I am trying to describe all the tables in a database.We use desc or describe tablename; to describe a table, but what is the command to describe all the tables in a database (i don't need the system tables)
Once i log into sqlplus as a say ABC (SID or HostString) as a user then if i do a desc table name i get column name, data type and null not null etc but i i need that for all the tables in that ABC database..
I have installed oracle 10g software and created Database on RHEL 4. when i run the run.sql its successively done but im not getting tables. whats the prob.
View 17 Replies View RelatedI just trying to describe each table in a schema in one go. What I found is
SELECT table_name, column_name, data_type, data_length FROM user_tab_columns
It gives the output in following format-
Quote:table_name1 col_name1 col_type data_length
table_name1 col_name2 col_type data_length
table_name1 col_name3 col_type data_length
table_name2 col_name1 col_type data_length
table_name2 col_name2 col_type data_length
table_name2 col_name3 col_type data_length
table_name2 col_name4 col_type data_length
but I want the output in following form-
Quote:table_name1 col_name1 col_type data_length
col_name2 col_type data_length
col_name3 col_type data_length
table_name2 col_name1 col_type data_length
col_name2 col_type data_length
col_name3 col_type data_length
col_name4 col_type data_length
I have installed the Oracle 10g software and created Database my own in RHEL 4. i got the emp tables when i run @?/rdbms/admin/utlsampl.sql with main user system. After i created another user test and i tried to get the tables. but im getting error like table not exist.
View 11 Replies View RelatedI want to find out the columns on which primary constraints are enabled.Which view must I use to check this.
View 2 Replies View RelatedI have problem with moving old DB to the new (the same DB 10.2.0 in Win 2003, first in 32 bit, second in 64 bit). I want move DB from 32 to 64 bit. Problem is that all objects in old DB were created in SYSTEM schema by SYS. I can't export that objets (with data) because impdp nor imp don't touch this objects (tables with indexes). I can't use export import procedure. I'm looking for another method to transfer data, which will be the best and the fastest? Maybe files copy on OS? I suppose it will be problems with configuration files, database have other tablespaces.
View 13 Replies View RelatedIn an attempt to take older data off line and allow database refreshes to be faster, tablespaces associated with partitioned table data for a given time period was taken off line, leaving only tablespaces that relate to the current time period online. In effect, tablespaces related to 2010 and earlier were taken offline from a table.
1. Without giving a filter on the partition key (the business date) to scan for data greater than the dates in the off lined tablespace partition, we get a ORA-376/ORA-1110 error (data file cannot be read at this time).
2. Materialized views using fast refresh or refresh on commit, will also not work because of the partitions being off line.
Queries directly querying the tables are manageable from an application point of view.But the materialized views failing to aggregate is a bigger problem.
how we can manage this situation? I know that I can move the partitions to a different table in a tablespace to be taken off line. But if possible, we wanted to solve this without doing a move partition.
create a procedure or cursor to allocate extents to all tables with zero rows for all the user in the database.I have used the below query to check table with zero rows and no extents allocated.
select onwer,table_name,initial_extent
from dba_tables where initial_extent is null order by owner;
I generated the query to allocate extents by using concatenation in the above query.
select 'ALTER TABLE '||table_name|| ' ALLOCATE EXTENT; '
from dba_tables where initial_extent is null order by owner;
now I want the extent allocation for such table auutomatically for aal the tables with zero rows.
would want to check which tables located in which datafiles.
Tried with this command:
select B.FILE_NAME from dba_segments a, dba_data_files b
where a.header_file=b.file_ID and segment_name='TABLE_NAME'
Seems like it only shows 1 datafile. Some tables are large and i suppose it's resided in more than 1 datafile.
There is a readonly user on our reporting server. Developers want to use global temporary tables with this user. I don't want the user to have permissions other than readonly.I can grant the user CREATE TABLE privilege and did not grant quota on any permanent tablespace, therefore user would not be unable to create permanent tables but still should be able to create global temporary tables.
Question is would a user with such permissions still be able to utilize temp tables as part of a scheduled job?
We want to find out difference of data for some tables between current day & previous day. We can use query with minus operation but it will take lot of time since table size is in range from 200 to 500 GB. We have to do this exercise every day.
View 5 Replies View RelatedIs it possible to create trigger on the various tables and views exists (i.e. dynamic performance views) in data dictionary, when ever any DML operations performs by Oracle it self?
View 6 Replies View Relatedthat are my biggest tables
Users use front end (called ESS Console) and when they try to open one of those tables they wait very long (really bad performance). Sometimes the GUI even hanging without displaying results.
Does Partitioned Tables feature works for better performance?
my user is trying to drop columns, but she gets below error:
SQL Error: ORA-39726: unsupported add/drop column operation on compressed tables
39726. 00000 - "unsupported add/drop column operation on compressed tables"
i just checked whether table is compressed or not, it is not compressed it seems:
select owner, table_name,COMPRESSION,COMPRESS_FOR from dba_tables
2 where owner = 'EQUIPMENT' AND TABLE_NAME = 'ETHRNT_VRTL_CNXN_HRLY_AGG_SWP';
OWNER TABLE_NAME COMPRESS COMPRESS_FOR
------------------------------ ------------------------------ -------- ------------
EQUIPMENT ETHRNT_VRTL_CNXN_HRLY_AGG_SWP DISABLED
1 row selected. i am able to set one column as UNUSED. and then i am able to see the count accordingly from below view:
select * from DBA_UNUSED_COL_TABS
where owner ='EQUIPMENT' and table_name = 'ETHRNT_VRTL_CNXN_HRLY_AGG_SWP';
but not able to drop the unused columns. if i tried to drop a column directly from the table, that also giving above error.
