA setup.
I applied the Jan 09 CPU to my database this past Saturday and now my daily schema export is not running properly:
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsExport done in WE8MSWIN1252 character set and UTF8 NCHAR character set server uses UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TEST
. exporting PUBLIC type synonyms
. exporting private type synonyms
[code]...
I am running a 10g oracle DB on AIX the application running is SAP.
Now I will be applying the following patch
8201796:OPTIMIZER MERGE LABEL REQUEST ON TOP OF 10.2.0.4 FOR SAP (#10)
But I find the following patches are already applied to the system which happens to be included in 8201796
6934892,7228971,7278117.
Do i need to remove the above patches individually before applying 8201796 or will it automatically do the needful during installation.
I have installed grid and oracle 11g on linux environment. I want to installation January patch related to grid and oracle 11g. This is the first time i m going to install the oracle 11g.
View 4 Replies View RelatedHow to set Path environment variable if we want to use OPatch utility for patch upgradation.
View 2 Replies View RelatedWe are applying PSU JAN 2011 patch 10349197 on windows server 2007. While applying the patch we are getting the below error.
Following files are active :
E:oracleproduct10.2.0inoraclient10.dll
E:oracleproduct10.2.0inorapls10.dll
E:oracleproduct10.2.0inoracommon10.dll
E:oracleproduct10.2.0inorageneric10.dll
E:oracleproduct10.2.0inoraplp10.dll
[code]........
--------------------------------------------------------------------------------
The following warnings have occurred during OPatch execution:
1) OUI-67620:Interim patch 10349197 is a superset of the patch(es) [ 8559466 ]
in the Oracle Home
--------------------------------------------------------------------------------
Its not an rac. We stopped all the services running on this server.
OPatch failed with error code = 74
How do i find out the information regarding the latest patch installed for ORACLE_HOME..
OR
If given a patch number, how do i find out whether it's applied to ORACLE_HOME
We need to apply the the 11.2.0.2 database server patch and this is a 12i Ebusiness suite env. Do we need to take any precautions(other than stopping the apps) on the APPS side when we are applying the patch on the database?
View 2 Replies View RelatedI have HP server with Windows 2008 Server R2 64bit. I installed latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes after about 15 minutes - an additional log file is changed to the binary version which do not see anything.
how to solve problem? The move to Oracle 11 drops.
This is the link to my alert log file (it's strange after 10.2.0.5 patch installation):
[URL].......
I attached my spfile.ora file too:
[URL].......
I want to apply patch 13 to 11.2.0.3 database for windows server 2008 R2. I saw the pre requisites and found that opatch should be 11.2.0.1.9 or later. My optach is 11.2.0.1.7. I downloaded the patch # 11846294 and unzipped under the opatch directory. In one of the step it asked me to run the following command
$ORACLE_HOME/OPatch/oplan/oplan generateApplySteps <bundle patch location>
but then it says oplan is not recognized. I have set the Oracle_home and path variable
my path is C:Oraclegrid_homein;C:Oracledbhome_1in;C:Oraclegridin;%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;%SYSTEMROOT%System32WindowsPowerShellv1.0;C:Program FilesArcGISArcSDEora11gexein;C:Program FilesXIVhost_attachin;C:Oracledbhome_1oplan
Note that my database version is 11.2.0.3 with ASM
I need some detail information regarding the CPM Patches released by oracle quarterly.
Is it compulsory to set the CPM patch when it is being realized. How to set or apply this patch. (either by runInstaller or OPatch utility i am not sure about this)
What is the difference between the interim & CPM patches.
I've been told by management this weekend I will be required to perform a complete patch of our Oracle 11g database.
Problem is I really have never installed / patched Oracle. I'm able to access pretty much any database here and interact with it from a SQL stand point so since I'm the only person in my entire office who knows SQL, they decided I can become their full blow DBA.
Currently the database is running a unpatched version:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
Once I download the latest patch (11.2.0.2.0) files from Oracle & perform a complete backup using RMAN:
RMAN> backup full as compressed backupset database plus archivelog;
How exactly does one properly patch / update Oracle 11g to the latest version?
Had 10.2.0.3 on Win Server 2003 and ran patch set 3. Now have 10.2.0.4 but cannot login. Here is what I get along with other info.
