What should I do with those disabled CONSTRAINTS (most were those file starts with LOGMNR) & TRIGGERS found on our production dB? Are there any impact once I enable those?
View 2 Replies
I want to find out the columns on which primary constraints are enabled.Which view must I use to check this.
View 2 Replies View RelatedI know that you can view all constraints in a table using $USER_CONSTRAINTS or $USER_INDEXES view. What i find difficult is that the information in those views is not really well presented.
I find it very hard to follow. For example, just to find out which columns are foreign keys and which tables they refer to is really tedious. Is there a simpler way to view all the constraints especially foreign keys of a table and including which table columns they refer to in the child table.
I like to see a diagramatic representaion of all the tables involved so i like to see both the parent and the child tables, which columns are related and using which FKs etc. is there an easier way to view this information?
Is it possible to create trigger on the various tables and views exists (i.e. dynamic performance views) in data dictionary, when ever any DML operations performs by Oracle it self?
View 6 Replies View RelatedColumn Trigger_body in table user_trigger is long data type.I want to find out the certain 'table name' was using intrigger.
Below is my sql statement:
select trigger_name
from user_triggers
where TRIGGER_BODY like '%tb_test%' or TRIGGER_BODY like '%TB_TEST%';
then it show me a error :
where TRIGGER_BODY like '%tb_test%'
*
ERROR at line 3:
ORA-00932: inconsistent datatypes
I had set long 32767 before execute above statement
I am trying one simple operation on Oracle9i DB. I am exporting a table data and trying to import it back. The triggers associated with the insert operation for this table are not being fired during import. Here is the commandline i am using to achieve the same.
1) Exporting the table data.
$ORACLE_HOME/bin/exp SMS_60/SMS_60 file=callfwd.dmp tables=callFwd_customerList TRIGGERS=Y
2) Importing the same data.
$ORACLE_HOME/bin/imp SMS_60/SMS_60 file=callfwd.dmp tables=callFwd_customerList ignore=Y
Import ends with success with all the rows imported in the table but the triggers associated to this "insert" operation.
I am using Datapump import using database link to import an entire schema from another Server but it gives issues with constraints.I tried to first only import the metadata and then disable the constraints and import data and enable constraint but in this case the temp tablespace keeps filling up and i am out of space. Is there any method to do a full import including constraints and indexes.
View 7 Replies View RelatedWe need to setup a test system using data from one of the offsite customer location.The option we would like to use is impdp with network link. Below given step will make import faster if we exclude indexes and constraints
Steps
Import schema excluding constraints,rf_constraints,indexes with metadata only
Import schema with data only
spool ddl using dbms_metadata.get_ddl from Source for constraints,rf_constraints and indexes
execute on Destination the Index creation ddl
execute on Destination constraints and rf_constraints ddl
Procedures, triggers and other object with character changed.
Every character was replaced by ã? the content of procedures and other objects after importing a schema for production approval.
Example:
EXCEPTION
WHEN OTHERS THEN
p_msgerro := p_msgerro ||
' Erro na selec?o da Unidade Administrativa. ' ||
The character (?) deveria ser (ã)
How to import constraints only from a dump file using Oracle data pump.
View 1 Replies View Related i want to do a schema export from Database A. There are hundreds of users under this schema.I have to import this schema into other database say B. My question's are:
1) Do i need to pre-create only schema user or all the users under it.
2) Will the schema export all the roles,procedures,packages,synonyms,funsctions and triggers?
I want to create a store procedure to copy data from a source tables(which may not have any constraints defined) to a table which has primary key, foreign key and unique key constraints.
Any records which are rejected due to these constraints not being satisfied need to go another table.
Once the initial data load is done, these procedures need to be automated(through cron) to do the future incremental uploads in the same manner.
We have an application, using ddl database trigger on oracle database.Trigger depends on package and several tables, package depends on user defined function.It works on different customer sites well, but for one customer (11g?), sometimes (cannot determine when and why), trigger became disabled.
I know, that trigger can became invalid, when its dependencies changed (i think in this situation oralce probably try to re-compile it). I understand that it can changed to be invalidwhen dependencies are not valid.I know I can alter trigger to became disabled manually.
But when it can became disabledwithout explicit alter statement be run!? Are there some conditions / circumstance when Oracle changed the trigger to be disabled?We'll ask the customer DBA team to enable audit on trigger, but it will take time to be done..
Currently, the only way I can find of doing so is to try to disable an instance, and if it is already disabled, it warns you that its disabled. This is not exatly an ideal solution! How do I simply run a query or issue a crs command to list all disabled database instances.
View 1 Replies View RelatedOracle Enterprise Manager 11g, navigating to the Performance tab for our test database. The "SQL Performance Analyzer" link is not apparent (as is all the other links).
I checked the "setup", in particular, the Management Pack Access ... all of these have checks by them ...
