Does we need to apply the patches in sequence. i installed oracle 11g r2 today only, then which patch i can install. if i like to install CPU, then does i need to install all the previous or only the latest one. if only latest one only, then how can i find the CPU patch number.
of course, instead of cpu i can install psu patch, then which one has to install. only latest one or all previous also. if latest one only how to find latest psu patch that has to apply.
We need to apply the the 11.2.0.2 database server patch and this is a 12i Ebusiness suite env. Do we need to take any precautions(other than stopping the apps) on the APPS side when we are applying the patch on the database?
View 2 Replies View RelatedI want to upgrade 10.2.0.1 to 10.2.0.5.
Can I straightly apply 10.2.0.5 or need to sequentially apply one by one?
can we apply 11.1.0.7 Patch Set on a 10.2.0.3 database server? i mean are patch sets cumulative or do i have to install the patch specific to my release the issue is i have the below error with rman: RMAN-03009: failure of delete command on ORA_DISK_1 channel at ORA-19633: control file record is out of sync with recovery catalog
View 7 Replies View RelatedI want to apply patch 13 to 11.2.0.3 database for windows server 2008 R2. I saw the pre requisites and found that opatch should be 11.2.0.1.9 or later. My optach is 11.2.0.1.7. I downloaded the patch # 11846294 and unzipped under the opatch directory. In one of the step it asked me to run the following command
$ORACLE_HOME/OPatch/oplan/oplan generateApplySteps <bundle patch location>
but then it says oplan is not recognized. I have set the Oracle_home and path variable
my path is C:Oraclegrid_homein;C:Oracledbhome_1in;C:Oraclegridin;%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;%SYSTEMROOT%System32WindowsPowerShellv1.0;C:Program FilesArcGISArcSDEora11gexein;C:Program FilesXIVhost_attachin;C:Oracledbhome_1oplan
Note that my database version is 11.2.0.3 with ASM
This is 2 node RAC database. Usually every month my system admin was applying OS critical patch then reboot the server.
While doing this activity i have stop all CRS and DB services. As usual i have did same in both the nodes and applied the patch and reboot the server.
After tried to start the CRS service and database services was used the following command. Except node1 instances all services are started.
E:oraclecrsproduct11.1.0crsBIN>crs_Stat -t
Name Type Target State Host
------------------------------------------------------------
ora....main.db application ONLINE ONLINE inf-...b-03
ora....n1.inst application ONLINE OFFLINE
ora....n2.inst application ONLINE ONLINE inf-...b-04
ora....SM1.asm application ONLINE ONLINE inf-...b-03
[code].....
Then i have tried to applied to old ocr backup also, then also i am getting same error.
I have a 2 node RAC environment (11.2.0.3) where each node has there own local Grid_home and RDBMS_home.
I am installing a Rolling Bundle Patch with OPatch in this environment. The installation document says that "The order of patching in RAC install is GRID_HOME, then RDBMS_HOME" so i did the following.
1. stopped all oracle related services on node1
2. set oracle_home=<Grid_home>
3. applied the opatch
4. opatch succeeded on node1 and it says "The node 'NODE2' will be patched next... Is the node ready for patching?
1. Should i shutdown the oracle services in Node2 and continue to patch the Grid_home ? If yes then the DB will be completely down for user access. This defeats the purpose of rolling mode which says there is no downtime.
2. Should i patch the RDBMS_home on node1 , start all the oracle services on node1 , stop the oracle services on node2 and then resume the opatch on node1 which is waiting to patch the Grid_home on node2 ?
How to apply patchset (10.2.5) with no downtime?
My db version is 10.2.4 and OS is hp-ux
I need to migrate a 500 GB 10.2 database from windows to linux. Of course I found Alejandro Vargas paper on how to do that ("Database Migration From Windows to Linux Using RMAN"). My problem is that the source database will be up again for 7 days and I need to apply all changes made to the source database to the migrated linux database.
Can I just take all redo log files generated from the source database and apply those to the destination database? I might have a problem with a) file conversion and that the redo log are not in sync with the target database (different check points?).I just found that on an exotic website: "The contents of a redo log file depend on a combination of Oracle version, operating system and server architecture. In general redo logs written on one architecture cannot be read on another. There are a few exceptions to this rule. For example, in Oracle 10.2 a redo log written in Linux can be read by a Windows database."
So if this is true, does it also work the other way AND will the database migration from window to linux create a perfect clone of the database where those redo log files actually can be applied to?
