Just to confirm with you if we can apply the October 2011 Critical Patch Update (CPU) to address vulnerabilities covered from CPU 2007 up to CPU 2011?
The PC Server (staging) where patching will be applied is running under Windows Vista have not been patched since it's database creation. This is maintained by our Contractors.
Is this the correct forum to ask questions about Oracle CPU's?
I ran the CPU-JUL-2012 on a workstation for version 11.1.0.7, got Return Code 0 and "OPatch Succeeded".
Yet a Retina scan ran after shows no change....?
I've tried reading the availability document, but I have no experience at Oracle patching.
identify the latest Critical Patch Update for 10g RAC. My DB server is 10g RAC 2 node cluster running on IBM Aix Pseries servers. The version is 10.2.0.3.
View 1 Replies View RelatedI need to apply this Critical Patch in my databases but I have a doubt about if the component that I find out in the documentation is the component where the fix has to be applied or doesn't matter and I have to apply this fix on all my installations.
CVE# Component
CVE-2012-1740 - Oracle Application Express Listener
CVE-2011-3192 - Apache
CVE-2012-1737 - Enterprise Manager for Oracle Database
CVE-2012-1745 - The vulnerability affects Microsoft Windows platforms only.
CVE-2012-1746 - The vulnerability affects Microsoft Windows platforms only.
CVE-2012-1747 - The vulnerability affects Microsoft Windows platforms only.
CVE-2012-3134 - The vulnerability affects Microsoft Windows platforms only.
CVE-2011-4885 - PHP
Database = 11.2.0.3.0
Operating System : Solaris 11 sparc 64.
applying PSU patch : 16619892
I am trying to apply patch 16619892 on 11.2.0.3.0 to upgrade it to 11.2.0.3.7.
I hope this is a straight forword stuff i beleive, but i am getting the following errors and log details.
$ cd /noracle/patch/16619892/
xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
[Code].....
I need some detail information regarding the CPM Patches released by oracle quarterly.
Is it compulsory to set the CPM patch when it is being realized. How to set or apply this patch. (either by runInstaller or OPatch utility i am not sure about this)
What is the difference between the interim & CPM patches.
This is 2 node RAC database. Usually every month my system admin was applying OS critical patch then reboot the server.
While doing this activity i have stop all CRS and DB services. As usual i have did same in both the nodes and applied the patch and reboot the server.
After tried to start the CRS service and database services was used the following command. Except node1 instances all services are started.
E:oraclecrsproduct11.1.0crsBIN>crs_Stat -t
Name Type Target State Host
------------------------------------------------------------
ora....main.db application ONLINE ONLINE inf-...b-03
ora....n1.inst application ONLINE OFFLINE
ora....n2.inst application ONLINE ONLINE inf-...b-04
ora....SM1.asm application ONLINE ONLINE inf-...b-03
[code].....
Then i have tried to applied to old ocr backup also, then also i am getting same error.
I installed Oracle 10.2.0.1.0 in RH Linux 4.5. After that applied patch for 10.2.0.4.0. Everything went smoothly, but at the last steps I unknowingly clicked next button. I dont know whether some scripts is to be run as I did during installation of 10.1.0.4.0. If it is to be done I didn't do that.
How can I proceed now? If some scripts to be run where is the location? Will it cause any issue if I running it after completing the update?
We are applying PSU JAN 2011 patch 10349197 on windows server 2007. While applying the patch we are getting the below error.
Following files are active :
E:oracleproduct10.2.0inoraclient10.dll
E:oracleproduct10.2.0inorapls10.dll
E:oracleproduct10.2.0inoracommon10.dll
E:oracleproduct10.2.0inorageneric10.dll
E:oracleproduct10.2.0inoraplp10.dll
[code]........
--------------------------------------------------------------------------------
The following warnings have occurred during OPatch execution:
1) OUI-67620:Interim patch 10349197 is a superset of the patch(es) [ 8559466 ]
in the Oracle Home
--------------------------------------------------------------------------------
Its not an rac. We stopped all the services running on this server.
OPatch failed with error code = 74
Quote:Every patch or patch set also has a patch number to identify it
All patch and patch set releases carry version numbers.
For ex : Oracle 10g Release 10.2.0.1, then an available patch set might be 10.2.0.2 , .... , 10.2.4.0 , 10.2.5.0
My QUES is : How can i identify Patch no ? How it is differ from patchsets no ?..