We are using Oracle 10g and have 10 tablespaces defined for our Database which have 108 tables. Size of 108 tables is around 251 MB as seen during importing the dump. While creating these 10 tablespaces I used below parameters for allocation of space
SIZE 1M REUSE AUTOEXTEND ON NEXT 1M MAXSIZE 1M;
which set the initial space for 10 tablespaces to around 1032Kb each. Now my Question is after importing the dump , how the disk space for 10 tablespaces increases to 398 MB in total ?
Is there any relation of Tablespace disk space and Actual Data present in the tables ?
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 Replies View RelatedI'm trying to export a relatively large database but it's a bit more complicated than that.For one schema I need a full export / import (data included).
For another 10 schemas I need them empty, with the exception of a table in some of them which needs to be exported / imported with all data inside.Is it possible to do this with datapump utility (impdp, expdp)?
Afterwards I will be running some scripts to populate the DB instance with critical data / metadata.
I have 780(12*65) csv files generated from 65 databases.Now I have to load this 780 csv files into 12 tables created in my database for some monitoring and reporting purpose.to call the sql loader I am plannig to create 780 lines like below.
sqlldr abc@tns/pwd control='E:htmlctlhtml_broken_jobs_rpt.ctl' log='E:htmlreportloghtml_broken_jobs_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_db_size_rpt.ctl' log='E:htmlreportloghtml_db_size_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_fragmentation_rpt.ctl' log='E:htmlreportloghtml_fragmentation_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_index_stats_rpt.ctl' log='E:htmlreportloghtml_index_stats_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_invalid_object_rpt.ctl' log='E:htmlreportloghtml_invalid_object_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_long_running_queries_rpt.ctl' log='E:htmlreportloghtml_long_running_queries_rpt.log'
we know creating 780 control files is the difficult task.So I have created only 12 control files. is there any mechanism to pass a varible (planning to declare it in the sqlldr line) to the infile clause like below in sql loader?
infile "E:htmlreportoutput&a_html_broken_jobs_rpt.csv"
here a is the variable name. it will change every 12 csv files once.
or
is there anyother way to achive this?
i am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
View 22 Replies View RelatedI am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
I have database in single server. I already have ORACLE_SID=stagedb. So i want to create new sid and named as proddb.Is it possible have multiple db in single server? This server not running as RAC. It run as single only.
View 1 Replies View Relateddatabase administration , we are planning to use amazon cloud database , this database does not allow us to login to server machine , unfortunately amazon don't provide ssh to this machine , in general for doing any of adminstration task on the database will there be need to log into the machine ? we can always log in through toad or any other sql client but we cannot do ssh to server..general can this limitation effect administration ?
View 9 Replies View RelatedI recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedI am connected as System. It was the only user I set-up a password when installed the database on personal computer.
SQL> alter user sys identified by mypass007
2 /
User altered.
SQL> connect sys/mypass007
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
[code]...
SQL> conn sysoper/mypass007
ERROR:
ORA-01017: invalid username/password; logon denied
I want to know if I can access a procedure created on Database server A from database server B.
View 2 Replies View RelatedWe have an Oracle Server database of Size 50 GB having 10 GB Data. And Planning to have a new Database Server of 200GB . So my question is after moving all the 10 GB data to 200 GB Database Server, will the performance of the system come down? Will it reduce the speed?
View 9 Replies View RelatedCan I extract data from our Oracle server regarding the no. of sessions per day? But the problem is that our Boss wants a previous dates from April 11-17, 2011.
View 4 Replies View RelatedI have some requirement wherein I need to install Oracle 9i database server (9.2.0.7). I am not getting it on Oracle website. where can I get the download.
View 1 Replies View Relatedsee as i said keep on my database down in the night time around 9 pm. the OS redhat linux 5 restarting morning around 6.45 am.when i check alert_log there is no indication.when i check OS log , OS restarting around 6.45 amchecked in the log file in OS level
location: /var/log
i found this
Jun 7 06:45:33 Alraya syslogd 1.4.1: restart.
Jun 8 06:42:22 Alraya syslogd 1.4.1: restart.
Jun 9 06:47:12 Alraya syslogd 1.4.1: restart.
what is this mean, system restarting around 6:45 daily i think now i m posting listener.log for reference
<b>06-JUN-2010 21:04:52 *</b> (CONNECT_DATA=(CID=(PROGRAM=)(HOST=Alraya)(USER=alrayaora))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADD
RESS=(PROTOCOL=TCP)(HOST=Alraya)(PORT=1521)))(VERSION=169869568)) * status * 0
06-JUN-2010 21:05:05 * (CONNECT_DATA=(SID=alraya)(CID=(PROGRAM=perl@Alraya)(HOST=Alraya)
[code]...
OS is restarting around 6.45 in the morning, but database getting down night around 9 pm itself why then in the morning if i bounce the database it starting with no problem