I am using Forms 6i in Application. In Form, After i enter the data and saved then,if i retrieve the data by using Ctrl+F11, all the fields of data block turns to be disabled (insert not allowed, update not allowed) of course i am getting the data.If i close the application, and open freshly it works good (insert allowed, update allowed).
View 1 RepliesI am using the below code to disable forms field in fdtlblk.mdt_rqr = 'NO'
but I can go there with mouse click ( for tab and enter it is working fine ) .
but for mouse click it is not working .
if (:fdtlblk.mdt_rqr = 'NO') then
go_item('fdtlblk.section_loss');
set_item_property('FUP_RCVD_DT',enabled,property_false);
[Code]....
I'm trying to change the attributes on a display where the info is gathered via a routine that fills the data block with info. I've searched and tried using 'set item instance property' in several places within the data block using different triggers but still doesn't work.
No errors are encountered or shown. Attributes aren't changed based on a small test condition.
Am developing a custom form. I have a block with 5 Items and one button(SUBMIT). When I go in query mode (F11), SUBMIT button to be disabled. How do i achieve this.
View 22 Replies View RelatedI have a problem in oracle forms. I have a block that displays five records in list item. On load, it will query two data in my table. So the list item (poplist) one and two enabled. (The default of oracle forms - List item one and two are enabled and the rest are disabled because one and two have data).
My problem was, what work around will I gonna do so that if I pressed the mouse in the third list item it will automatically enabled (for a new record) and if I pressed the list item one or two the third item will stay disable (even the fourth and fifth) because simply the user wants to update the item one or two in the list.
I have a scroll bar in my form. When i scroll the bar, one of SUBMIT buttons which is disabled gets enabled automatically. Do we have any triggers on scroll bar where i can disable the button again.
View 4 Replies View Relatedi have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
i have a master detail form, In Master block we have one field cheque amount and in Detail block we have field receiveable amount invoice wise. if company paid us a cheque amount we will enter this amount in Master block field Cheque amount and in detail block there will be invoice wise receivable amounts. i want to distribute the cheque amount in detail block invoice wise for example
Cheque amount in master block = 291
Invoice wise receiveable amount is as follows
Invoice No , receivable amount , Received amount
10, 196 , 0
20 , 95 , 0
30 , 54 , 0
Result should be as follows:
Invoice No , receivable amount , Received amount
10, 196, 196
20 , 95 , 95
30 , 54, 0
Received amount field should be distributed according to the receivable amount when recevied amount = cheque amount then remaining will be 0.
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
A field named xxx_date is a text item which we have to enter manually so as to update a record in that particular date. This is a mandatory field without which we cannot continue the data entry..
I am getting this error while trying to update the record
FRM-40509 :Oracle error :unable to update record
I have kept the enabled = yes
required=no
data type=Date.. in the property pallet
I created a new form for Oracle Apps, At first when I ran the form from the application all the fields backgrounds were black, so I changed the background in the property palette to white and foreground to black.
Now it shows fine but when I close this form and open another those fields are now blacked out. What should I do, I know the problem comes from the new form.
I have a horrible problem with EBS (actually, all problems with EBS are horrible) and I think I am stuck because of my ignorance of Forms. if I use terms that are not correct in the Forms world. The form consists of a number of named "blocks" and each block consists of a number of named "fields", not all of which are visible. I need to find the source of the data values in one of these fields. I have searched every table for a column of that name, also all the views and stored PL/SQL that I think might be relevant, but I can no find no mention of a column or variable with the same name as the field. The name does not get a hit in the online EBS tech ref manual, and only two ancient and irrelevant hits in MOS.
My question is: What are the possible sources of data for a field in a form? Have I missed any?
Is there any way to see items in the block having null in them? I want to figure out null field before inserting the data in the database table. At the moment I am having an error ORA 01400 which means that a NULL cannot be inserted into NOT NULL column. So, I want to create a procedure which will fire before insert trigger of the block and it will show me the names of items having null it them.
Procedure check_data(block_name in varchar2)
First_item varchar(20);
Current_item varchar(20);
Last_item varchar(20);
Begin
[Code]..
The problem is that I don't know the function to get the value inserted by user in the field so that I can compare it in IF condition.