I have created Replication process for a single table using the below mentioned script.
connect sys/afccv@afccv as sysdba
show parameter open_cursor
create user STRMADMIN identified by STRMADMIN;
ALTER USER STRMADMIN DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP QUOTA UNLIMITED ON USERS;
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
connect sys/vxmldb@vxmldb as sysdba
[code]....
According to Alert log file Replication process started( Refer Alert log content below
Wed Oct 05 12:45:53 2011
Streams CAPTURE CP01 for STRMADMIN_CAPTURE started with pid=256, OS id=8692
Starting persistent Logminer Session with sid = 41 for Streams Capture STRMADMIN_CAPTURE
Wed Oct 05 12:46:20 2011
LOGMINER: Parameters summary for session# = 41
[code]....
Now When I am checking the apply status then it is showing Dequeue message
SQL> l
1* select apply_name,state,DEQUEUE_TIME from V$STREAMS_APPLY_READER
SQL> /
APPLY_NAME STATE DEQUEUE_TIME
------------------------------ ----------------- --------------------
STRMADMIN_APPLY DEQUEUE MESSAGES
when I am checking the number of rows on both tables (source and destination) , at destination it is not applying any thing.
How To Apply Group by Command in Forms 6i at block level for example in data block a field name is code,quantity and code replicate many times it is not working with out commit but i want to calculate sum of quantity in data block by code group before commit
if we apply this command at sql level then command is
select code,sum(nvl(quantity,0)) from sal_detail group by code and its work very well
I will begin to install Oracle Clusterware (11gR2), but I need to know how much space should I apply for the ASM instance? What size should I apply the shared disk to the nodes?
View 5 Replies View RelatedCan we apply LPAD in NUMBER datatype?
View 11 Replies View RelatedMy setup is following:
CODEhost22 (Oracle Linux 5.9) | host30 (Windows XP) with SQL Server Express 2008
DB22 | Gateway to MSSQL | DB30
Local Local | |
Capture --> Apply ------> Gateway -----------------> DUMMYUSR.DUMMYTBL
Process Process | |
Capture process on DB22 captures changes made to local DUMMYUSR.DUMMYTBL table, enqueues it to capture queue and propagates to apply queue for local apply process, which, using database link DB30 supposed to apply these changes to table DUMMYUSR.DUMMYTBL on remote SQL Server database DB30.
The problem is that when apply process is executing transaction, it aborts with error:
QUOTE ORA-26713: remote object does not exists or is inaccessible.
ORA-26712: remote object is "DUMMYUSR"."DUMMYTBL"@"DB30".
In trace log I can see the following message:
QUOTE kniNoPrimaryKeyError: ORA-26713, remote obj doesn't exist,
DUMMYUSR.DUMMYTBL@DB30
[code]...
what can cause ORA-26713 error of apply process applying changes to SQL Server database through Oracle Database Gateway, if object to be modifyed exists and accessible from Oracle database for strmadmin user?
By the way, database link and tables were created with following commands: CODEDB22(Oracle): (connected as strmadmin) create database link DB30 connect to "dummyusr" identified by "dummypwd" using 'DB30';
DB22(Oracle): (connected as dummyusr)
create table DUMMYTBL (no number, name char(6), ddate date, payload varchar2(2013));
DB30(MSSQL): (connected as dummyusr)
create schema DUMMYUSR authorization dummyusr;
create table DUMMYUSR.DUMMYTBL (no float(53), name char(6), ddate datetime2(0), payload varchar(2013));
i have attended an interview there i got a question like--->There are 100 archives generated in standby in that a series of five archives are missing and those are not available in the primary then how will you do.....
View 2 Replies View RelatedHow can i apply composite key on a table?
View 2 Replies View RelatedI want to apply divide and conquer approach on the field value, For example I have the field value like this
Value
32,36,12,65,85,9663
43,36,89,65,112,9663
36,63,12,65,95,123
32,36,12,85, 85,9663
Remember that these value are taken from ONLY one field i.e Value. Apply the divide and conquer approach in such a manner that take the value of a single field and each row and divide the value into two half. Continue this process until single value until we reach the single value or single sub problems.
Apply the divide and conquer approach on all the value of field. When we get final value then match the value of two different rows. And check how much field value are similar (match or duplicated). If field values are match more then 80% then delete the duplicated value and keep the original entity.
