I'm trying to create a relation from child block to the master block that I've created . Foreighn key is there from child to parent table.The error I get is below:
FRM-15004: Error while parsing join condition
The join condition is correct, but I'm still clueless as to what it could be.Is it a form bug?
I receive a "FRM-15004 Error while parsing join condition" when attempting to create a relation between block1 (parent table) and block2 (child table). If I do a simple straight join the statement is accepted but if I use a Decode then it results in an error. How to successfully use a decode or a nvl in a join statement of a relation?
Results in Error:
block1.case_id = block2.case_id and
decode(block1.employee_id, null, block1.entity_id, block1.employee_id) =
decode(block2.employee_id, null, block2.entity_id, block2.employee_id)
This join is accepted but I would like to use a decode since a record can have either a employee_id or entity_id, not both
block1.case_id = block2.case_id and
block1.employee_id = block2.employee_id and
block1.entity_id = block2.entity_id
i want to update record that is fetched based on join condition on form
1. made a block manually :::: EMPSAL
2. Query DATA SOURCE NAME :::: EMP a, Sal b
3. Where Clause :::: a.empid = b.empid
4. DML DATA Target Type :::: Table
5. DML DATA Target Name :::: EMP a, Sal b
6. All Columns are marked a.empid, a.empname, b.sal, b.date etc
It does not allow me to update record.
create table ptab(pid number);
create table ctab(aphone varchar2(20));
drop table ctable
create table xtab(pid number,phone varchar2(20), tel1 varchar2(20), tel2 varchar2(20), tel3 varchar2(20))
insert into ptab values(1);
insert into ptab values(2);
insert into ptab values(3);
insert into ptab values(4);
[code]..
i have 3 tables, xtab, ctab and ptab
join condition
ptab.pid = xtab.pid
and
--------------------------------------------------------------------------------
what I want the join between xtab and ctab is, aphone should match with phone, and then tel1, then tel2, and then tel3, (if phone, tel1, tel2, tel3 are not null in that order only), if aphone matches with any of these,then just print that particular pid, important point is, aphone should be checked against phone, tel1, tel2, tel3 that order only
so the results should simply print
pid
1
2
3
4
5 should not be printed here because for pid 5 in xtab, none of the phone numbers match with aphone of ctab
I tried this:
select
DECODE (ctab.aphone,
xtab.phone, 1,
xtab.tel1, 1,
xtab.tel2, 1,
[code]...
but i cannot join ctab and ptab, i dont want to use intersect etc, because we are looking at millions of rows here
Suppose I have two tables
Transaction
TXN_ID:integer
TXN_DATE:date
Return_Transaction
RET_TXN_ID:integer
TXN_ID:integer
RET_TXN_DATE:date
[code]....
Transaction may have returned transactions. We use outer join to join the tables using TXN_ID. We have a report that shows the following data...The report use the following basic query to check all transactions with returned transactions information...Quote:
SELECT t.txn_id,
t.txn_date,
rt.ret_txn_id
FROM TRANSACTION t,
return_transaction rt
WHERE t.txn_id = rt.txn_id (+)
Result
TXN_ID, TXN_DATE, RET_TXN_ID
100, 2010/03/10, 500
102, 2010/03/11, 501
If user want to check all transactions with no returned transactions, a where clause is appended to the query
Quote:
SELECT t.txn_id,
t.txn_date
FROM TRANSACTION t,
return_transaction rt
WHERE t.txn_id = rt.txn_id (+)
AND Nvl((SELECT 1
FROM return_transaction rt
WHERE t.txn_id = rt.txn_id),0) = 0
[code].....
I Require to Update the Data in Join Condition. When Run the Query the Error display as ORA-00933: SQL Command Not Properly Ended.
Query:
Update a set a.Dr_Re = Nvl(b.Dr_Amt,0),
a.Cr_Re = Nvl(b.Cr_Amt,0)
FROM xxsc.xxsc_creditors_aging_brnwise a
join (Select Branch,Invoice_id,vendor_site_code,segment1,
case when (sum(nvl(dr_re,0)) - sum(nvl(cr_re,0)) > 0) then sum(nvl(dr_re,0)) - sum(nvl(cr_re,0))
Else 0 End DR_AMT,
[code]........
How to use outer join condition in my below query.In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more recordsin the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records. I want all the records from
APPS_JP.GEDIS_OFFER_HEADER goh including other conditions.I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result. [code]SELECT GOH.ORIG_SYSTEM, gsp.USER_NAME, goh.ORDER_NO, goh.OMEGA_ORDER_NUMBER, goh.ORDER_TYPE, gc.CUSTOMER_ID, gc.OMEGA_CUSTOMER_NUMBER, CASE WHEN gc.PRIVATE = 'N' THEN gc.CUSTOMER_NAME ELSE ''
[code]...
i have a query that is not working properly. i am trying to join two tables and i have OR condition and outer join..i am getting error ORA-01719: outer join operator (+) not allowed in operand of OR or IN..my query is as follow
SELECT l.* FROM table1 l, table2 map
WHERE (NVL(l.id, '-99') = NVL(map.id(+), NVL(l.id, '-99'))
AND l.TYPE = 'TKE')
) OR
(NVL(l.id, '-99') = NVL(map.id(+), NVL(l.id, '-99'))
[code]....
