We are doing select statements. I have 3 tables that I need to get information out of and I believe I need to use a join but everything I put into oracle gives me an error.I'm doing the selects for a pharmacy and have a customer table, a drug table, and a prescriptions table.
I need to write a select statement that shows what customers are taking what drugs and how many mgs they take
When executing a SELECT with JOIN in oracle error as I am having the title. If I change the JOIN to where the procedure works normally. When installing my application, it works normally for a day or two, then it only shows the end of communication error. What I do is select the following:
I have been out of work for 2+ years. Am about to start a job next week doing Oracle back end, Forms, and Reports development among other things. I was asked if I could take a look at 3 report requirements and give an estimate on how long it would take to correct errors in these reports. All I have is a user requirement document stating what the report is currently doing and what it should be doing, a partial screen print of an Oracle Form showing correct data, and a sample report page showing incorrect data.
I am finding it rather difficult to give an estimate without seeing tables, relations, code, etc. Is it me or does this seem nearly impossible?I do not have access to their system yet so cannot view the database or run select statements, run the report, etc. All I have are the documents I listed above.
I'm attempting to audit unsuccessful Select statements in order to trap a problem we're experiencing with our application. I have set the AUDIT_TRAIL initialization parameter to DB_EXTENDED, and bounced our database.
I've issued the AUDIT SELECT ANY TABLE WHENEVER NOT SUCCESSFUL command, and when I issue a SELECT statement as an application user, nothing appears in SYS.AUD$ even though the application has issued a select statement which returned no rows.
1. I Wnat to analyze the buffer cache hit ratio. This is what i did.
DECLARE bufcac NUMBER(10, 2); BEGIN
[Code]....
2. I would like to analyze the PGA and determine what percentage out of the maximum allocated PGA is being used. I tried the code below but can't find the percentage. Sad
function test_1 begin if....then ...end SELECT... BULK COLLECT INTO.. FROM .... [code]...
obviously this is not the whole code, but lets say the first if...then..end is true , does this mean it will exit the block? like it won't continue to the other stuff like select, if ...then statements?
ive got two select statements which fetches data from different tables. I need to join the two result set . is it possible to do it from sql. Heres the query.
1)
SELECT COUNT(CASE WHEN (INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=1) THEN 1 END)CUSTOMER_EMAIL, COUNT(CASE WHEN INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=2 THEN 1 END)OTHER_EMAIL,
[Code]....
2)
SELECT SUM (CHEQUE_TOTAL) CHEQUE_TOTAL FROM RI_CHEQUE_VOUCHER_REFUND refund INNER JOIN CH_CASE case ON (case.id = refund.id) INNER JOIN EVA_ENTITY_DEFINITION ed ON (ed.name= 'ChequeRefundCaseED') WHERE case.creation_time<= SYSDATE AND case.creation_time>= SYSDATE-7
Again I need to combine the resultset.So the result would look like
I used bulk collect and for all statements to select and insert the data in temp table.The select SQl is returning one row. But its not inserting this row into temp table.Its not throwing any exceptions. Used ref cursor because the select statement is going for every cursor.
here modified the code and provided only one cursor.
Create Or Replace Procedure Sales_Hist_Update_Bkp Is Type Type_Name Is Record( Sku_Item_Key Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Sku_Item_Key%Type, Locationno Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Locationno%Type, Bsns_Unit_Key Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Bsns_Unit_Key%Type, Act_Item_Cost_Amt Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Item_Cost_Amt%Type, Act_Rglr_Unit_Price_Amt Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Rglr_Unit_Price_Amt%Type, [code]...
I'm trying to retrieve data with multiple select statements. The query works fine for 1 account (segment6) but fails for more than account. Below is the query.
I want to count the batch records using BATCH_ID with CASE statement ,for that i am using below query but its not working ,
SELECT COUNT(*) FROM <TABLENAME> WHERE VNBATCH_ID=CASE WHEN #SDC <10 AND #PERIOD >=10 THEN 0||#SDC||#PERIOD||#BATCH_ID WHEN #SDC <10 AND #PERIOD <10 THEN 0||#SDC||0||#PERIOD||#BATCH_ID WHEN #SDC >=10 AND #PERIOD <10 THEN #SDC||0||#PERIOD||#BATCH_ID ELSE #SDC||#PERIOD||#BATCH_ID END
I want to merge the following two sql statements into single output.
select id,count(*) from derailed where changed_on between to_date('26-july-13 18:30:00','DD-Mon-YY hh24:MI:SS') and to_date('01-August-13 18:29:00','DD-Mon-YY HH24:MI:SS') group by id;
I am using oracle 10g i have a table on my computer that i made for a friend when i load it on their computer the select statements say no data found if i use select * from table name all the data will show
if a column name select * from table name where duty_date = '05-JAN-11'no data found
I am importing some data from Oracle into another database on a regular basis. It works fine for most of the queries but couple of queries don't work sometimes (random). I don't get any errors or any data.