How can i get latest patch official document links ?
ex : cpu , psu ,spu , Patchsets ,patch , Patchbundles , etc ..
(I don't have access METALINK)
Once i get Official doc id or weblinks , i will get it via my leads ..
Tried restarting OracaleDBConsole service after a Windows security patch was installed and now I'm getting error 1053:The service did not respond to the start or control request in a timely fashion" error message when you stop or pause a managed Windows service.
Apparently it was a MS known issue and it has been fixed in .NET v1.1 which is what was installed(& I didn't have any problems) before server team installed the latest security update which was .NET v2.0
I installed oracle 11.2.0.2 RAC and want to apply the PSU patch. I would like to know whether its better to apply the April 2011 PSU or July release.
View 1 Replies View RelatedWhere to take and how to find the latest versions of patches GI Patch Set Update for Windows?
For a DB there is article "*ALERT: Oracle 11g Release 2 (11.2) Support Status and Alerts [ID 880782.1]*". I am signed on notification messages by mail. When article *880782.1* changes, to me the notification message comes. From *880782.1* it is possible to pass in article "*Oracle Database, Networking and Grid Agent Patches for Microsoft Platforms [ID 161549.1]*". Here there are links to the latest versions of patches.
The latest versions for GI Patch Set Update it is possible to look in article "*Oracle Recommended Patches - Oracle Database [ID 756671.1]*" but here is not present Windows platform.
1). Where to take and how to find the latest versions of patches GI Patch Set Update for Windows?
2). Whether It is possible GI Patch Set Update for Windows to find by means of searching on tab MOS "*Patches & Updates*"?
I am using 'Novell Sentinel Log Manager' to collect/fetch logs from my Oracle 11g R2.To enable auditing, first I did following:
login as sys, then
SQL> create user testuser identified by "testuser";
SQL> grant connect to testuser
SQL> grant dba to sharf
SQL> grant CREATE SESSION to testuser;
SQL> grant select on v_$session to testuser;
SQL> grant select on v_$version to testuser;
SQL> grant select on SYS.DBA_AUDIT_TRAIL to testuser;
SQL> grant select_catalog_role to testuser;
SQL> grant select any dictionary to testuser;
Now logon/logof of user 'testuser' are logged , as well as if testuser drops a table or creates a table, its also logged . but when 'testuser' insert a new record, this information does not logged ;( while I need to know exactly what was added SQL> insert into emp (empid, name, salary) values (10002, 'Ron', 6000)
likewise if 'testuser' modify/update an existing record it also does not logged.
SQL> update emp set salary=700 where empid=10001;
which sql statements I have to execute to start auditing 'insert' and 'update', so that I know what was added/inserted and exactly what was updated/ changed/modify by user 'testuser'.
1)I have created a complex view, and created an instead of trigger on this view
example:
create or replace trigger tr_x instead of before update on test_view_name for each row
-------
2) I have created an update policy on this view
DBMS_RLS.ADD_POLICY (
object_schema := schema_name,
object_name := name of the view,
policy_name := ploicy name,
function_schema := func schema name,
policy_function := pkg_test.fn_get_where,
statement_types := 'UPDATE',
update_check := TRUE,
policy_type := dbms_rls.dynamic);
3) function pkg_test.fn_get_where, which is used in the policy function always return 1 = 2, so that update should fail.
4) Now I will issue an update statement on the view test_view_name
update test_view_name set test_col = 1;
but still it updates the records, though update policy returns the where cluse 1 = 2
same where clause for select policy works perfectly fine.
I want download latest critical patches of 11.1.0.7.0, 11.1.0.6.0. how can i download
View 1 Replies View RelatedWe have a critical application batch that runs daily and had a 7.5 hr window after which the application needs to come online. During the peak batch times the truncates are running very slow leading to slow down of the batch jobs quite considerably due to which the batch is going beyond the window.
Technical details:
Database version: 11.2.0.2
OS: HP-UX 11.31
The wait events that show up when the truncates are running are local write wait
enq: RO fast object reuse
enq: CR block range reuse ckpt
db file parallel write
The ASH reports show that the top sessions are those executing DMLs(insert, merge, update) and DDLs(Create/alter index & truncate). In addition to this it also shows that the blocking sessions are background wait events: CKPT and DBWR. Changes to DB configuration done with respect to addressing these issues are:
1) We have increased the DBWR processes to 2
2) Reduced the buffer cache size to 20G(from the original 30G)
3) Flushing the buffer cache before the batch begins in order to reduce the load on DBWR during the batch peak time
4) Set the parameter filessytem_io to SETALL(from none)
5) Tuned the EVA(SAN storage) to improve its performance - by distributing the loads evenly between the controllers, reducing the IO transfer block size, etc
6) Suggested using the reuse storage clause to improve truncate performance.