I am working on Oracle Apps 11i. Need Forms Personalization.
Client requirement: Selected user should only see Office Phone Number for all the people in the organization when he enters the Phones form.
Means, the client is having around 10 Lookup values for Phones (Like Mobile (Office), Mobile (Personal), Office (fax), Office No. etc). Now, they want to give access to admin, only to update the Phone numbers related to Office. So, when the admin logs-in to the phone form of a employee, that admin should not be able to see other phone numbers of that Employee.
Is it possible using Forms Personalisation?
i want to use Arabic language in one of the fields available on the form.
i alreade have done the following
1. On database
update PROPS$
set value$ ='AR8MSWIN1256'
where name = 'NLS_CHARACTERSET';
2. On system registry
Have changed all nls_lang variable in the registry to 'American_America.AR8MSWIN1256'
3. On Form
Have changed the field font to 'Simplified Arabic' and reading order 'right to left'
4. On Operating System
Change the region and language setting
format 'Arabic (saudi Arabia)'
keyboard and languages add 'Arabic (saudi arabia)'
5. have restarted the database on the server and also the client machine.
i have a emp block with multiple rows in which col1,col2,col3,col4,col5,col6 are the columns...In emp block col1,col2,col3 are the primary key fields.. i need to validate the primary key columns such that it should not allow duplicates values in the primary key col's with out checking the database values with out using enforce primary key property
View 2 Replies View RelatedIs there any possibility of creating a selection interface similar to our report or forms wizard where user can select single fields or multiple fields together and when he clicks on the arrow those fields data to be inserted into another table.Please refer attachment.
--this is the main table
create table batch_item (batch_no varchar2(12),item_batch varchar2(12),total_batch_qty number);
insert into batch_item ('0001','a',300);
insert into batch_item ('0002','b',200);
insert into batch_item ('0003','a',102);
--after inserting the data i should be able to move this data to corresponding batches by manually selection and pushing them to a batch.create table ct_item (item varchar2(12),item_nm varchar2(20),item_qty number);
insert into om_item values ('a','alpha',2);
insert into om_item values ('b','beta',3);
insert into om_item values ('c','gama',4);
--left side is om_item and right will have batch items where batch qty will be accumulated upon choose arrows.
I have an Oracle Form 6i. There are two blocks. One is a database block called CUSTOMER and the other is a non-database block called CONTROL.
In the PRE-INSERT trigger of the database block, values from the non-database table block are passed to the database table block. When I pass values I use the :BLOCK_NAME.field_name eg. :CUSTOMER.scale_code := :CONTROL.scale.
In this form the values passed to the database block from the non-database block in the PRE-INSERT trigger do not use the block name e.g. :-
:warehouse := :global.default_warehouse;
:capturer :=captured
:scale_code := scale;
:date_captured := sysdate;
insert into dd_audit(cus_id,cap_date) values(:CONTROL.cus_id,SYSDATE);
This application used to work fine for months, last week when writing the values in the PRE-INSERT trigger, just the warehouse field had a value. The remaining fields after the warehouse did not pass any values, although it was verified that values would have been present in the non-database block. The date_captured field should have at least had the system date. The last insert into dd_audit was successful.
I have done numerous tests on our test database and could not replicate the problem. Would passing the values from the non-database block to the database block without the :BLOCK_name preceding the field name cause this problem.
I developed a custom Form using Form Builder 6i. This Form has selection criteria (data to be entered in a couple of fields) and a "Find" Button, which queries the data (based on the selection criteria) and populates all fields on the Form.
This Form has a couple of "Required" fields in its search criteria section. When data is not populated in any of the Required fields and "Find" button is clicked upon, Form raises an exception and pops up a message indicating the user 'to enter data in mandatory fields'. However, this message keeps popping up and would not stop.
So, I'm not able to proceed with querying data on my custom Form. I had to kill the session and reconnect to front end to overcome this issue.
I have two different date in my payroll software,
1-Shift_date shift date *used to contain shift timings
2-Attendace_datedate *used to contain employee IN timings
As you all know that shift is a setup form, where user input data once in the starting of software so the shift_date can be "01/jan/2011 16:00 pm" but attendance loads daily and attendance field data can be in this form "24/mar/2011 16:15 pm"..Now I want to calculate difference time between these two fields therefore I used this statement
SQL> Select to_char(attendance_date,'HH24:MI') to_char(shift_date,'HH24:MI') from dual;
but it is showing error: ORA-01722: invalid number...I used hours/minutes format mask in my query because you can see there is a difference of dates between these fields and it will be increase in the coming future and I need late hours and minutes.
