Server Administration :: Applying Patch (10.2.0.1.0 To 10.2.0.4.0)
May 19, 2011
I installed Oracle 10.2.0.1.0 in RH Linux 4.5. After that applied patch for 10.2.0.4.0. Everything went smoothly, but at the last steps I unknowingly clicked next button. I dont know whether some scripts is to be run as I did during installation of 10.1.0.4.0. If it is to be done I didn't do that.
How can I proceed now? If some scripts to be run where is the location? Will it cause any issue if I running it after completing the update?
View 1 Replies
ADVERTISEMENT
Apr 7, 2011
We are applying PSU JAN 2011 patch 10349197 on windows server 2007. While applying the patch we are getting the below error.
Following files are active :
E:oracleproduct10.2.0inoraclient10.dll
E:oracleproduct10.2.0inorapls10.dll
E:oracleproduct10.2.0inoracommon10.dll
E:oracleproduct10.2.0inorageneric10.dll
E:oracleproduct10.2.0inoraplp10.dll
[code]........
--------------------------------------------------------------------------------
The following warnings have occurred during OPatch execution:
1) OUI-67620:Interim patch 10349197 is a superset of the patch(es) [ 8559466 ]
in the Oracle Home
--------------------------------------------------------------------------------
Its not an rac. We stopped all the services running on this server.
OPatch failed with error code = 74
View 4 Replies
View Related
Aug 18, 2013
Database = 11.2.0.3.0
Operating System : Solaris 11 sparc 64.
applying PSU patch : 16619892
I am trying to apply patch 16619892 on 11.2.0.3.0 to upgrade it to 11.2.0.3.7.
I hope this is a straight forword stuff i beleive, but i am getting the following errors and log details.
$ cd /noracle/patch/16619892/
xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
[Code].....
View 8 Replies
View Related
May 23, 2012
Just to confirm with you if we can apply the October 2011 Critical Patch Update (CPU) to address vulnerabilities covered from CPU 2007 up to CPU 2011?
The PC Server (staging) where patching will be applied is running under Windows Vista have not been patched since it's database creation. This is maintained by our Contractors.
View 2 Replies
View Related
Jan 24, 2012
I am reffering to one off patch "10402264" .I have to apply tihs patch to my 11.2.0.2.4 database.Is there any chart oracle provide to check if 10402264 is covered in any PSUs? or i have to go to each PSU readme and check "Bugs fixed" ?
i wish i could get somthing like this
11.2.0.2 One-off# PSU4 PSU5 11.2.0.3.0
10402264 NO YES YES
Or any other best practive
View 1 Replies
View Related
Aug 19, 2010
We're thinking of moving from 10.2.0.3 to 10.2.0.5 in our production Oracle RAC. The 10.2.0.5 patch is quite new and I was wondering if any of you have upgraded to this patch in any of your environments and if you experienced any issues afterwards?
View 2 Replies
View Related
Sep 12, 2011
I installed oracle 11.2.0.2 RAC and want to apply the PSU patch. I would like to know whether its better to apply the April 2011 PSU or July release.
View 1 Replies
View Related
Oct 27, 2011
where i can download the patch documentation. Is it available in the metalink (my oracle support)? if yes then is there any other way i can get hold of it?
View 6 Replies
View Related
Nov 22, 2010
I want to upgrade 10.2.0.1 to 10.2.0.5.
Can I straightly apply 10.2.0.5 or need to sequentially apply one by one?
View 2 Replies
View Related
Mar 25, 2010
can we apply 11.1.0.7 Patch Set on a 10.2.0.3 database server? i mean are patch sets cumulative or do i have to install the patch specific to my release the issue is i have the below error with rman: RMAN-03009: failure of delete command on ORA_DISK_1 channel at ORA-19633: control file record is out of sync with recovery catalog
View 7 Replies
View Related
Jan 31, 2011
I am using Oracle 11g (11.2.0.1.0) and I want to apply January patch on 11.2.0.1.0. I have applied 3 patches. I have single Instance with ASM and Grid.
