I want to count the batch records using BATCH_ID with CASE statement ,for that i am using below query but its not working ,
SELECT COUNT(*) FROM <TABLENAME> WHERE VNBATCH_ID=CASE WHEN #SDC <10 AND #PERIOD >=10 THEN
0||#SDC||#PERIOD||#BATCH_ID
WHEN #SDC <10 AND #PERIOD <10 THEN
0||#SDC||0||#PERIOD||#BATCH_ID
WHEN #SDC >=10 AND #PERIOD <10 THEN
#SDC||0||#PERIOD||#BATCH_ID
ELSE
#SDC||#PERIOD||#BATCH_ID
END
below query is returning two rows.The thing now happening is the query is returning the output for both the case statements.But what is need only when the first case staement is NULL then it should go for second case.
SELECT DISTINCT CASE
WHEN esc.x1 = Substr(inp.y, 0, 3)
AND esc.x2 = Substr(inp.y, 4, 2)THEN esc.cc
WHEN esc.mcc = Substr(inp.y, 0, 3)
AND esc.mnc = Substr(inp.y, 4, 3)THEN esc.cc
[code]....
I tried using rownum=1 but it filters out valid records.correcting the above query so that if the first case is null then only it should go for second case.
I have 2 tables, ASSIGNMENT and RESEARCH_PAPER. For each research paper, I need to find out :
1. The number of assignments created from it (after a given constant assign date)
2. The number of assignments created from it that have been approved.
3. The number of unique users who have either created or approved an assignment from it
Test data :
create table research_paper (id int, name varchar2(100));
create table assignment (id int, r_paper_id int, assigner_id int, assignee_id int,
approver_id int, assign_date timestamp, approved_yn varchar2(10));
insert into research_paper values (1, 'A');
insert into research_paper values (2, 'B');
[code]....
Assignment :
id r_paper_id assigner_id assignee_id approver_id assign_date approved_yn
-----------------------------------------------------------------------------------------------------------
11 100 200 100 23-10-12 12:00:00.000000000 AMY
22 200 100 200 22-10-12 12:00:00.000000000 AMN
32 100 200 101 24-10-12 12:00:00.000000000 AMY
[code]....
Research_paper:
id name
----------
1A
2B
Expected result :
r_paper_id created approved unique_users
-----------------------------------------------
1 3 2 4
2 3 2 3
I wrote the following query for that :
SELECT rp.id r_paper_id,
COUNT(*) created,
COUNT(
CASE
WHEN a.approved_yn = 'Y'
[code]....
But it fails, saying that 'single-row subquery returns more than one row' when I introduce the 'unique_users' clause. The remaining fields of the output are correct.
I have a case expression as follows:
(CASE WHEN DATEa=DATEb THEN 0
WHEN DATEa> DATEb THEN NETWORKDAYS(DATEb, DATEa)
WHEN DATEa < DATEb THEN NETWORKDAYS(DATEa, DATEb)
WHEN STATUS='PENDING' THEN NULL
ELSE NULL
END) AS RESULTa,
Now what I need to be able to do is place those results in buckets, similar to this:
(CASE WHEN RESULTa < 0 THEN '<0'
WHEN RESULTa between -1 AND 6 THEN '<=5'
WHEN RESULTa >5 THEN '>5'
ELSE ''
END) AS BUCKETa
I understand that I can't call an alias from a previous case expresson to get these desired results and how I could combine the two statements to get the desired bucket.
I am new to oracle programming.
I have a statement below
The statement below correctly filters the records that I require.. I now want to;
Count the number of records that meet the criteria and Delete the records that meet the criteria
select
sl.project_code,
sl.COST_code,
sl.category_code,
sl.supplier_code,
[Code]....
When attempting to create the following table I recieve the error
count(m.mission_id) < 4
ERROR at line 9:
ORA-00905: missing keyword.
assist in order to resolve this error.