)So basically in the query above i am saying that if type ='TKE' dont do the join on all the pos columns. if type is not TKE then do all the joins on all the pos columns etc.how can i rewrite query so that i can use OR and the outer JOIN in same query?
I have an outer join.
select *
from table a, table b
where
a.id = b.id (+) and
b.status = 'N';
I am not getting any results I want where the table b is null for table a due to the last condition. I would like the result to be like the one below.
Results:
Table a ID Table b ID Table b status
1 1 'N'
2 null null
I have encountered a weird (or maybe not weird at all but unexplainable from my point of view) behavior from Oracle. I have simplified the example as much as possible
This query returns 2 rows as expected:
with edited as
(select F101, e_id from (select 'Test' F101, -1 e_id from dual
union all select 'Test1' F101, -2 e_id from dual) input_clob),
distinct_intermediate_edited as
[code]...
But this one (with only one row in input_clob) returns one row (as expected) but with null on e_id (why?):
with edited as
(select F101, e_id from (select 'Test' F101, -1 e_id from dual) input_clob),
distinct_intermediate_edited as
(select e.f101, e.e_id
from edited e
[code]...
If I change the join condition with and nvl(e.E_id,0) = nvl(e_id,0) both cases work as I expect (e_id = -1 for second query) but I simply want an explication for this behavior.
I have two permanent tables. I want to add the column DELTA_STROM from the table "Delta" into the table "TEST2". Here, the value of the field "POWER_DELTA" in the table "TEST2" depends on the field "Trade_Date".
If the time of the timestamp in table "Test2" is smaller than 12:40 than the value (DELTA_STROM from DELTA) of the day must be added into the field. If the time is huger than 12:40, the value of the next day must be added into the field "POWER_DELTA". All values for "Power_DELTA" for every day are in table "Delta" in the field "DELTA_STROM".
I just added the right values of "Power_Delta" into the table "TEST2" manually to give an understanding.
DATUM DELTA_STROM
-------- -----------
01.01.12 1.92
02.01.12 5.78
03.01.12 0.73
04.01.12 2.84
05.01.12 11.41
06.01.12 -2.76
07.01.12 0.43
08.01.12 1.25
09.01.12 -0.21
TRADE_DATE POWER_DELTA
---------------------------- -----------
02.01.12 11:21:41,720000000 5.78
02.01.12 12:44:01,236000000 0.73
02.01.12 14:05:01,845000000 0.73
02.01.12 16:21:01,345000000 0.73
02.01.12 17:25:41,470000000 0.73
03.01.12 10:31:01,376000000 0.73
03.01.12 11:55:11,798000000 0.73
03.01.12 16:32:47,612000000 2.84
04.01.12 08:24:01,486000000 2.84
04.01.12 12:24:21,189000000 2.84
04.01.12 17:46:21,123000000 11.41
CREATE TABLE "TEST2"
("TRADE_DATE" TIMESTAMP (6),
"POWER_DELTA" NUMBER
);
[Code]....
How to use outer join condition in my below query. In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more records in the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records.
I want all the records from APPS_JP.GEDIS_OFFER_HEADER goh including other conditions. I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result.
SELECT GOH.ORIG_SYSTEM,
gsp.USER_NAME,
goh.ORDER_NO,
goh.OMEGA_ORDER_NUMBER,
goh.ORDER_TYPE,
[code].......
I have two tables. i need to join the tables. The query is -
select v.c_venditore,v.s_venditore,v.t_diretto_indiretto,v.d_disattivazione,d.s_direzione from VENDITORE v,DIREZIONE d
where v.p_direzione=d.p_direzione order by v.s_venditore
In the table VENDITORE there are 2919 rows. I need to display all the rows. But the joining column p_direzione has some null values.I need to display the null also. But to join the two tables this is the only condition. How can i display all the rows.
I've created a query so I can easily compare two sets of data for two different instruments:
select a.CalId, a.AtName, a.NRef, a.VaLoat, a.ValTime, a.ValRing,
cvs.NRef, cvs.CalId, cvs.AtName, cvs.VaLoat, cvs.Valtime, cvs.ValRing
from CalcAttribute a, CalcAttribute cvs
where a.NRef like '438815' and cvs.NRef like '438813'
and a.CalId *= cvs.CalId
and a.AtName *= cvs.AtName
union
[Code]...