Grid home: /opt/grid/11.2.0/grid
Oracle Home: /opt/oracle/product/11.2.0/db
1. O patch (6880880)
2. Grid patch (9655006)
3. Oracle Patch (10248516)
I have followed the following steps.
1. Applied Opatch on grid.
unzip p6880880_112000_LINUX.zip -d /opt/grid/11.2.0/grid
2. Validated the Oracle Inventory.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory -detail -oh /opt/grid/11.2.0/grid
3. Shut down the databases.
4. Run the prepatch script
./9655006/custom/server/9655006/custom/scripts/prepatch.sh
5. Shutdown the ASM.
6. Ran the below command to stop CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -unlock
7. Applied grid patch.
/opt/grid/11.2.0/grid/OPatch/opatch napply -oh /opt/grid/11.2.0/grid -id 9655006
8. Applied Opatch on Oracle home
9. Applied Oracle patch
/opt/oracle/product/11.2.0/db/OPatch/opatch napply -oh /opt/oracle/product/11.2.0/db -id 10248516
8. Run the postpatch script
./9655006/custom/server/9655006/custom/scripts/postpatch.sh
9. Run the following script to enable CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -patch
/opt/grid/11.2.0/grid/bin/crsctl check has
/opt/grid/11.2.0/grid/bin/crsctl check css
10. If CSS is not online ran the below command.
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.cssd" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.diskmon" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl stop has
/opt/grid/11.2.0/grid/bin/crsctl start has
11. Up the ASM and Databases. Ran the postinstall in GRID and Oracle.
@catbundle.sql psu apply
12. Ran the below command on grid and Oracle.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory
/opt/oracle/product/11.2.0/db/OPatch/opatch lsinventory
1. Let me know steps which are followed are right because I didnot see the version change after connecting to database? (for example 11.2.0.1.0 after applying I can see 11.2.0.1.4 but not changed the version). How should I know the patch is applied properly?
2. Is the above steps are applicable to HA setup.
View 7 Replies
View Related
Feb 10, 2009
I applied the Jan 09 CPU to my database this past Saturday and now my daily schema export is not running properly:
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsExport done in WE8MSWIN1252 character set and UTF8 NCHAR character set server uses UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TEST
. exporting PUBLIC type synonyms
. exporting private type synonyms
[code]...
View 8 Replies
View Related
Feb 18, 2010
I am running a 10g oracle DB on AIX the application running is SAP.
Now I will be applying the following patch
8201796:OPTIMIZER MERGE LABEL REQUEST ON TOP OF 10.2.0.4 FOR SAP (#10)
But I find the following patches are already applied to the system which happens to be included in 8201796
6934892,7228971,7278117.
Do i need to remove the above patches individually before applying 8201796 or will it automatically do the needful during installation.
View 4 Replies
View Related
Jan 16, 2011
I have installed grid and oracle 11g on linux environment. I want to installation January patch related to grid and oracle 11g. This is the first time i m going to install the oracle 11g.
View 4 Replies
View Related
Mar 14, 2012
How to set Path environment variable if we want to use OPatch utility for patch upgradation.
View 2 Replies
View Related
Feb 23, 2010
How do i find out the information regarding the latest patch installed for ORACLE_HOME..
OR
If given a patch number, how do i find out whether it's applied to ORACLE_HOME
View 1 Replies
View Related
Jul 20, 2012
We need to apply the the 11.2.0.2 database server patch and this is a 12i Ebusiness suite env. Do we need to take any precautions(other than stopping the apps) on the APPS side when we are applying the patch on the database?
View 2 Replies
View Related
Apr 28, 2011
I have HP server with Windows 2008 Server R2 64bit. I installed latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes after about 15 minutes - an additional log file is changed to the binary version which do not see anything.
how to solve problem? The move to Oracle 11 drops.
This is the link to my alert log file (it's strange after 10.2.0.5 patch installation):
[URL].......
I attached my spfile.ora file too:
[URL].......
