Server Administration :: Getting Error While Applying PSU Patch On Windows
Apr 7, 2011
We are applying PSU JAN 2011 patch 10349197 on windows server 2007. While applying the patch we are getting the below error.
Following files are active :
E:oracleproduct10.2.0inoraclient10.dll
E:oracleproduct10.2.0inorapls10.dll
E:oracleproduct10.2.0inoracommon10.dll
E:oracleproduct10.2.0inorageneric10.dll
E:oracleproduct10.2.0inoraplp10.dll
[code]........
--------------------------------------------------------------------------------
The following warnings have occurred during OPatch execution:
1) OUI-67620:Interim patch 10349197 is a superset of the patch(es) [ 8559466 ]
in the Oracle Home
--------------------------------------------------------------------------------
Its not an rac. We stopped all the services running on this server.
OPatch failed with error code = 74
View 4 Replies
ADVERTISEMENT
May 19, 2011
I installed Oracle 10.2.0.1.0 in RH Linux 4.5. After that applied patch for 10.2.0.4.0. Everything went smoothly, but at the last steps I unknowingly clicked next button. I dont know whether some scripts is to be run as I did during installation of 10.1.0.4.0. If it is to be done I didn't do that.
How can I proceed now? If some scripts to be run where is the location? Will it cause any issue if I running it after completing the update?
View 1 Replies
View Related
Aug 18, 2013
Database = 11.2.0.3.0
Operating System : Solaris 11 sparc 64.
applying PSU patch : 16619892
I am trying to apply patch 16619892 on 11.2.0.3.0 to upgrade it to 11.2.0.3.7.
I hope this is a straight forword stuff i beleive, but i am getting the following errors and log details.
$ cd /noracle/patch/16619892/
xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
[Code].....
View 8 Replies
View Related
May 23, 2012
Just to confirm with you if we can apply the October 2011 Critical Patch Update (CPU) to address vulnerabilities covered from CPU 2007 up to CPU 2011?
The PC Server (staging) where patching will be applied is running under Windows Vista have not been patched since it's database creation. This is maintained by our Contractors.
View 2 Replies
View Related
Jan 8, 2010
Tried restarting OracaleDBConsole service after a Windows security patch was installed and now I'm getting error 1053:The service did not respond to the start or control request in a timely fashion" error message when you stop or pause a managed Windows service.
Apparently it was a MS known issue and it has been fixed in .NET v1.1 which is what was installed(& I didn't have any problems) before server team installed the latest security update which was .NET v2.0
View 2 Replies
View Related
Apr 28, 2011
I have HP server with Windows 2008 Server R2 64bit. I installed latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes after about 15 minutes - an additional log file is changed to the binary version which do not see anything.
how to solve problem? The move to Oracle 11 drops.
This is the link to my alert log file (it's strange after 10.2.0.5 patch installation):
[URL].......
I attached my spfile.ora file too:
[URL].......
View 1 Replies
View Related
Nov 27, 2012
I want to apply patch 13 to 11.2.0.3 database for windows server 2008 R2. I saw the pre requisites and found that opatch should be 11.2.0.1.9 or later. My optach is 11.2.0.1.7. I downloaded the patch # 11846294 and unzipped under the opatch directory. In one of the step it asked me to run the following command
$ORACLE_HOME/OPatch/oplan/oplan generateApplySteps <bundle patch location>
but then it says oplan is not recognized. I have set the Oracle_home and path variable
my path is C:Oraclegrid_homein;C:Oracledbhome_1in;C:Oraclegridin;%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;%SYSTEMROOT%System32WindowsPowerShellv1.0;C:Program FilesArcGISArcSDEora11gexein;C:Program FilesXIVhost_attachin;C:Oracledbhome_1oplan
Note that my database version is 11.2.0.3 with ASM
View 7 Replies
View Related
Jan 24, 2012
I am reffering to one off patch "10402264" .I have to apply tihs patch to my 11.2.0.2.4 database.Is there any chart oracle provide to check if 10402264 is covered in any PSUs? or i have to go to each PSU readme and check "Bugs fixed" ?
i wish i could get somthing like this
11.2.0.2 One-off# PSU4 PSU5 11.2.0.3.0
10402264 NO YES YES
Or any other best practive
View 1 Replies
View Related
Aug 19, 2010
We're thinking of moving from 10.2.0.3 to 10.2.0.5 in our production Oracle RAC. The 10.2.0.5 patch is quite new and I was wondering if any of you have upgraded to this patch in any of your environments and if you experienced any issues afterwards?