-------
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Mar 24 14:27:31 2011
Copyright © 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
--------
My listener service is running. Listener.ora is:
---------
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = W2K3-TX-ORA)(PORT = 1521))
)
)
-----------
Running TNSPING:
C:\oracle\product\10.2.0\db_1\network\ADMIN>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.2.0.4.0 - Production on 24-MAR-2011 14:35:35
Copyright © 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = W2K3-TX-ORA)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME
= ORCL)))
OK (60 msec)
Does we need to apply the patches in sequence. i installed oracle 11g r2 today only, then which patch i can install. if i like to install CPU, then does i need to install all the previous or only the latest one. if only latest one only, then how can i find the CPU patch number.
of course, instead of cpu i can install psu patch, then which one has to install. only latest one or all previous also. if latest one only how to find latest psu patch that has to apply.
Version : 11.2.0.1
Os : Aix 6
We recently upgraded from 11.2.0.1 to 11.2.0.3.We completed db upgrade sucessfully. We got the follwoing error While applying PSU patch. It shows the patch 13923374 failed.But when i check in opatch lsinventory,it shows that patch is applied.
root@ppseelm-ax2041:/u01/app/oracle/11.2.0.3/product/ginfra/grid_home/OPatch: ra/grid_home/OPatch/ocm/bin/ocm.rsp <
Executing /usr/bin/perl ./crs/patch112.pl -patchdir /backup/11203_softwares -patchn patch -ocmrf /u01/app/oracle/11.2.0.3/product/ginfra/grid_home/OPatch/ocm/bin/ocm.rsp -paramfile /u01/app/oracle/11.2.0.3/product/ginfra/grid_home/crs/install/crsconfig_params
opatch auto log file location is /u01/app/oracle/11.2.0.3/product/ginfra/grid_home/OPatch/crs/../../cfgtoollogs/opatchauto2012-10-21_10-39-53.log
Detected Oracle Restart install
[code]....
I read on the oracle site that Windows 8 support will come with Oracle version 11.2.0.4 and higher. Without a maintenance contract I see only 11.2.0.3. What version of Oracle is now the latest, is patch 11.2.0.4 out?
View 5 Replies View Relatedi'm a student currently learning database administration security.
I need to create a tablespace for administration of database but i don't know what datafile settings are best suited for admin usage.
I have attached the schema that was given to me for this assignment.
I have a "pure" client / server environment with forms/reports 6i (NO form server architecture) and my necessity is to retrieve data from Web Service Call within Forms.
Do you have any simple example for realize this? Javaimporter is the right solution or not?
I am trying to patch 10.2.0.3 to 10.2.0.5.I run the runInstaller, it was not successful because it was pointing to a wrong home name and path.Then I changed according to working condition. Then the installation was successful.Then I run the catupgrd.sql. It was also successful with no errors.Then I run utlrp.sql, it was also successful with no error.I did a shutdown and startup.
When I query:
select * from v$version;
It is giving the output as the oldversion as 10.2.0.3
Quote:Every patch or patch set also has a patch number to identify it
All patch and patch set releases carry version numbers.
For ex : Oracle 10g Release 10.2.0.1, then an available patch set might be 10.2.0.2 , .... , 10.2.4.0 , 10.2.5.0
My QUES is : How can i identify Patch no ? How it is differ from patchsets no ?..
identify the latest Critical Patch Update for 10g RAC. My DB server is 10g RAC 2 node cluster running on IBM Aix Pseries servers. The version is 10.2.0.3.
View 1 Replies View Relatedhow can i find the oracle patch on os window. oracle 10.2.0.1
i m using sql>opatch lsinventory but cant work.
I applied this patch in our development environment. After validation, I need to apply the same in production, training and publication environments. The detailed information follows :
PowerPC_POWER5 / aix 5300-12
OPatch utility used : 11.2.0.3.0
OUI version : 11.2.0.2.0
Prereq "checkConflictAgainstOHWithDetail" passed.
Composite patch 13923804 successfully applied.
OPatch Session completed with warnings.
Stderr output:
ld: 0711-224 WARNING: Duplicate symbol: p_xargc
ld: 0711-224 WARNING: Duplicate symbol: p_xargv
ld: 0711-224 WARNING: Duplicate symbol: .kghalf
ld: 0711-224 WARNING: Duplicate symbol: .kghalp
ld: 0711-224 WARNING: Duplicate symbol: .bcopy
ld: 0711-224 WARNING: Duplicate symbol: .kghgrw
ld: 0711-224 WARNING: Duplicate symbol: .kghfrf
[code]....
OPatch completed with warnings.
As they are harmless ? Whether I need to rollback ?