Is it possible to have $ substitutions in Select statements ?
For example
Select * from my_table where ID in ${ID_LIST} and DAY >= to_date(${SOME_DATE})
$ID_LIST = (100,200,300)
$SOME_DATE = 10-10-2011 12:12:00
For the ID_LIST is using Prepared statements with ?,?,? the way to go ? Or are there are any Define we can do in SQL plus for this substitions ?
Been trying to concatenate the following two select statements (to then pass as a parameter in DML statement) without much luck.
Select lpad(ST_DAY,'2',0) || '/' || lpad(ST_MONTH,'2',0) from RET_FORMATS;
Select to_char(sysdate,'YYYY')"Year" FROM DUAL;
I have been out of work for 2+ years. Am about to start a job next week doing Oracle back end, Forms, and Reports development among other things. I was asked if I could take a look at 3 report requirements and give an estimate on how long it would take to correct errors in these reports. All I have is a user requirement document stating what the report is currently doing and what it should be doing, a partial screen print of an Oracle Form showing correct data, and a sample report page showing incorrect data.
I am finding it rather difficult to give an estimate without seeing tables, relations, code, etc. Is it me or does this seem nearly impossible?I do not have access to their system yet so cannot view the database or run select statements, run the report, etc. All I have are the documents I listed above.
I'm attempting to audit unsuccessful Select statements in order to trap a problem we're experiencing with our application. I have set the AUDIT_TRAIL initialization parameter to DB_EXTENDED, and bounced our database.
I've issued the AUDIT SELECT ANY TABLE WHENEVER NOT SUCCESSFUL command, and when I issue a SELECT statement as an application user, nothing appears in SYS.AUD$ even though the application has issued a select statement which returned no rows.
We are doing select statements. I have 3 tables that I need to get information out of and I believe I need to use a join but everything I put into oracle gives me an error.I'm doing the selects for a pharmacy and have a customer table, a drug table, and a prescriptions table.
I need to write a select statement that shows what customers are taking what drugs and how many mgs they take
customer_id,
customer_first_name,
customer_last_name,
drug_id,
drug_name,
prescription_unit
i think i need that information for the select but I cant seem to write a select statement that runs without errors.
1. I Wnat to analyze the buffer cache hit ratio. This is what i did.
DECLARE
bufcac NUMBER(10, 2);
BEGIN
[Code]....
2. I would like to analyze the PGA and determine what percentage out of the maximum allocated PGA is being used. I tried the code below but can't find the percentage. Sad
SELECT NAME,
To_char(Decode(unit, 'bytes', VALUE / ( 1024 * 1024 ),
VALUE), '999,999,999.9') VALUE,
[Code]....
Apart from the little problem I have with number 2, not figuring out how to get the precentage seeing that all the data is store in the field VALUE.
I would also like to create a view that has both 1 and 2 in it, but whenever I try creating it, I got and error stating and INTO clause is expected.
how can i insert and update to a table in oracle database 10g through a select statement. not using merge.
View 2 Replies View Relatedif i have a function
function test_1
begin
if....then ...end
SELECT...
BULK COLLECT INTO..
FROM ....
[code]...
obviously this is not the whole code, but lets say the first if...then..end is true , does this mean it will exit the block? like it won't continue to the other stuff like select, if ...then statements?
ive got two select statements which fetches data from different tables. I need to join the two result set . is it possible to do it from sql. Heres the query.
1)
SELECT
COUNT(CASE WHEN (INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=1) THEN 1 END)CUSTOMER_EMAIL,
COUNT(CASE WHEN INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=2 THEN 1 END)OTHER_EMAIL,
[Code]....
2)
SELECT
SUM (CHEQUE_TOTAL) CHEQUE_TOTAL
FROM RI_CHEQUE_VOUCHER_REFUND refund
INNER JOIN CH_CASE case ON (case.id = refund.id)
INNER JOIN EVA_ENTITY_DEFINITION ed ON (ed.name= 'ChequeRefundCaseED')
WHERE
case.creation_time<= SYSDATE
AND
case.creation_time>= SYSDATE-7
Again I need to combine the resultset.So the result would look like
Customer_Email Other_Email Customer_Whitemail Other_whitemail Customer_telephone Other_Telephone Cheque_total
I used bulk collect and for all statements to select and insert the data in temp table.The select SQl is returning one row. But its not inserting this row into temp table.Its not throwing any exceptions. Used ref cursor because the select statement is going for every cursor.
here modified the code and provided only one cursor.