Database Change Management Pack
Database Configuration Management Pack
Database Diagnostics Pack
Data Masking Pack
Database Tuning Pack
Provisioning Pack
Pack Access Agreed.
Also, checked the value of the "control_management_pack_access" which reads "DIAGNOSTIC+TUNING"
How to get the "SQL Performance Analyzer" link enabled? Apparently, according to one of my colleagues, they used it about a month ago, so I don't know what could have happened between then and now.
I am using Forms 6i in Application. In Form, After i enter the data and saved then,if i retrieve the data by using Ctrl+F11, all the fields of data block turns to be disabled (insert not allowed, update not allowed) of course i am getting the data.If i close the application, and open freshly it works good (insert allowed, update allowed).
View 1 Replies View RelatedI have Toad 9.6.1 already installed on my machine and have now installed Toad 10.6 . unfortunately the Save Passwords option on the Connection screen is disabled. how do I enable that option.
View 2 Replies View RelatedSince tablespaces can be enabled/disbaled for flashback is there a query that can tell me the flashback status of each tablespace in my DB.
View 2 Replies View RelatedI am using the below code to disable forms field in fdtlblk.mdt_rqr = 'NO'
but I can go there with mouse click ( for tab and enter it is working fine ) .
but for mouse click it is not working .
if (:fdtlblk.mdt_rqr = 'NO') then
go_item('fdtlblk.section_loss');
set_item_property('FUP_RCVD_DT',enabled,property_false);
[Code]....
Am developing a custom form. I have a block with 5 Items and one button(SUBMIT). When I go in query mode (F11), SUBMIT button to be disabled. How do i achieve this.
View 22 Replies View RelatedIs it possible to audit when a constraint is disabled, enabled or dropped? Sometimes I wonder why some constraints are missing. To make sure someone is dropping I would like to audit that action. Further, I would need to compare schemas to realize if some constraints are missing. As it names are generated automatically by oracle, how could I easily run a select to compare the constraints that does not match between schemas?
View 10 Replies View RelatedI have a problem in oracle forms. I have a block that displays five records in list item. On load, it will query two data in my table. So the list item (poplist) one and two enabled. (The default of oracle forms - List item one and two are enabled and the rest are disabled because one and two have data).
My problem was, what work around will I gonna do so that if I pressed the mouse in the third list item it will automatically enabled (for a new record) and if I pressed the list item one or two the third item will stay disable (even the fourth and fifth) because simply the user wants to update the item one or two in the list.
I have a scroll bar in my form. When i scroll the bar, one of SUBMIT buttons which is disabled gets enabled automatically. Do we have any triggers on scroll bar where i can disable the button again.
View 4 Replies View RelatedWhen I create the orapwd file the sys user is not in the file,The problem started when I tried to grant sysdba privileges to sys
[oracle@bg2mo08i3 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Thu Apr 5 18:47:06 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
SQL> grant sysdba to sys;
grant sysdba to sys
*
ERROR at line 1:
ORA-01994: GRANT failed: password file missing or disabled
SQL> shutdown immediate;
From the postings I read I shutdown the DB and I created a new orapwd file:
$ orapwd file=$ORACLE_HOME/dbs/orapwSID password=password entries=30 force=y
SQL> startup;
Started the DB, verified that the password parameter is set to EXCLUSIVE.
SQL>show parameter password;
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
remote_login_passwordfile string EXCLUSIVE
SQL>
SQL> select * from v$pwfile_users;
no rows selected
SQL>
Shouldn't the sys user be listed in the v$pwfile_users?
[oracle@bg2mo08i3 dbs]$ ls -l ora*
-rw-r----- 1 oracle oinstall 1536 Apr 5 18:02 orapwSID
Are these permissions and ownership correct?
I can connect using sys's password: SQL> connect sys/sysPASSWORD as sysdba Connected
A field named xxx_date is a text item which we have to enter manually so as to update a record in that particular date. This is a mandatory field without which we cannot continue the data entry..
I am getting this error while trying to update the record
FRM-40509 :Oracle error :unable to update record
I have kept the enabled = yes
required=no
data type=Date.. in the property pallet
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
How do know all the constraints that are present on the data in a table in oracle ??
View 2 Replies View RelatedI want to display columns along with their constraints using describe command
Is it possible?
SQL> desc dept;
Name Null? Type
----------------------------------------- -------- -------------
DEPTNO NUMBER(2)
DNAME VARCHAR2(14)
LOC VARCHAR2(13)
Basically, I need to fulfil the constraint:
"student cannot have more than 100 points"
I need to use a trigger to do this, but I don't understand how this would work.
Written in plain english I imagine it work work something like:
AFTER UPDATE
WHERE student.lessonid = lesson.lessonid
IF SUM(lesson.points) > 100 then ROLLBACK
lessonid is the only field relating the two tables.
--
How to fulfill that criteria, whether it be using triggers or not.
How to create any constraints other than NOT NULL in PLSQL RECORD.
View 5 Replies View Related