This works great - however I want to add an addtional condition, basically so it only returns where the two are not equal.
I thought I should just be able to add an extra:
and a.ValLoat *<> cvs.ValLoat
and a.ValLoat <>* cvs.ValLoat
But it doesnt seem to like this (Incorrect syntax near '<'.)
For a hash join statement, is it beneficial to have the join condition objects in the index as well as the objects in the where clause?
View 19 Replies View RelatedI have two tables. By joining these two tables, I need to update a field in table1.
UPDATE table1
SET table1.FLAG = 'Fixed'
where table2.lastname = table1.lastname
and table2.status in ('fulltime','parttime')
I keep getting error 'table1.lastname' is invalid identifier.
I can't understand the error message. I made sure that the fields exist.
Create a Report based on Join Conditions.
Eg.
1st Query : Select * from Emp
2nd Query : Select * from Dept
Join the Relation from 1st Query to Second Query
Apply following conditions:
a) if comm is null then hide the corresponding row
b) If sal is greater than average salary of there dept the display above average else display below average in the place holder column.
The attachment contains the table info. The condition is that when there are childer for the master ,the master record shd be negated . Excuse me if this very easy. Example -DEL HAS children so the record with DEL and DEL SHD not be in the result query. Example -RAG HAS NO children. so the MASTER record should be taken.
Input
COL1COL2COL3COL4
MASTERDELDELP1
MASTERDELJANP2
MASTERDELAGRP3
MASTERRAGRAGP1
MASTERCENAPTP2
MASTERRUGRUGP1
My expected output
COL1COL2COL3COL4
MASTERDELJANP2
MASTERDELAGRP3
MASTERRAGRAGP1
MASTERCENAPTP2
MASTERRUGRUGP1
I am loading content of an XML file into a table using SQL loader.Below is my Control file script -
LOAD DATA
INFILE *
INTO TABLE xx_cc_response_xml_stg TRUNCATE
xmltype(XML_DATA)
FIELDS
( COLUMN_ID constant 1,
file_name filler char(4000),
XML_DATA LOBFILE(file_name) TERMINATED BY EOF)
BEGINDATA
B2B_MasterDataUpdate_20120906152137.xml
------------------------------------------------------------------------------------
The file B2B_MasterDataUpdate_20120906152137.xml is correct and XML is well formed.When i try to query for XML_DATA (datatype XMLType) column in the table, i cannot see any content in the record, and it appears as (XMLTYPE)When I parse this XML using the below,
select value(d)
from xxnbn_cc_response_xml_stg a,
table(xmlsequence(extract(a.xml_data,'/InventorySearch'))) d;
------------------------------------------------------------------------------------
I get this error:
------------------------------------------------------------------------------------
ORA-00600: internal error code, arguments: [qmcxdsSelf4], [], [], [], [], [], [], [], [], [], [], []
00600. 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"
*Cause: This is the generic internal error number for Oracle program
exceptions. This indicates that a process has encountered an
exceptional condition.
*Action: Report as a bug - the first argument is the internal error number
------------------------------------------------------------------------------------
I am trying to create an EXT table but is constantly having the following problem, not sure why. I have done a few checks and used the scripts used as a standard but still is experiencing an error.
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "minussign": expecting one of: "double-quoted-string, identifier, single-quoted-string"
KUP-01007: at line 9 column 1
The Table creation script is
CREATE TABLE TABLE1_EXT
(
BUSINESS_DATE VARCHAR2(50 BYTE),
CIN_CODE VARCHAR2(50 BYTE),
CIS_CODE VARCHAR2(50 BYTE)
)
[code]....
And the data used as a sample is
BusinessDate|CIN|CISCode
19062012|1000026697|CTTGLIE
19062012|1000079416|Z29MBGB
I ran the following control file in sql loader:
LOAD DATA
INFILE "gateway.csv"
truncate
INTO TABLE GATEWAY
Fields terminated by ","
Optionally enclosed by '"'
trailing nullcols
[code]....
and I got the following error:
zcyds891:/opt/oracle> sqlldr gwcem/gwcem@pfs control=gateway.ctl log=/tmp/ldr.log bad=/tmp/bad.log
SQL*Loader: Release 9.2.0.8.0 - Production on Tue Dec 7 05:07:59 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL*Loader-350: Syntax error at line 12.
Expecting "," or ")", found "INTERGER".
GATEWAYPROTOCOL INTERGER,
^
The current OS is Solaris, SunOS 5.10.
I receive the following error message
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "identifier": expecting one of: "binary_double,
[code].....
when I select count(*) on the external table created below.
SQL> CREATE TABLE cac_500_load
2 (
3 EMAILADDRESS VARCHAR2(80),
4 FIRSTNAME VARCHAR2(60),
5 LASTNAME VARCHAR2(60),
6 STREETADDRESS VARCHAR2(100),
[code].....