We switched on the Oracle auditing to find out the queries being sent to oracle db. We can see all the queries in the Audit log. Is it possible to configure Auditing to get the "Number of Rows" returned by Select statements so that we can be sure that some data was returned.
I have a select statement that selects all columns from the join of 3 oracle views. I would like to change it to select only the distinct rows, not sure how to code this. Here is my sql statement:
select * from myschema.view_1 acct Left JOIN myschema.view_2 freq
Having production system: 11.2.0.1 on Windows Server x64 Test system: 9.2.0.1 on Windows XP
Problem preface: to get all unique CASEID which should be checked up by biometric system.What i should check - all CASEs for different PERSONs having same PHONEs at least among one phone type (1..4).Real table contains little bit more than 10 million records.I made test scripts.
Below the DDL for test table creation: ------------------------------------------ -- Create CASEINFO test table ------------------------------------------ DROP TABLE CASEINFO; CREATE TABLE CASEINFO
[code]...
Below i've put SQL/DLL to make test data.number of records inserted 2 millions. PERSON_COUNT := #/8; ------------------------------------------ -- fill CASEINFO with sample data ------------------------------------------ DECLARE I INTEGER;
[code]...
Below SQL select to check the data in created table. ------------------------------------------ -- Check test data counters ------------------------------------------ SELECT 'TOTAL',count(*) from CASEINFO UNION ALL SELECT 'LEGAL',count(*) from CASEINFO where
[code]...
The PROBLEM is that i am experiencing HUGE perfomance problems on both test and production systems with that query:
select distinct b.caseid from CASEINFO a, CASEINFO b where (a.person<>b.person) and (a.sex=b.sex) and ( (a.phone1=b.phone1) or (a.phone1=b.phone2) or (a.phone1=b.phone3) or
[code]...
This query takes almost 90 minutes to execute.And i do not know how to avoid this.Full SQL file to make test attached.
I'm trying to create a relation from child block to the master block that I've created . Foreighn key is there from child to parent table.The error I get is below:
FRM-15004: Error while parsing join condition
The join condition is correct, but I'm still clueless as to what it could be.Is it a form bug?
I receive a "FRM-15004 Error while parsing join condition" when attempting to create a relation between block1 (parent table) and block2 (child table). If I do a simple straight join the statement is accepted but if I use a Decode then it results in an error. How to successfully use a decode or a nvl in a join statement of a relation?
Can we execute more than one insert statements at a time (eg 10) in database and givecommit at the end of insert statements or else give a commit one by one after each insert statements ?
Error report: SQL Error: ORA-01427: single-row subquery returns more than one row 01427. 00000 - "single-row subquery returns more than one row" *Cause: *Action:
UPDATE XXX_CURR_EOM SET ID = (select CAPITALPLAN.ID from capitalplan, XXX_CURR_EOM where XXX_CURR_EOM.ID = CAPITALPLAN_id)
how do I create a procedure for a SELECT query like the following?
When I create a procedure; I get an error "Error(80,1): PLS-00428: an INTO clause is expected in this SELECT statement" PROCEDURE MyProcISBEGINselect 'Dakota' as ALIAS ,A.StartDate ,B.EndDatefrom Customer A ,Clients bwhere a.cType = b.cTypeand b.Active =0ORDER BY StartDate, EndDateEND MyProc;
i am getting a below error whenever executing the below select query. some times it will show dead lock detected while waiting for resource and terminated...some times it executes and gives result..but all the time it writes an alert to alert log
Env: Linux / Oracle 11.2.0.3.3..Error from alert log:Errors in file /u01/oracle/oracle/diag/rdbms/bdrdb/bdrdb/trace/bdrdb_p017_6076.trc:ORA-00060: deadlock detected while waiting for resourceORA-10387: parallel query server interrupt (normal) Trace file info... bdrdb_p017_6076.trc:Trace file /u01/oracle/oracle/diag/rdbms/bdrdb/bdrdb/trace/bdrdb_p017_6076.trcOracle Database 11g Enterprise Edition Release 11.2.0.3.0 - ProductionWith the Partitioning, OLAP, Data Mining and Real Application Testing optionsORACLE_HOME = /u01/oracle/oracle/product/11.2.0/dbhome_1System. [code]....
i want to know the difference between Left outer join Vs. Right outer join? Its like which join is safer to use or is there any recommendations to use any join?
I know, importing a *.CSV-table is easy using a few clicks with the GUI, but I want to know, how to import and create new tables, using the existing *. CSV-files, with SQL statements.