CREATE TABLE AM_agents
AS
(
SELECT
a.first_name || ' ' || a.last_name fullname,
'agent' person_type,
[code]...
i am looking to write a query that will count all NOT NULL queue values in a table that belongs to a certain group, but not sure how to write it. The following is what I have wrote, but just wanted to clarify how to implement count case based on 2 criterias.
select *
count(case when queue is not null then 1 end) over(partition by group) as queue_orders
from table_a;
For example if I have 10 jobs that belong to group 1, but I would like to count all group 1 jobs that have a queue value.
I have no data at the mo, just something that I am trying to start off.
Been trying to concatenate the following two select statements (to then pass as a parameter in DML statement) without much luck.
Select lpad(ST_DAY,'2',0) || '/' || lpad(ST_MONTH,'2',0) from RET_FORMATS;
Select to_char(sysdate,'YYYY')"Year" FROM DUAL;
Is it possible to have $ substitutions in Select statements ?
For example
Select * from my_table where ID in ${ID_LIST} and DAY >= to_date(${SOME_DATE})
$ID_LIST = (100,200,300)
$SOME_DATE = 10-10-2011 12:12:00
For the ID_LIST is using Prepared statements with ?,?,? the way to go ? Or are there are any Define we can do in SQL plus for this substitions ?
I have been out of work for 2+ years. Am about to start a job next week doing Oracle back end, Forms, and Reports development among other things. I was asked if I could take a look at 3 report requirements and give an estimate on how long it would take to correct errors in these reports. All I have is a user requirement document stating what the report is currently doing and what it should be doing, a partial screen print of an Oracle Form showing correct data, and a sample report page showing incorrect data.
I am finding it rather difficult to give an estimate without seeing tables, relations, code, etc. Is it me or does this seem nearly impossible?I do not have access to their system yet so cannot view the database or run select statements, run the report, etc. All I have are the documents I listed above.
I'm attempting to audit unsuccessful Select statements in order to trap a problem we're experiencing with our application. I have set the AUDIT_TRAIL initialization parameter to DB_EXTENDED, and bounced our database.
I've issued the AUDIT SELECT ANY TABLE WHENEVER NOT SUCCESSFUL command, and when I issue a SELECT statement as an application user, nothing appears in SYS.AUD$ even though the application has issued a select statement which returned no rows.
We are doing select statements. I have 3 tables that I need to get information out of and I believe I need to use a join but everything I put into oracle gives me an error.I'm doing the selects for a pharmacy and have a customer table, a drug table, and a prescriptions table.
I need to write a select statement that shows what customers are taking what drugs and how many mgs they take
customer_id,
customer_first_name,
customer_last_name,
drug_id,
drug_name,
prescription_unit
i think i need that information for the select but I cant seem to write a select statement that runs without errors.
1. I Wnat to analyze the buffer cache hit ratio. This is what i did.
DECLARE
bufcac NUMBER(10, 2);
BEGIN
[Code]....
2. I would like to analyze the PGA and determine what percentage out of the maximum allocated PGA is being used. I tried the code below but can't find the percentage. Sad
SELECT NAME,
To_char(Decode(unit, 'bytes', VALUE / ( 1024 * 1024 ),
VALUE), '999,999,999.9') VALUE,
[Code]....
Apart from the little problem I have with number 2, not figuring out how to get the precentage seeing that all the data is store in the field VALUE.
I would also like to create a view that has both 1 and 2 in it, but whenever I try creating it, I got and error stating and INTO clause is expected.
how can i insert and update to a table in oracle database 10g through a select statement. not using merge.
View 2 Replies View Relatedif i have a function
function test_1
begin
if....then ...end
SELECT...
BULK COLLECT INTO..
FROM ....
[code]...
obviously this is not the whole code, but lets say the first if...then..end is true , does this mean it will exit the block? like it won't continue to the other stuff like select, if ...then statements?
ive got two select statements which fetches data from different tables. I need to join the two result set . is it possible to do it from sql. Heres the query.