All of these have worked bring a semblance of control but the fact remains that the batch is generating more jobs(hence increasing data volume) over time due to it being the peak season. This causes an inevitable increase in the number of sessions all running DMLs and DDLs which are IO intensive operations.
Suggestions pending from our end:
1) Increase DBWR beyond 2. For this we need a H/W upgrade since we have maxed out the maximum number of DBWR that can be configured
2) Implementing asynchronous IO for DBWR which on HP-UX requires moving to raw disks. Hence have suggested using ASM.
3) Tuning the application to either reduce the IO generated or redistribute the jobs such that those with maximum loads don't run together
instead of truncating tables, can we rename the tables and delete them later . will this improve performance ?
I have the following query. The problem is that in case of dense_rank it gives wrong result when there is multi sort involved,So lets say if following data i get from inner query before applying dense_rank
Seq_uid Status Salary Pre_sort_col
1 A 4 A
1 A 3 A
2 B 5 B
3 A 0 A
After dense_rank when ordering by pre_sort_col desc and seq_uid desc the result set is
Seq_uid Status Salary ROW_NUM pre_sort_col
3 A 0 1 A
1 A 4 3 A
1 A 3 3 A
2 B 5 2 B
which is wrong as seq_uid 3 shld nt come first. I cant have salary in dense rank as these are dynamic columns,if on 3 columns multi sort is selected,the first column will come in pre_sort_col, SEq_uid has to be used as to distinguish from other records which get same pre_sort_col
SELECT c.ROW_NUM, c.RECORD_TOTAL, VW.*
FROM (SELECT distinct seq_uid,ROW_NUM,RECORD_TOTAL
FROM (SELECT dense_rank(order by pre_sort_col desc,seq_uid desc)row_num,a.*
FROM (SELECT COUNT(DISTINCT V1.seq_uid) OVER() RECORD_TOTAL,
[code]....
I am able to assign a user to a user group using the User Admin in Apex.I don't know how I would be able to assign a role (that I know how to define that for an individual user).The only thing I can see is a name for User Group and a Description! My requirement is to define a group of people to be assigned to one group/role, so that every change to that role can be automatically be applied to each user in that group
View 1 Replies View RelatedORACLE VERSION: 11.2
ENVIRONMENT: physical standby database
MODE: maximum performance mode.
SQL> select * from v$archive_gap;
no rows selected
SQL> select sequence#, applied from v$archived_log where applied='NO';
SEQUENCE# APPLIED
---------- ---------
10929 NO
10930 NO
10931 NO
10932 NO
10933 NO
10934 NO
10935 NO
10936 NO
10937 NO
11073 NO
11074 NO
SEQUENCE# APPLIED
---------- ---------
11075 NO
11076 NO
11077 NO
11078 NO
11079 NO
11080 NO
11081 NO
11082 NO
11083 NO
11084 NO
11085 NO
SEQUENCE# APPLIED
---------- ---------
11086 NO
11087 NO
11088 NO
11089 NO
11091 NO
11092 NO
What would be the cause
I have got a form in tabular format. each record contains some specific colour or it may not contain.
i want to chage the backgroud colour of that record based on what so ever user wants. for example, user want first record should be of RED back groud, second green, third blue etc.
colours are available in RGB format.
when i try to set_item_property(backgroundcolor) on post-query or on when new item instance, it makes all record of same colour.
note:- if a put another text/display item and make it number of record displayed property = 1 , then it works, because only one record colour is seen at a time.
I can not use multiple visual attributes because number of colours are up to user feedback.
how can it be applied in tabular format?
We are trying eliminate/minimize the downtime for our application. As part of new code deployments sometimes we need to modify DB Structure also. As it is taking time to backup current DB and apply new DDL, the application is down.
Is there a way to eliminate the downtime, if I can leverage Data Guard, Golden Gate or RAC concepts?
We have a 11r2 primary and standby running on RHEL 5. The primary lost network connectivity for a time and VMWare locked up. The VM admin restarted the primary VM (it was a hard-boot). This all happened while I was gone and when I came into work, the primary database appeared to be working. I decided to dig deeper and check out the standby. On the standby...