View 1 Replies
View Related
Nov 27, 2012
I want to apply patch 13 to 11.2.0.3 database for windows server 2008 R2. I saw the pre requisites and found that opatch should be 11.2.0.1.9 or later. My optach is 11.2.0.1.7. I downloaded the patch # 11846294 and unzipped under the opatch directory. In one of the step it asked me to run the following command
$ORACLE_HOME/OPatch/oplan/oplan generateApplySteps <bundle patch location>
but then it says oplan is not recognized. I have set the Oracle_home and path variable
my path is C:Oraclegrid_homein;C:Oracledbhome_1in;C:Oraclegridin;%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;%SYSTEMROOT%System32WindowsPowerShellv1.0;C:Program FilesArcGISArcSDEora11gexein;C:Program FilesXIVhost_attachin;C:Oracledbhome_1oplan
Note that my database version is 11.2.0.3 with ASM
View 7 Replies
View Related
Jan 20, 2011
I need some detail information regarding the CPM Patches released by oracle quarterly.
Is it compulsory to set the CPM patch when it is being realized. How to set or apply this patch. (either by runInstaller or OPatch utility i am not sure about this)
What is the difference between the interim & CPM patches.
View 3 Replies
View Related
Oct 20, 2012
I have the following query. The problem is that in case of dense_rank it gives wrong result when there is multi sort involved,So lets say if following data i get from inner query before applying dense_rank
Seq_uid Status Salary Pre_sort_col
1 A 4 A
1 A 3 A
2 B 5 B
3 A 0 A
After dense_rank when ordering by pre_sort_col desc and seq_uid desc the result set is
Seq_uid Status Salary ROW_NUM pre_sort_col
3 A 0 1 A
1 A 4 3 A
1 A 3 3 A
2 B 5 2 B
which is wrong as seq_uid 3 shld nt come first. I cant have salary in dense rank as these are dynamic columns,if on 3 columns multi sort is selected,the first column will come in pre_sort_col, SEq_uid has to be used as to distinguish from other records which get same pre_sort_col
SELECT c.ROW_NUM, c.RECORD_TOTAL, VW.*
FROM (SELECT distinct seq_uid,ROW_NUM,RECORD_TOTAL
FROM (SELECT dense_rank(order by pre_sort_col desc,seq_uid desc)row_num,a.*
FROM (SELECT COUNT(DISTINCT V1.seq_uid) OVER() RECORD_TOTAL,
[code]....
View 2 Replies
View Related
Aug 1, 2013
I am able to assign a user to a user group using the User Admin in Apex.I don't know how I would be able to assign a role (that I know how to define that for an individual user).The only thing I can see is a name for User Group and a Description! My requirement is to define a group of people to be assigned to one group/role, so that every change to that role can be automatically be applied to each user in that group
View 1 Replies
View Related
Sep 3, 2010
ORACLE VERSION: 11.2
ENVIRONMENT: physical standby database
MODE: maximum performance mode.
SQL> select * from v$archive_gap;
no rows selected
SQL> select sequence#, applied from v$archived_log where applied='NO';
SEQUENCE# APPLIED
---------- ---------
10929 NO
10930 NO
10931 NO
10932 NO
10933 NO
10934 NO
10935 NO
10936 NO
10937 NO
11073 NO
11074 NO
SEQUENCE# APPLIED
---------- ---------
11075 NO
11076 NO
11077 NO
11078 NO
11079 NO
11080 NO
11081 NO
11082 NO
11083 NO
11084 NO
11085 NO
SEQUENCE# APPLIED
---------- ---------
11086 NO
11087 NO
11088 NO
11089 NO
11091 NO
11092 NO
What would be the cause
View 1 Replies
View Related
Apr 21, 2011
I have got a form in tabular format. each record contains some specific colour or it may not contain.
i want to chage the backgroud colour of that record based on what so ever user wants. for example, user want first record should be of RED back groud, second green, third blue etc.
colours are available in RGB format.
when i try to set_item_property(backgroundcolor) on post-query or on when new item instance, it makes all record of same colour.
note:- if a put another text/display item and make it number of record displayed property = 1 , then it works, because only one record colour is seen at a time.
I can not use multiple visual attributes because number of colours are up to user feedback.
how can it be applied in tabular format?