Here is the db version info:
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME
--------------- ----------------
HOST_NAME
----------------------------------------------------------------
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
We are doing select statements. I have 3 tables that I need to get information out of and I believe I need to use a join but everything I put into oracle gives me an error.I'm doing the selects for a pharmacy and have a customer table, a drug table, and a prescriptions table.
I need to write a select statement that shows what customers are taking what drugs and how many mgs they take
customer_id,
customer_first_name,
customer_last_name,
drug_id,
drug_name,
prescription_unit
i think i need that information for the select but I cant seem to write a select statement that runs without errors.
When executing a SELECT with JOIN in oracle error as I am having the title. If I change the JOIN to where the procedure works normally. When installing my application, it works normally for a day or two, then it only shows the end of communication error. What I do is select the following:
SELECT /*+ FIRST_ROWS(10) */ TM1.EsqCodigo, TM1.EsqDescricao, TM1.EsqTipo, TM1.EsqConector, T2.ACnDes, TM1.EsqStatus, TM1.EsqVersaoNfeRecepcao, TM1.EsqVersaoArqNfeRecepcao, TM1.EsqVersaoArqNfe, TM1.EsqVersaoProcNfe, TM1.EsqVersaoNfeRetRecepcao, TM1.EsqVersaoArqNfeRetRecepcao, TM1.EsqVersaoNfeCancelamento, TM1.EsqVersaoArqNfeCancelamento, TM1.EsqVersaoNfeInutilizacao,
[code]...
i want to know that how can i use like operator with if condition. i m using oracle10g form builder and it's for search purpose .
for example ...
if search string=string2 then
message('Record found');
end if ;
i want to use like '%search string%'.
I am working on forms 6i. I have set where condition in pre-query of a trigger, my requirement is, in post-query, i want to delete the where condition.
pre-query:
set_block_property('HEADER_S',default_where,'STATUS IN (select meaning from XXSMCQSS_LOOKUP_VALUES where lookup_type=''CONCESSION STATUS CODES'' and primary_flag=''N'' )');
post_query: I want to delete this where condition, i just want make execute query normal by removing the where condition.
After committing form i want to clear few item and retain few item and make the form ready for next record to be inserted along with retained item.
View 4 Replies View RelatedI am working on 6i reports.I have below scenario to achieve.
I have FIND window and MAIN Window.
FIND Window: contains EMPNO, ENAME,and FIND button.
MAIN WINDOW: EMPNO, ENAME, SAL, JOB
If i enter something in FIND window, by clicking FIND button, it will populate data in MAIN window.I have below query in WHEN BUTTON PRESSED TRIGGER.
declare
cursor c1 is select empno, ename, job, sal from emp
where empno=nvl(:FIND.empno,empno)
and ename=nvl(:FIND.ename,ename)
begin
--here i am populating data into MAIN window block
end;
It's working fine.
REQUIREMENT: i want to pass where statement dynamically. Let us say if i pass only empno in FIND window, i want to pass 'WHERE empno=:FIND.empno' to existing select statement [I will keep select statement same without where condition]
If i pass empno and ename both, i want to pass 'WHERE empno=:FIND.empno and ename=:FIND.ename.
How to pass where condition to existing select statement based on parameters we pass in FIND window.
I am working on Forms 6i. I have data block A on table EMP.
Datablock A: Empno, Ename, Hiredate
I have FIND Screen: EMPNO, HIREDATE_FM,HIREDATE_TO and FIND Button.
I will search the records through FIND Screen.
I want to set the where condition of block A in pre-query trigger.
set_block_property('BLOCKA',default_where,'HIRE_DATE BETWEEN FIND.HIREDATE_FM and FIND.HIREDATE_TO');
Note: FIND in above is FIND Screen block.
It's not fetching any records, i doubt that there is syntax error in above statement.
I have master detail datablocks. Master block is course and detail block is trainee. students can schedule their courses in a location at particular time.
lets assume student1 has scheduled course A1 in location LA1 from 9am to 12 pm. Now second student shouldn't be able to schedule same course at same time in same location. He can schedule at different time duration. or else same time duration but different location. Or same time, same location but different course.
so, what i did is, i wrote code in when-validate-record of trainee block to display a message saying " cannot schedule course.choose another time." if he try to insert same time duration or same location .
when i am trying to insert a record with time which is already scheduled and in same location, it displays the message but it is also saving the record. i don't want to save the record.
how should i do this? i tried to give ROLLBACK in this trigger but it doesn't accept. i tried pre-insert trigger also but it is also displaying message but saving the record
my code in when-validate-record is:
declare
cursor c1 is
select start_time,end_time,loc
from trainee
where cname=:course.cname;
[code].......
