I applied this patch in our development environment. After validation, I need to apply the same in production, training and publication environments. The detailed information follows :
PowerPC_POWER5 / aix 5300-12
OPatch utility used : 11.2.0.3.0
OUI version : 11.2.0.2.0
Prereq "checkConflictAgainstOHWithDetail" passed.
Composite patch 13923804 successfully applied.
OPatch Session completed with warnings.
I have compiled some procedures, at the time of compilation i saw some warnings & errors but i did not notice, Now can we see that errors or warnings in db console or any other way.
I've compiled a package with warnings ON. Getting message SP2-0809: Package Body Created with Compilation Errors.When I checked the errors by issuing "Show Errors", it shows "No error".
SQL> ALTER PACKAGE PKG_ABC COMPILE PLSQL_WARNINGS = 'ENABLE:ALL'; SP2-0809: Package Body Created with Compilation Errors SQL> SHOW ERRORS No Errors
how to check errors for that, or oracle simply pointing that package might have performance issue.
Every quarterly, we export the data from DEEXTRA and import into INEXTRA user.This is not working after i made the changes 2 tables and views in DEEXTRA .
I added new columns to 2 tables and associated 2 views. After this change, my import process got failed, with message especially for those views. "IMP-00041: Warning: object created with compilation warnings"
before i change the tables, import process was working fine. My doubt is, views were created in INEXTRA before the tables in import functionality.
I had given the grants similary the other objects. I belive no problems with privilages.
Because of table changes the order of the objects in exporting got disturbed? like in the exporting functionality first views created then the table?or the order of the objects in importing got disturbed? like first views created and then tables?
Export: Release 10.2.0.3.0 - Production on Thu Dec 6 15:06:21 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.3.0 - Production Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
EXP-00010: DISTESTA is not a valid username Export terminated successfully with warnings.
C:Documents and SettingsAdministrator>
When i connect from sqlplus, it doesn't give any erro. What could be the reason?
I could see in teh log lot of IMP-00041: Warning: object created with compilation warnings
example: IMP-00041: Warning: object created with compilation warnings "CREATE FORCE VIEW "ARADMIN"."BMC_CORE_BMC_IMPACT" (" ""REQUESTID","SUBMITTER","CREATEDATE","ASSIGNEDTO","LASTMODIFIEDBY","MODIFIE" "DDATE","STATUS","SHORTDESCRIPTION","CMDBROWLEVELSECURITY","INSTANCEID","CMD"
I have applied offline patch *10417948* on my database. How can see that patch applied on database/OH or not? I have applied one online patch few months ago....in that i have applied that patch on each database after installing it...using command :
when i execute a command opatch lsinventory -details i got the following output :
+Interim patches (2) :
Patch 10417948 : applied on Sat Feb 23 13:42:49 IST 2013 Unique Patch ID: 14586154 Created on 18 Oct 2012, 06:52:32 hrs PST8PDT Bugs fixed: 10417948 [code].......
For offline patch is it required to enable patch on every database?
I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
Why showing at the status bar "3 records applied and saved" instated of "2 records applied and saved". 2 means 1 for Header and 1 for Detail. How I change status bar.
We recently configured data guard in test machine.Archives not applied in physical standby.Where i need to start investigation?
Primary SQL> select THREAD#,max(sequence#) from v$archived_log where applied='YES' group by thread#; THREAD# MAX(SEQUENCE#) ---------- -------------- 1 301 [code]...
How will you find out the list of patches applied to Oracle Database Home without using commands like opatch lsinventory -detal etc...
I think registry$history is a view from where we can find out the list of patches applied.
But I think it will not include all the bug fixes,stand alone or one-off patches.It will mainly list out the CPU patches applied(correct me if I am wrong).
I need to create a table which contains the details of what companies a specific seeker applied to when he logs in into his account.... Also, when an employer logs in, he needs to get the list of seekers who applied to him...give database schema required for such a situation asap.Say, the user has a primary key UID, and each employer has a primary key EID..
I got a database on dataguard and my primary (db1) is shipping files to my standby (db2) with no problems.However, when I query:
select sequence#, status, applied from v$archived_log;
I see this: SEQUENCE# S APP ---------- - --- 4 A YES 5 A YES 6 A YES 7 A YES 8 A YES 9 A YES 10 A YES 11 A YES 12 A YES 13 A YES 14 A YES [code]....