I have two tables like below-
CREATE TABLE prod_vendor_record (
vendor_record_seq_no NUMBER NOT NULL,
study_seq_no NUMBER NOT NULL,
vendor_subject_seq_no NUMBER NULL,
control_dataset_seq_no NUMBER NOT NULL,
checksum NUMBER NOT NULL,
processing_flag VARCHAR2(1) NULL,
[code]....
and executing below query on those tables-
insert into prod_temp_vendor(vendor_record_seq_no,checksum,rownumber,transaction_type,iu_flag)
select vr.vendor_record_seq_no, tvr.checksum, tvr.rownumber, tvr.transaction_type, 'U' from
prod_vendor_record vr, prod_temp_vendor_record_20000 tvr
where vr.study_seq_no=25707
and vr.control_dataset_seq_no=3910
and vr.key_hash=tvr.key_hash
and dbms_lob.compare(vr.key_col_val, tvr.key_col_val) = 0
and tvr.error_flag is null;
let me know on which columns of PROD_VENDOR_RECORD table to apply index to make processing faster. As I tried to build index like below-
CREATE INDEX idx_prod_vendor_record
ON prod_vendor_record (
study_seq_no,
control_dataset_seq_no,
key_hash
)
/
But it is not being used by above query (see execution plan)
--------------------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | TQ |IN-OUT| PQ Distrib |
--------------------------------------------------------------------------------------------------------------------------------------
| 0 | INSERT STATEMENT | | | | 5168 (100)| | | | |
| 1 | PX COORDINATOR | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10002 | 212 | 445K| 5168 (1)| 00:01:03 | Q1,02 | P->S | QC (RAND) |
[code]....
Oracle 11.2.0.3.0
I have a primary database orcl and logical standby database orcl_std.
Real time apply is enabled. I have standby redologs in both primary and standby sides and I`ve started recovery with below command:
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
When I create a new table in primary database, I am unable to see it on standby database (Although real time apply is enabled) However, when I switch log in primary, I can see the new table in standby database.
My question is, why realtime apply is not working in my scenerio ? I was expecting to see the new table immediately in standby database once it is created in primary database. Why am I supposed to wait for log switch in real time apply ?
,I am trying to set up Streams on a 11.2.0.3 on a Windows 2008R2 server. Due to an error in running propagation, i a, trying to delete both Capture and Apply queues. I have deleted the Apply queues but unable to drop the Catpure,
SQL>EXEC DBMS_APPLY_ADM.STOP_APPLY(apply_name =>'LAO_NLPG73_BLPU_APPLY'); SQL> select * from dba_apply; LAO_NLPG73_BLPU_APPLY NLPG73_BLPU_APPLY_Q STRMADMIN YES RULESET$_732 STRMADMIN STRMADMIN 301355 ABORTED 09/10/2013 17:34:21 1013 ORA-01013: user requested cancel of current operation CAPTURED STREAMS APPLY SQL> select * from dba_queues; STRMADMIN NLPG73_BLPU_APPLY_Q
[code]...
I've been told by management this weekend I will be required to perform a complete patch of our Oracle 11g database.
Problem is I really have never installed / patched Oracle. I'm able to access pretty much any database here and interact with it from a SQL stand point so since I'm the only person in my entire office who knows SQL, they decided I can become their full blow DBA.
Currently the database is running a unpatched version:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
Once I download the latest patch (11.2.0.2.0) files from Oracle & perform a complete backup using RMAN:
RMAN> backup full as compressed backupset database plus archivelog;
How exactly does one properly patch / update Oracle 11g to the latest version?
Had 10.2.0.3 on Win Server 2003 and ran patch set 3. Now have 10.2.0.4 but cannot login. Here is what I get along with other info.
-------
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Mar 24 14:27:31 2011
Copyright © 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
--------
My listener service is running. Listener.ora is:
---------
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = W2K3-TX-ORA)(PORT = 1521))
)
)
-----------
Running TNSPING:
C:\oracle\product\10.2.0\db_1\network\ADMIN>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.2.0.4.0 - Production on 24-MAR-2011 14:35:35
Copyright © 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = W2K3-TX-ORA)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME
= ORCL)))
OK (60 msec)
Version : 11.2.0.1
Os : Aix 6
We recently upgraded from 11.2.0.1 to 11.2.0.3.We completed db upgrade sucessfully. We got the follwoing error While applying PSU patch. It shows the patch 13923374 failed.But when i check in opatch lsinventory,it shows that patch is applied.
root@ppseelm-ax2041:/u01/app/oracle/11.2.0.3/product/ginfra/grid_home/OPatch: ra/grid_home/OPatch/ocm/bin/ocm.rsp <
Executing /usr/bin/perl ./crs/patch112.pl -patchdir /backup/11203_softwares -patchn patch -ocmrf /u01/app/oracle/11.2.0.3/product/ginfra/grid_home/OPatch/ocm/bin/ocm.rsp -paramfile /u01/app/oracle/11.2.0.3/product/ginfra/grid_home/crs/install/crsconfig_params
opatch auto log file location is /u01/app/oracle/11.2.0.3/product/ginfra/grid_home/OPatch/crs/../../cfgtoollogs/opatchauto2012-10-21_10-39-53.log
Detected Oracle Restart install
[code]....