1)
SELECT
COUNT(CASE WHEN (INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=1) THEN 1 END)CUSTOMER_EMAIL,
COUNT(CASE WHEN INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=2 THEN 1 END)OTHER_EMAIL,
[Code]....
2)
SELECT
SUM (CHEQUE_TOTAL) CHEQUE_TOTAL
FROM RI_CHEQUE_VOUCHER_REFUND refund
INNER JOIN CH_CASE case ON (case.id = refund.id)
INNER JOIN EVA_ENTITY_DEFINITION ed ON (ed.name= 'ChequeRefundCaseED')
WHERE
case.creation_time<= SYSDATE
AND
case.creation_time>= SYSDATE-7
Again I need to combine the resultset.So the result would look like
Customer_Email Other_Email Customer_Whitemail Other_whitemail Customer_telephone Other_Telephone Cheque_total
I used bulk collect and for all statements to select and insert the data in temp table.The select SQl is returning one row. But its not inserting this row into temp table.Its not throwing any exceptions. Used ref cursor because the select statement is going for every cursor.
here modified the code and provided only one cursor.
Create Or Replace Procedure Sales_Hist_Update_Bkp Is
Type Type_Name Is Record(
Sku_Item_Key Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Sku_Item_Key%Type,
Locationno Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Locationno%Type,
Bsns_Unit_Key Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Bsns_Unit_Key%Type,
Act_Item_Cost_Amt Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Item_Cost_Amt%Type,
Act_Rglr_Unit_Price_Amt Ordm_Int.Dwi_Rtl_Sls_Retrn_Line_Bkp.Rglr_Unit_Price_Amt%Type,
[code]...
I'm trying to retrieve data with multiple select statements. The query works fine for 1 account (segment6) but fails for more than account. Below is the query.
select PERIOD_NAME "Month/Year",segment1 "Company" ,Segment6 "GL Account", currency_code "Currency",Mmt "Movement",
BEGIN_BALANCE+PERIOD_DR-PERIOD_CR "Balance At Date"
FROM
(select gb.period_name "PERIOD_NAME",decode (gcc.segment1, '20', 'Internode', '10', 'Agile') SEGMENT1,
gcc.segment6 "SEGMENT6", gb.currency_code "CURRENCY_CODE", gb.begin_balance_dr "BBDR", gb.begin_balance_cr "BBCR",
[code].....
I want to merge the following two sql statements into single output.
select id,count(*) from derailed where changed_on between to_date('26-july-13 18:30:00','DD-Mon-YY hh24:MI:SS') and to_date('01-August-13 18:29:00','DD-Mon-YY HH24:MI:SS') group by id;
select id,code from dbo;
Can we use select statement in case statment for an update?
Example
UPDATE x SET field = CASE WHEN
(SELECT field1
FROM Y
WHERE field3 = x.field3
IS NOT NULL
THEN 'B'
ELSE 'C'
where cny# = 112160
I have the following tables:
create table lookups (code varchar2(20), amount number);
insert into lookups values ('Rent' , 500);
insert into lookups values ('Breakpoint' , 10);
create table products (id number, cost number, year varchar2(4));
insert into products values (1, 1000, '2011');
insert into products values (1, 2000, '2011');
insert into products values (2, 100, '2011');
insert into products values (3, 50, '2011');
commit;
I want to write a query which lists the IDs and the sum(cost), and a Y/N indicator which is set to 'Y' IF sum(cost) > ( (lookups.rent value) * (100 - lookups.breakpoint value))/100
I have written this query:
SELECT id,
sum(cost)cost,
year,
CASE
WHEN cost >
((SELECT amount
[code]....... ORDER BY id;
This returns
ID COST YEAR YN
--------- ---------- ---- -
1 1000 2011 Y
1 2000 2011 Y
2 100 2011 N
3 50 2011 N
The YN is correct, but it needs to sum the amounts. So there should only be one row for id1 = 3000.e.g.