SQL> select * from v$archive_gap;
Thread#: 1
low_sequence: 123120
high_sequence: 123120
[Code]...
It appears all is well (just very far behind) but when I run the last code block (show database prodDB2;) again ...
DGMGRL> show database prodDB2;
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Apply Lag: 2 days 1 hour(s) 42 minutes 37 seconds
Real Time Query: OFF
Instance(s): prodDB
it looks as if the massive backlog is just increasing. How can I confirm that everything that things are going well? I am still learning Data Guard.
I create following update conflict handlers, one after other. These are working correctly, my problem is when i create 2nd it replace first one, and when i create 3rd one it replace 2nd one. I want to put all three in action simultaneously. How can i do this.
{code}DECLAREcols DBMS_UTILITY.NAME_ARRAY;BEGINcols(1) := 'MODIFIED_DATE';cols(2) := 'MODIFIED_BY';cols(3) := 'RATE_CHANGE_DATE';cols(4) := 'PENSION_AMOUNT';cols(5) := 'EASYPAISA_WORK_ON';cols(6) := 'PPO_NO';cols(7) := 'NEW_NIC_NO'; cols(8) := 'OLD_NIC_NO';cols(9) := 'CLAIM_NO';DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(object_name => 'CORE_BUSINESS.CB_PENSIONER',method_name => 'OVERWRITE',resolution_column => 'CLAIM_NO',column_list => cols);END;{code} {code}DECLAREcols DBMS_UTILITY.NAME_ARRAY;BEGINcols(1) := 'MODIFIED_DATE';cols(2) := 'MODIFIED_BY';cols(3) := 'RATE_CHANGE_DATE';cols(4) := 'PENSION_AMOUNT';cols(5) := 'CLAIM_NO';DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(object_name =>
[code]....
Im applying patch which is an upgrade to 10.2.0.5 from 10.2.0.3. Its a 2 node RAC. While applying patches the installer mentioned space are sufficient, but while applying patches it throws message that in oracle home space not sufficient. Im able to apply patches in cluster home successfully. How much space required in oracle home for this patch? There is no information mentioned the document as well.
View 2 Replies View RelatedI have form with master detail relation ship (invoicing form) the detail block is tabular, displaying upto 7 records...
Now my clients wants to show the serial number along with each record while feeding the data (this includes when insert, editing, deleting / clearing records) he wants to see the serial number as in MS access / MS techniques.
I tried to use the system variable to use :system.cursor_record; but this dose not works.(in insert/edit/delete/clear record)
My Database version as followsOracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64biPL/SQL Release 10.2.0.4.0 - ProductionCORE 10.2.0.4.0 ProductionTNS for Linux: Version 10.2.0.4.0 - ProductionNLSRTL Version 10.2.0.4.0 - Production We have datagaurd setup as well - Huge archive logs are generating in our primary database - Archive logs are shipping to standby with no dealy - But applying the archive logs are taking more in our physical standby database -why it was taking more time to apply archivlogs (sync) in standby ? - What could be possible reasons..? Note : Size of standby redo logs are same as redo log file of primary database - Also standby by redo one or more than online redo log primary. Since i need to report my higer leve stating this is cause for delay in applying archive logs.
View 32 Replies View RelatedI have few reports that I want to have totals at the bottom of the report.
Is there any way I could apply totals to all columns without doing it one by one?
I have a Primary database and Standby database both in ASM. Recently my archive logs got deleted and i am trying to recover my standby database with an incremental backup based on scn from primary database. But i face the below error when i recover the standby database with the incremental backup taken in primary database.
RMAN> recover database noredo;Starting recover at 06-NOV-13using target database control file instead of recovery catalogallocated channel: ORA_DISK_1channel ORA_DISK_1: SID=21 device type=DISKchannel ORA_DISK_1: starting incremental datafile backup set restorechannel ORA_DISK_1: specifying datafile(s) to restore from backup setdestination for restore of datafile 00001: +STDBY/11gdb/datafile/system.258.805921881destination for restore of datafile 00002: +STDBY/11gdb/datafile/sysaux.259.805921967destination for restore of datafile 00003: +STDBY/11gdb/datafile/undotbs1.260.805922023destination for restore of datafile 00004: +STDBY/11gdb/datafile
[code]....