Create Or Replace Procedure Sales_Hist_Update_Bkp Is
Type Type_Name Is Record(
Sku_Item_Key Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Sku_Item_Key%Type,
Locationno Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Locationno%Type,
Bsns_Unit_Key Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Bsns_Unit_Key%Type,
Act_Item_Cost_Amt Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Item_Cost_Amt%Type,
Act_Rglr_Unit_Price_Amt Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Rglr_Unit_Price_Amt%Type,
[code]...
I'm trying to retrieve data with multiple select statements. The query works fine for 1 account (segment6) but fails for more than account. Below is the query.
select PERIOD_NAME "Month/Year",segment1 "Company" ,Segment6 "GL Account", currency_code "Currency",Mmt "Movement",
BEGIN_BALANCE+PERIOD_DR-PERIOD_CR "Balance At Date"
FROM
(select gb.period_name "PERIOD_NAME",decode (gcc.segment1, '20', 'Internode', '10', 'Agile') SEGMENT1,
gcc.segment6 "SEGMENT6", gb.currency_code "CURRENCY_CODE", gb.begin_balance_dr "BBDR", gb.begin_balance_cr "BBCR",
[code].....
I want to count the batch records using BATCH_ID with CASE statement ,for that i am using below query but its not working ,
SELECT COUNT(*) FROM <TABLENAME> WHERE VNBATCH_ID=CASE WHEN #SDC <10 AND #PERIOD >=10 THEN
0||#SDC||#PERIOD||#BATCH_ID
WHEN #SDC <10 AND #PERIOD <10 THEN
0||#SDC||0||#PERIOD||#BATCH_ID
WHEN #SDC >=10 AND #PERIOD <10 THEN
#SDC||0||#PERIOD||#BATCH_ID
ELSE
#SDC||#PERIOD||#BATCH_ID
END
I want to merge the following two sql statements into single output.
select id,count(*) from derailed where changed_on between to_date('26-july-13 18:30:00','DD-Mon-YY hh24:MI:SS') and to_date('01-August-13 18:29:00','DD-Mon-YY HH24:MI:SS') group by id;
select id,code from dbo;
I am using oracle 10g i have a table on my computer that i made for a friend when i load it on their computer the select statements say no data found if i use select * from table name all the data will show
if a column name select * from table name where duty_date = '05-JAN-11'no data found
I am importing some data from Oracle into another database on a regular basis. It works fine for most of the queries but couple of queries don't work sometimes (random). I don't get any errors or any data.
We switched on the Oracle auditing to find out the queries being sent to oracle db. We can see all the queries in the Audit log. Is it possible to configure Auditing to get the "Number of Rows" returned by Select statements so that we can be sure that some data was returned.
HOW i can use the Substitution Variables in select statement in From phrase
we need execute select statement in different users in run time.
Here is a simple sqlplus line command with & substitution run time variable.
set verify off;
SQL> SELECT * FROM emp where sal >&SAL;
Enter value for sal:
Now as you see, oracle asks to Enter Value for substitution variable in line just below the SQL>. I wonder if there is one or more line could be left there so to improve the readability. So it should look like:
set verify off;
SQL> SELECT * FROM emp where sal >&SAL;
Enter value for sal:
Below is the code, I am trying.
I have all the bind variables in "using_stmt" variable. How can i make this work. Currently I am getting error
ORA-01008: not all variables bound
--------------------------------------
DECLARE
SQL_STMT varchar2(200);
using_stmt varchar2(200);
dept_id number := 50;
dept_name varchar2(14) := 'PERSONNEL';
loc varchar2(13) := 'DALLAS';
rec_count number;
[code]......
I have a table emp with columns [id,name,job_id,dept_id]. now I make a simple select query.
select id,name,job_id,dept_id
from emp
where id = &a
and name = &b
and job_id =&c
and dept_id =&d;
now in this case it will ask the values for all the columns and will according print result.