I read on the oracle site that Windows 8 support will come with Oracle version 11.2.0.4 and higher. Without a maintenance contract I see only 11.2.0.3. What version of Oracle is now the latest, is patch 11.2.0.4 out?
View 5 Replies View RelatedCan I apply Referential Integrity to only selected rows of a particular column? This is the reference key to the primary key to another table. But, the issue is, this reference column is not having mandatory data for all the rows. So, whenever this is null, I dont want it to be referred by parent table.
no, and it makes no sense to do so either
We have an appointment form in our HIS, where patients take telephonic appointment. That time they may not know their user id given by hospital. So, it remains blank & name is entered manually. But if the user-id is entered, it must fetch patient name from the master.
The candidate key must be unique within its domain.The candidate key can not hold NULL values.
ALTER TABLE HLTHCHKAPPOINTHD ADD (
CONSTRAINT SYS_C007145
FOREIGN KEY (N_PATIENTMR_ID)
REFERENCES MRREGISTRTNHD (N_PATIENTMR_ID));
MRREGISTRTNHD is a patient master & has a primary key named N_PATIENTMR_ID.
HLTHCHKAPPOINTHD is a appointment table & has a foreign key named N_PATIENTMR_ID which references N_PATIENTMR_ID of MRREGISTRTNHD.
Also, N_PATIENTMR_ID of HLTHCHKAPPOINTHD is not a unique key & it can contain null values also. I want to define constraint or any other method such that only the not null values are referenced to the master i.e. it should validate in the master. And null values should skip this reference.
Now, what happens is due to this constraint, when I'm trying to edit & update the rows having null value in N_PATIENTMR_ID, it gives the following error.
ORA-02291: Integrity constraint (SYS_C007145) violated - parent key not found
So, can I give some condition in the above constraint saying, apply this constraint to table HLTHCHKAPPOINTHD only having the not-null values in N_PATIENTMR_ID coulmn?
1) The Primary Database is UP. The Physical Stand By Database is DOWN. The Current Archive Log Sequence is 99 in Primary.
We have to apply Archive Log from 51 to 99 to the Standby Database. But Unfortunately, there is no backup of those Archivelogs and the ArchiveLogs from 51 to 98 have got deleted at Primary end.
Now how will you apply these Archive Logs from Primary Database to Physical Standby Database?
Note : The Physical StandBy Database is DOWN.
We are going to set up dataguard physical standby on 2-node RAC, which primary is also 2-node RAC.
PRD site: prd-node1 & prd-node2DR site: dr-node1 & dr-node2.
As I know, there is only 1 instance to do the redo apply on standby (i.e. dr-node1).
My question is, what will happen if dr-node1 failure (by shutdown abort or kill process)? will dr-node2 change to redo apply?
I want to understand the restrictions that apply to VPD functions when used for column masking, compared with their use for Row-Level Security. According to the Oracle Database Security Guide (11g Release 1) Column-masking conditions generated by the policy function must be simple Boolean expressions, unlike regular Oracle Virtual Private Database predicates.
I have long understood the above as implying that column-masking conditions should not contain sub-queries (i.e. inner selects). However, we tested using a condition with a select inside another select (2-level nesting) and yet it worked. We were on 11g Release 2, by the way. So, I wonder about using sub-queries in column-masking conditions? Or, alternatively, what Oracle means with "regular VPD predicates" and "simple Boolean expressions" (of course, in the context of VPD)?
i want to apply validation on date item. i have created some cases if any case would be fail then error shold be fire.How can i do this.
my code
DECLARE
F DATE;
T DATE;
BEGIN
SELECT TO_DATE(F_DATE),TO_DATE(T_DATE) INTO F,T FROM VENDOR_CONTRACT_MAS WHERE CONTRACT_ID=:P5_CONTRACT_ID
[code]...
I have a "pure" client / server environment with forms/reports 6i (NO form server architecture) and my necessity is to retrieve data from Web Service Call within Forms.
Do you have any simple example for realize this? Javaimporter is the right solution or not?