View 2 Replies
View Related
Sep 12, 2011
I installed oracle 11.2.0.2 RAC and want to apply the PSU patch. I would like to know whether its better to apply the April 2011 PSU or July release.
View 1 Replies
View Related
Oct 27, 2011
where i can download the patch documentation. Is it available in the metalink (my oracle support)? if yes then is there any other way i can get hold of it?
View 6 Replies
View Related
Nov 22, 2010
I want to upgrade 10.2.0.1 to 10.2.0.5.
Can I straightly apply 10.2.0.5 or need to sequentially apply one by one?
View 2 Replies
View Related
Mar 25, 2010
can we apply 11.1.0.7 Patch Set on a 10.2.0.3 database server? i mean are patch sets cumulative or do i have to install the patch specific to my release the issue is i have the below error with rman: RMAN-03009: failure of delete command on ORA_DISK_1 channel at ORA-19633: control file record is out of sync with recovery catalog
View 7 Replies
View Related
Jan 31, 2011
I am using Oracle 11g (11.2.0.1.0) and I want to apply January patch on 11.2.0.1.0. I have applied 3 patches. I have single Instance with ASM and Grid.
Grid home: /opt/grid/11.2.0/grid
Oracle Home: /opt/oracle/product/11.2.0/db
1. O patch (6880880)
2. Grid patch (9655006)
3. Oracle Patch (10248516)
I have followed the following steps.
1. Applied Opatch on grid.
unzip p6880880_112000_LINUX.zip -d /opt/grid/11.2.0/grid
2. Validated the Oracle Inventory.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory -detail -oh /opt/grid/11.2.0/grid
3. Shut down the databases.
4. Run the prepatch script
./9655006/custom/server/9655006/custom/scripts/prepatch.sh
5. Shutdown the ASM.
6. Ran the below command to stop CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -unlock
7. Applied grid patch.
/opt/grid/11.2.0/grid/OPatch/opatch napply -oh /opt/grid/11.2.0/grid -id 9655006
8. Applied Opatch on Oracle home
9. Applied Oracle patch
/opt/oracle/product/11.2.0/db/OPatch/opatch napply -oh /opt/oracle/product/11.2.0/db -id 10248516
8. Run the postpatch script
./9655006/custom/server/9655006/custom/scripts/postpatch.sh
9. Run the following script to enable CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -patch
/opt/grid/11.2.0/grid/bin/crsctl check has
/opt/grid/11.2.0/grid/bin/crsctl check css
10. If CSS is not online ran the below command.
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.cssd" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.diskmon" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl stop has
/opt/grid/11.2.0/grid/bin/crsctl start has
11. Up the ASM and Databases. Ran the postinstall in GRID and Oracle.
@catbundle.sql psu apply
12. Ran the below command on grid and Oracle.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory
/opt/oracle/product/11.2.0/db/OPatch/opatch lsinventory
1. Let me know steps which are followed are right because I didnot see the version change after connecting to database? (for example 11.2.0.1.0 after applying I can see 11.2.0.1.4 but not changed the version). How should I know the patch is applied properly?
2. Is the above steps are applicable to HA setup.
View 7 Replies
View Related
Feb 10, 2009
I applied the Jan 09 CPU to my database this past Saturday and now my daily schema export is not running properly:
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsExport done in WE8MSWIN1252 character set and UTF8 NCHAR character set server uses UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TEST
. exporting PUBLIC type synonyms
. exporting private type synonyms
[code]...
View 8 Replies
View Related
Feb 18, 2010
I am running a 10g oracle DB on AIX the application running is SAP.
Now I will be applying the following patch
8201796:OPTIMIZER MERGE LABEL REQUEST ON TOP OF 10.2.0.4 FOR SAP (#10)
But I find the following patches are already applied to the system which happens to be included in 8201796
6934892,7228971,7278117.
Do i need to remove the above patches individually before applying 8201796 or will it automatically do the needful during installation.
View 4 Replies
View Related
Jan 16, 2011
I have installed grid and oracle 11g on linux environment. I want to installation January patch related to grid and oracle 11g. This is the first time i m going to install the oracle 11g.
View 4 Replies
View Related
Mar 14, 2012
How to set Path environment variable if we want to use OPatch utility for patch upgradation.
View 2 Replies
View Related
Feb 23, 2010
How do i find out the information regarding the latest patch installed for ORACLE_HOME..