Now my questions is what will happen if I just pass the value for only id and name not for other two...?
Declare a variable called sal to store the salary of an employee. In the executable part of the program, do the following:
a.Store an employee name in a substitution variable.
b.Store his or her salary in a variable.
c.If the salary is less than 5,000, give the employee a 10% raise and display the message "<Employee Name> salary updated" in the window.
d.If the salary is more Last Name Message than or equal to 3,000, print the employee's salary in the format, "<Employee Name> earns ............. No raise is given."
So the result should ask for the last name
- Himuro and message should show [Himuro's salary updated]
- Greenberg [Greenberg earns 12000. No raise is given.]
- Patel [Patel's salary updated]
Here is my PL/SQL
set serveroutput on
DECLARE
v_emp_sal employees.salary%type;
v_emp_last_name employees.last_name%type;
BEGIN
v_emp_last_name :=initcap('&emplastname');
SELECT salary
INTO v_emp_sal
[code]......
question:
How can I get the apostrophe in the dbms_output.put_line. Attached is the create employees table code.
How I go about writing a query that doesn't see the '&' symbol as a substitution character. The problem I have is:
select replace
( fnd_profile.value( 'XXBPO_URL')
, '&DOCID'
, ai_dfv.bpo__document_link
) document_link
from ap_invoices_all ai
, ap_invoices_all_dfv ai_dfv
where 1=1
-- where clause
The problem above is that instead of replacing the characters &DOCID with the required value, it is prompting for input.
I want to insert the value with '&'. But this is treated as substitution variable by oracle.So how can it is possible to do like this
INSERT INTO DEPT (DEPTNO, LOC, DNAME)
VALUES (50, '&NEW YORK', 'SALES');
I have created a list with name Test_List and 5 values in it.
I want to pass the values dynamically when i select the list values (any of the 5 values).
I tried:
For each list setting(List Details --> Static list entries --> Target) i have set the
Request as ?Test_List=#Test_List#
Note: Here Test_List is my list name.
Also i have tried
Request as ?Test_List=&Test_List.
But nothing seems to be working...
Can we execute more than one insert statements at a time (eg 10) in database and givecommit at the end of insert statements or else give a commit one by one after each insert statements ?
View 8 Replies View RelatedI wish to replace the string "Benutzername&Kontakt" with nothing.
SELECT REPLACE (role_owner, 'Benutzername&Kontakt', '')
FROM JC_NAME_62
WHERE jc_name LIKE 'SAP_R4_BIN5\_%' ESCAPE ''
But my Toad prompts me always to fill in the variable. I don't wish to do that, I wish to escape the &
I was wondering if there is a substitution string ( or something else) that could be used to 'return' the name of a Form item that has cursor focus?
View 3 Replies View RelatedI know, importing a *.CSV-table is easy using a few clicks with the GUI, but I want to know, how to import and create new tables, using the existing *. CSV-files, with SQL statements.
how to import a .CSV-file using SQL-statements?
I have a column in a database that contains both numerical and char data. I would like to be able to do two different things (two different queries)
1. divide the numerical data in the column by 10 and leave the char data alone (just return it)
2. detect the numerical data in the column and treat is as a different value so I can run averages & counts on it while disregarding the char data
I'm not at all sure how to do number 2. I thought a CASE statement would work for number 1, but then I realized CASE doesn't like different datatypes:
select
case when '1234' = 'checked' then 'checked'
when '1234' = 'gen.nograde' then 'gen.nograde'
when '1234' = null then null
else '1234'/10 end as "GRADE"
from dual
Error report:
SQL Error: ORA-00932: inconsistent datatypes: expected CHAR got NUMBER
00932. 00000 - "inconsistent datatypes: expected %s got %s"
I have a read access on all the 200+ tables in a schema, How can i generate 200+ .sql files with insert statements on all the tables of schema.
View 13 Replies View Related From database server, I need to monitor the details about the sql statements which are being currenlt running in client machines.
I tried with V_$SQLTEXT view where I can only see the SQL statements, hash value,address,SQL_id. but I'm not able to get the user name,name the client machine .
find out these details?.Which Data Dictionary i need to use ?.