View 3 Replies
View Related
Mar 16, 2011
We are trying eliminate/minimize the downtime for our application. As part of new code deployments sometimes we need to modify DB Structure also. As it is taking time to backup current DB and apply new DDL, the application is down.
Is there a way to eliminate the downtime, if I can leverage Data Guard, Golden Gate or RAC concepts?
View 3 Replies
View Related
Sep 5, 2013
We have a 11r2 primary and standby running on RHEL 5. The primary lost network connectivity for a time and VMWare locked up. The VM admin restarted the primary VM (it was a hard-boot). This all happened while I was gone and when I came into work, the primary database appeared to be working. I decided to dig deeper and check out the standby. On the standby...
SQL> select * from v$archive_gap;
Thread#: 1
low_sequence: 123120
high_sequence: 123120
[Code]...
It appears all is well (just very far behind) but when I run the last code block (show database prodDB2;) again ...
DGMGRL> show database prodDB2;
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Apply Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Real Time Query: OFF
Instance(s): prodDB
it looks as if the massive backlog is just increasing. How can I confirm that everything that things are going well? I am still learning Data Guard.
View 8 Replies
View Related
Aug 15, 2012
I create following update conflict handlers, one after other. These are working correctly, my problem is when i create 2nd it replace first one, and when i create 3rd one it replace 2nd one. I want to put all three in action simultaneously. How can i do this.
{code}DECLAREcols DBMS_UTILITY.NAME_ARRAY;BEGINcols(1) := 'MODIFIED_DATE';cols(2) := 'MODIFIED_BY';cols(3) := 'RATE_CHANGE_DATE';cols(4) := 'PENSION_AMOUNT';cols(5) := 'EASYPAISA_WORK_ON';cols(6) := 'PPO_NO';cols(7) := 'NEW_NIC_NO'; cols(8) := 'OLD_NIC_NO';cols(9) := 'CLAIM_NO';DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(object_name => 'CORE_BUSINESS.CB_PENSIONER',method_name => 'OVERWRITE',resolution_column => 'CLAIM_NO',column_list => cols);END;{code} {code}DECLAREcols DBMS_UTILITY.NAME_ARRAY;BEGINcols(1) := 'MODIFIED_DATE';cols(2) := 'MODIFIED_BY';cols(3) := 'RATE_CHANGE_DATE';cols(4) := 'PENSION_AMOUNT';cols(5) := 'CLAIM_NO';DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(object_name =>
[code]....
View 3 Replies
View Related
Mar 18, 2011
Im applying patch which is an upgrade to 10.2.0.5 from 10.2.0.3. Its a 2 node RAC. While applying patches the installer mentioned space are sufficient, but while applying patches it throws message that in oracle home space not sufficient. Im able to apply patches in cluster home successfully. How much space required in oracle home for this patch? There is no information mentioned the document as well.
View 2 Replies
View Related
Sep 5, 2011
I have form with master detail relation ship (invoicing form) the detail block is tabular, displaying upto 7 records...
Now my clients wants to show the serial number along with each record while feeding the data (this includes when insert, editing, deleting / clearing records) he wants to see the serial number as in MS access / MS techniques.
I tried to use the system variable to use :system.cursor_record; but this dose not works.(in insert/edit/delete/clear record)
View 5 Replies
View Related
Sep 19, 2013
My Database version as followsOracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64biPL/SQL Release 10.2.0.4.0 - ProductionCORE 10.2.0.4.0 ProductionTNS for Linux: Version 10.2.0.4.0 - ProductionNLSRTL Version 10.2.0.4.0 - Production We have datagaurd setup as well - Huge archive logs are generating in our primary database - Archive logs are shipping to standby with no dealy - But applying the archive logs are taking more in our physical standby database -why it was taking more time to apply archivlogs (sync) in standby ? - What could be possible reasons..? Note : Size of standby redo logs are same as redo log file of primary database - Also standby by redo one or more than online redo log primary. Since i need to report my higer leve stating this is cause for delay in applying archive logs.
View 32 Replies
View Related