OR
If given a patch number, how do i find out whether it's applied to ORACLE_HOME
View 1 Replies
View Related
Nov 20, 2012
I read on the oracle site that Windows 8 support will come with Oracle version 11.2.0.4 and higher. Without a maintenance contract I see only 11.2.0.3. What version of Oracle is now the latest, is patch 11.2.0.4 out?
View 5 Replies
View Related
Apr 20, 2012
how can i find the oracle patch on os window. oracle 10.2.0.1
i m using sql>opatch lsinventory but cant work.
View 10 Replies
View Related
Sep 14, 2012
Where to take and how to find the latest versions of patches GI Patch Set Update for Windows?
For a DB there is article "*ALERT: Oracle 11g Release 2 (11.2) Support Status and Alerts [ID 880782.1]*". I am signed on notification messages by mail. When article *880782.1* changes, to me the notification message comes. From *880782.1* it is possible to pass in article "*Oracle Database, Networking and Grid Agent Patches for Microsoft Platforms [ID 161549.1]*". Here there are links to the latest versions of patches.
The latest versions for GI Patch Set Update it is possible to look in article "*Oracle Recommended Patches - Oracle Database [ID 756671.1]*" but here is not present Windows platform.
1). Where to take and how to find the latest versions of patches GI Patch Set Update for Windows?
2). Whether It is possible GI Patch Set Update for Windows to find by means of searching on tab MOS "*Patches & Updates*"?
View 3 Replies
View Related
Apr 8, 2010
My manager is asking to create a SQL scrip, which will provide following information.
Our database is 9.2.0.7.0 on Windows 2000 Server
-How many records Insert / Update or Delete daily in my Oracle database?
- Check Archive log / Redo Log switching information?
-Check database growth ?
View 10 Replies
View Related
Jan 11, 2011
i am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
View 1 Replies
View Related
Jun 27, 2012
I was trying to delete the database in the test server. When i was deleting listener was already stopped, i continued deleting using dbca, it shown me some alert that datafiles cant be deleted because system could't find database, since listner was stopped so only service was deleted(the one showing in the windows administrator toolsservicesOracleServiceTEST).
All the datafile parameter files are still there. How can i delete the datafiles and parameter files belongs to that database or how to create the deleted service, so that i will start the listener and do the complete deleting of the database.
View 3 Replies
View Related
Oct 31, 2012
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
View 22 Replies
View Related
Apr 19, 2011
I want to install Oracle 11g R2 in windows 2008 64 bit server. How can I know whether my server is ready to install Oracle ie is all components are available in server or any patch is to be applied etc.
View 3 Replies
View Related
Apr 26, 2012
I have oracle XE installed on my machine and it was working absolutely fine for the last year or so. Today there was an trojan intrusion which caused some issues with my windows xp OS like hiding some files, desktop etc. After everything was cleaned up and things back to normal. I am having issues with XE.
1. I can start and stop XE with out any issues
2. When I use the run sql command line, I can connect using - connect sys/sys as sydba.
3. I can also run a query to see all the users and see the HR user also.
However,
1. When I connect to my hr user using connect hr/password@xe, it just hangs
2. I tried the- go to Oracle XE admin page but it just hangs for a long time and returns page cannot be found.
3. I can tnsping the xe instance.
Is a fresh install the only option? or is there any way to correct this using the sys/sys user?
View 9 Replies
View Related
May 21, 2010
I already succeded to setyup Oracle 10 G on my machine , when trying to connect by system/system it does not connect.The listener is OK and instance ok.
View 10 Replies
View Related
Mar 30, 2011
I wanted to transfer my database from Oracle 11.1.0. on windows 2003 server 32 bit to Oracle 11.2.0. windows server 2008 64 bit
i have done following
1)On new server of 11.2.0 windows 2008 64 bit use rman backup from Oracle 11.1.0. on windows 2003 server 32 bit to restore the database and recover the database when i try to open the database Alter database open it gave me message that i should start my database as upgrade I start the database with upgrade
STARTUP UPGRADE and then run following
@?/rdbms/admin/utlirp.sql
and then run following
@?/rdbms/admin/utlu112i.sql
and then run
@?/rdbms/admin/catupgrd.sql
during run of catupgrd.sql after around 30 minutes of run, i got error
ORA-03113: end-of-file on communication channel
but i reconnected myself with database again and shutdown the database and open it in normal mode and it has opened there were thousands of uncompiled objects and i recompiled them.
Only uncompiled objects left 60 are 'OLAPSYS' (Locked user) USER and 30 of PUBLIC user (all Synonyms)
Have i taken correct steps?
What should i do now to check that everything will be alright in future
View 6 Replies
View Related