So I did an alter system switch logfile on db1 then looked again and I can see new archived logs being applied.I thought all archived logs had to be applied on the standby since this is the very foundation of the standby database.Am I going to run in trouble later if I have a failover (unsynchronized database)
I have created a physical standby database and in it the logs are not getting applied.following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012 Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc Attempting refetch Media Recovery Waiting for thread 1 sequence 37638 Fetching gap sequence in thread 1, gap sequence 37638-37643 Wed Sep 05 07:53:59 2012 RFS[46]: Assigned to RFS process 3081 RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638 RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228 Wed Sep 05 07:55:34 2012 RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.I tried registering and recovering the logs but it also failed..Follows some of the information,
Primary Oralce 11R2 EE SQL> select max(sequence#) from v$log where archived='YES'; MAX(SEQUENCE#) -------------- 37668 [code]...
Currently I am at the point where the configuration has been completed, and I just need to sync the standby database to the primary one. I can see in the log files that the archive logs are being shipped, but they are not applied on the standby system.
If I run "recover standby database;" manually in sqlplus I can see that it is trying to apply an archive log which is way too old (ORA-00279: change 9656498443 generated at 04/29/2008 08:45:08 needed for thread 1). I
n the alert log I can also see this error: Warning: Recovery target destination is in a sibling branch of the controlfile checkpoint. Recovery will only recover changes to datafiles.
At this point I was thinking that the standby database might be on a different incarnation compared to the primary, but this is not the case, they are both in incarnation 6:6 6 MVF 4023175798 CURRENT 48493546257 13-06-21
Till now i was pretty sure that standby redologs are applied to database without any delay, but everything looks that the process is different. i did on primary server table and add some records to this table.
Next i switch to standby and open redologs (with hex editor) to look for this "create table" and "insert" commands. and i succeeded. so this is prove that standby log are supplied by primary database.
Next i cancelled recovery process and open database in read only mode and there was no records in this standby db, moreover there wasn't any table on standby. so i started to be confused, because i suspected that this table and it content will be on standby database.
Next i started recover process again for standby database and do some switch log on primary server. after that i back to standby, cancel recovery process and open database in read only mode. there was table and contents for it.
so my question is:
does standby redologs should be applied online to database or they are only applied after promoting standby database to primary database? it looks like contents only from archivelog is applied to standby database. it is correct?
How Can We Stop to insert Data if Master Block have the record and detail block have no record but commit command applied i want that commit command can not be work if detail block have no record
I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
How to make the automatic deletion of all the archivelogs when it is applied successfully on the standby database? We have 1 primary database and 1 standby database using oracle physical dataguard.
In the primary database, we have daily backup job so that the applied archivelogs are deleted automatically, no problem
But in the standby database ( physical standby) I have to go there and delete manually because I don't issue backup on this database. Is there any solution for this problem.
I have a Sap Primry Database and also a standby db that was working perfectly.. We migrated the primary db from windows 2003 to windows 2008 and brought the primary db up.. I had to create a controlfile and do a system copy and had to reset the logs on the Primary.. All came up and when i checked the standby it was receiving the logs but after a month. i see that it was not applying the logs as I think because of the sequence number .. it stopped.
I did the ffg as per the attachement...My logs have been shipped across but not applied, But What worrries me is the log sequence number on my Primary
SQL> select max(sequence#),thread# from gv$archived_log group by thread#;
I have a DR setup with the following configuration
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS; CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default CONFIGURE MAXSETSIZE TO UNLIMITED; # default CONFIGURE ENCRYPTION FOR DATABASE OFF; # default CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY
I dont want to backup the STDBY DB but I want the ARC files to be removed when applied so my flash area does not fill up. Is there some command(rman or not) that can fire off this policy?
I've been told by management this weekend I will be required to perform a complete patch of our Oracle 11g database.
Problem is I really have never installed / patched Oracle. I'm able to access pretty much any database here and interact with it from a SQL stand point so since I'm the only person in my entire office who knows SQL, they decided I can become their full blow DBA.
Currently the database is running a unpatched version:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
Once I download the latest patch (11.2.0.2.0) files from Oracle & perform a complete backup using RMAN:
RMAN> backup full as compressed backupset database plus archivelog;
How exactly does one properly patch / update Oracle 11g to the latest version?
ERROR: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor -------- My listener service is running. Listener.ora is: --------- # listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora # Generated by Oracle configuration tools.
Does we need to apply the patches in sequence. i installed oracle 11g r2 today only, then which patch i can install. if i like to install CPU, then does i need to install all the previous or only the latest one. if only latest one only, then how can i find the CPU patch number.
of course, instead of cpu i can install psu patch, then which one has to install. only latest one or all previous also. if latest one only how to find latest psu patch that has to apply.