ID COST YEAR YN
--------- ---------- ---- -
1 3000 2011 Y
2 100 2011 N
3 50 2011 N
I am not sure how to do this. Or is there a better way of doing this than using CASE.
select GAM.FORACID,
SOL.SOL_DESC,
GAM.ACCT_NAME,
LHT.LIM_SANCT_DATE,
LHT.SANCT_LIM,
to_char( GAM.CLR_BAL_AMT,'9,99,999.99'),
[code]...
i am getting error like this
ERROR at line 9:
ORA-00911: invalid character
I would like to know, if there is a solution under 10g for something like this
select case when "C" = 1
then
(select 1,2,3,4,5 from dual)
else
(select 6,7,8,9,0 from dual)
end
from dual,
(select 1 "C" from dual)
What I really need is the full result of (select 1,2,3,4,5 from dual) or (select 6,7,8,9,0 from dual) if a condition as a result of a different sql-statement is true or false. It doesn't matter if the solution uses "case when" or anything else.
I am using oracle 10g i have a table on my computer that i made for a friend when i load it on their computer the select statements say no data found if i use select * from table name all the data will show
if a column name select * from table name where duty_date = '05-JAN-11'no data found
We have and Upper and a Lower function.Is there any function or way in which I can issue a select while ignoring the case(like IgNoReCaSe) in a where clause? I don't want to use like
select * from emp where upper(job)= upper('dba');
or
select * from emp where lower(job)= lower('dba');
I just want to know if there is any way in which I could do it without using upper and lower.
I have the folloiwng two queries:
Query_1: select count(*) yy from table1;
Query_2: select count(*) zz from table2;
I need to compute the following:
var:=(yy/zz)*100
How can I achieve this in a single query?
I am importing some data from Oracle into another database on a regular basis. It works fine for most of the queries but couple of queries don't work sometimes (random). I don't get any errors or any data.
We switched on the Oracle auditing to find out the queries being sent to oracle db. We can see all the queries in the Audit log. Is it possible to configure Auditing to get the "Number of Rows" returned by Select statements so that we can be sure that some data was returned.
I have a query that will either return one record or zero records. When it returns zero records I want to replace my attributes with a sentinel, like 'N/A'. I tried the CASE statement but couldn't get anything to work
Sample (does not work):
select
(case when exists (select product from tbl_product where productid = '123') then product else 'N/A' end) product
from tbl_product
where productid= '123';
If one record exists it should produce: 'My Widget' (or whatever)
If zero records exist it should produce: 'N/A'
The query has a case statement in the where clause so that results can be filtered. If I pass "ut" for sso_id then the query returns 21 rows. If I remove the case statement and hard code "a.sso_id like lower('ut'||'%')" then the query returns 41 rows. The query should be returning 41 rows all the time.
Problem:
When passing "ut" as an SSOID parameter to the Procedure the query returns 21 rows.Taking the query and hard coding "a.sso_id like lower('ut'||'%')" the query returns 41 rows.
Result:
query should be returning 41 rows when "ut" is passed an an SSOID parameter.
Returns 21 rows
procedure SSO (SSOID in varchar2 default null,
Name in varchar2 default null,
Campus in varchar2 default null,
Department in varchar2 default null,
[code]...
Returns 41 rows
open Results for
select a.sso_id,
(a.name_last||', '||a.name_first) as name,
b.site,
[code]...
Test Data
CREATE TABLE ID
(
SSO_ID VARCHAR2(60 BYTE),
NAME_FIRST VARCHAR2(100 BYTE),
NAME_LAST VARCHAR2(100 BYTE),
[code]...
Test Data
CREATE TABLE NT
(
LOWER_NT_ID VARCHAR2(60 BYTE),
DEPARTMENT VARCHAR2(100 BYTE),
[code]....
i was just looking to find out how it is possible to select * from a sub select that has data coming from 2 tables.
For example:
select *, count(*) AS Count
from
(
select ....does not work, but i am not sure how i can select all fields from the sub query.