I got that error bur I checked all the fields on RG query and they are not more 300 char in total. Even I changed the query but I still get this error.
View 2 Replies View RelatedI want to capture date and time in separate fields from user and save it in single column in table
example: user enters date and time
Date : 08/05/20212
Time : 18:50:00
At the time of save I want to save [08/05/2012 18:50:00].
My requirement is to call a form through special menu icon from one main form and display some information. Whenever i open a new form it should fetch a record and display where some of the fields should be available to edit. I am displaying a record based on a view.
For that i have used below code in when-new-form-instance
- GO_BLOCK('Block name');
- DO_KEY('Execute_Query');
After executing the query my block status is becoming 'QUERY' where i am not able to set the block/item property "Update allowed" to true.
I have added below piece of code
set_item_property('block_name.item name',insert_allowed, PROPERTY_TRUE);
set_item_property('block_name.item name',UPDATE_ALLOWED,PROPERTY_TRUE);
in almost all the triggers and tried. I could still see all the fields are read only.
I have developed a screen using oracle forms.... it has 4 text fields..then a LOAD button.After giving i/p in the 4 text boxes user will save (ctl+S) ..then hit LOAD button ,which will populate the fields below the screen.Everything is working fine but only problem I am facing...when user is trying to save (ctl+S) after giving the 4 i/ps in the text fields....the text fields getting disappeared and also becoming editable...though the data they have already given is being populated in the table..I want ..even after pressing ctl+S...the data should be there & non-editable.
View 2 Replies View RelatedSomething strange happens when i give execute query in a form (Oracle Forms 10g.). On executing query, one field disappeared but when i clicked on the location of the field it appeared again. I am not sure if this has something to do with visual attributes/display properties. This is happening only after migration to 10g.
View 7 Replies View RelatedIn my Folder Form i have 6 Total Fields(SUM) , when i press anyone of these Total Filed, to move Right Or Left i got an error like this "frm-40733 pl/sql built-in set_group_char_cell failed."
View 6 Replies View RelatedWe have an application, using ddl database trigger on oracle database.Trigger depends on package and several tables, package depends on user defined function.It works on different customer sites well, but for one customer (11g?), sometimes (cannot determine when and why), trigger became disabled.
I know, that trigger can became invalid, when its dependencies changed (i think in this situation oralce probably try to re-compile it). I understand that it can changed to be invalidwhen dependencies are not valid.I know I can alter trigger to became disabled manually.
But when it can became disabledwithout explicit alter statement be run!? Are there some conditions / circumstance when Oracle changed the trigger to be disabled?We'll ask the customer DBA team to enable audit on trigger, but it will take time to be done..
I have a requirement of pulling the data from a field in horizontal form of Advanced Supply Chain Planning responsibility(ASCP). When I go into help-> Diagnostics, it shows the block name of the form as 'Horizontal Plan' and field name as 'Pivot Table'. Not pretty sure on how to pull the data source into horizontal form with the info I have.
View 3 Replies View RelatedCurrently, the only way I can find of doing so is to try to disable an instance, and if it is already disabled, it warns you that its disabled. This is not exatly an ideal solution! How do I simply run a query or issue a crs command to list all disabled database instances.
View 1 Replies View RelatedOracle Enterprise Manager 11g, navigating to the Performance tab for our test database. The "SQL Performance Analyzer" link is not apparent (as is all the other links).
I checked the "setup", in particular, the Management Pack Access ... all of these have checks by them ...
Database Change Management Pack
Database Configuration Management Pack
Database Diagnostics Pack
Data Masking Pack
Database Tuning Pack
Provisioning Pack
Pack Access Agreed.
Also, checked the value of the "control_management_pack_access" which reads "DIAGNOSTIC+TUNING"
How to get the "SQL Performance Analyzer" link enabled? Apparently, according to one of my colleagues, they used it about a month ago, so I don't know what could have happened between then and now.