Secure Backup :: OSB Catalog Backup Is Getting Fired On Associated Media Family
Jul 23, 2012
We having OSB 10.4 on Solaris 10 with SL 24 TL Auto loader ( Tapes doesn't having Bar-code ), while firing file system backup (Sol 10 is the client OS) , it is hanging . and i have logged in to TL console then it shows loading and unloading. while OSB catalog backup is getting fired on the associated media family.
We are exploring Oracle Secure Backup in our environment as legato networker alternative. But RMAN backup in OSB is very slow due to sbt wait event (sbtwrite2). it can backup 5GB/hour. We think this not normal behavior. we have checked network throughput between media server and client server. It can send 50 GB data by 30 min.
I have a lot of uncompressed backup. How can I compress it?
List of Backups =============== Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag ------- -- -- - ----------- --------------- ------- ------- ---------- --- 304 B 0 A DISK 01-OCT-12 1 1 NO BACKUP_DPCTRDB_000_100112093432 305 B 0 A DISK 01-OCT-12 1 1 NO BACKUP_DPCTRDB_000_100112093432 306 B 0 A DISK 01-OCT-12 1 1 NO BACKUP_DPCTRDB_000_100112093432 308 B 0 A DISK 01-OCT-12 1 1 NO BACKUP_DPCTRDB_000_100112093432 309 B 0 A DISK 01-OCT-12 1 1 NO BACKUP_DPCTRDB_000_100112093432
I need to restore entire database(sp+control+datafile) to new host.I have started the instance with nomount( and it has created a dummy parameter file).Now, I need to fire the command to restore spfile.
RUN { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='...'; RESTORE SPFILE TO PFILE '?/oradata/test/inittrgta.ora' FROM AUTOBACKUP; SHUTDOWN ABORT; }
My questions:-
1.How will RMAN find the location of backupset(Since there is controlfile for neither target or catalog database)?
2.How does RMAN reache the backupset in case of a)tape b)disk?
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of crosscheck command at 06/30/2012 14:25:12 ORA-19554: error allocating device, device type: SBT_TAPE, device name: ORA-27211: Failed to load Media Management Library
RMAN> configure default device type to disk;
old RMAN configuration parameters: CONFIGURE DEFAULT DEVICE TYPE TO DISK; new RMAN configuration parameters: CONFIGURE DEFAULT DEVICE TYPE TO DISK; new RMAN configuration parameters are successfully stored
RMAN> show all;
RMAN configuration parameters are: CONFIGURE RETENTION POLICY TO REDUNDANCY 1; CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa [code]....
We have OSB 10.44 installed on 64 Bit Red Hat OS. Is working pretty fine with a Virtual Library that is configured in an Storage Box. Now we have acquired a Physical Storage and we want to duplicate the backups already taken by the Virtual Library into the new Physical Library.
We have 20 drives for the VTL and for the physical we are planning to have the same to duplicate all backups from VTL. That is being done in case Emergency Failures, so we can restore from Physical Library in case the VTL fails.
The question is: Is there any documentation on how to do duplicate backups.?
The duplicate backups copy wont be done in real time. They will be done after the backup is finished in the VTL and then will start the copy in the physical library.
I have a database for which I use RMAN for backup & recovery. The database is in archivelog mode. Online redo log files are multiplexed and I have more than one destinations for archive logs. If, due to a disk crash, all data files and redo log files are gone - and I have archive logs, one member of each redo log group and a full database backup available, I can recover till the last archived log. But I want to ask that what about the transactions which were not archived at the time of media failure? How can I recover committed transactions which were not archived at the time of crash, and I have a mirrored copy of log group which was current at the time of failure?
We are trying to use the SFTp transport in OSB 11g. Did the setup as mentioned in the documentation.The SFTP server is hosted on linux machine and using the user password mechanism.
We are reading a file using the ftp adapter and routing to the business service that is based on sftp.The file is picked up properly by proxy but while sending the file through SFTP, we are facing the following error.At the source and destination ends, the directories have the full permissions as required.
BEA-381801
Caused By: com.bea.wli.sb.transports.TransportException: No such file at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:198) at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:110) at sun.reflect.GeneratedMethodAccessor1005.invoke(Unknown Source)
Oracle Back up is showing library Dell PS 6100E as unsupported device and can not retrieve any information from it, can not ping and can not verify both from obtool and web tool. Using Linux. I can ping from outside and see the device config using lsscsi. But obtool and webtool fails. Is it really unsupported ? In the
$ORACLE_Backup_Home/device/device_robots I see some PV122T, PV124T
We would like to used Oracle secure backup using SAS interface on an IBM Autoloader Model TS-2900. Would it be possible to configure oracle secure backup using SAS?
New to oracle FAQ. I'm interested in oracle, waiting to explore more Technic's in 10g with a proper guidance. Hope i'm in the right place.Here is my question.
I need steps for configuring rman cloning with catalog & without catalog.were in prod db the source is in /u01 & in auxiliary db the client want in /u05. how to do it. here i have recreate control file or not
starting full resync of recovery catalog RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of allocate command at 02/18/2013 05:00:06 RMAN-03014: implicit resync of recovery catalog failed RMAN-03009: failure of full resync command on default channel at 02/18/2013 05:00:06 ORA-02291: integrity constraint (REPOSDB.ORL_F1) violated - parent key not found
we have a cluster of two nodes having oracle 11G R2 and another single instance server where RMAN is configured and this is backup server.i have created the service between the the target database and backup server and they are working fine i.e tnsping work fine at both sites.Now i have physical backup scripts written at one of cluster node and scripts run at crontab. The backup include full_backup , archive backup etc.
Now all physical backups work fine that is connecting RMAN and then catalog and then complete the backup but the full_backup do not connect catalog and throw this error that it do not know the SID in the connect descriptor. the tnsping output (from target ) is as followed fedb112 # tnsping bkp
TNS Ping Utility for Solaris: Version 11.2.0.1.0 - Production on 24-JAN-2012 14:11:45 Copyright (c) 1997, 2009, Oracle. All rights reserved. Used parameter files:
Used TNSNAMES adapter to resolve the alias
[code]...
in above scripts " connect catalog rcowner/rcowner@bkp " do not connect while i have other two scripts for incremental backup and archival backup, have the same code but they connect successfully and this one do not
now i run lsnrctl status at backup server , as follows
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 24-JAN-2012 13:49:44
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.x.x.x)(PORT=1521))) STATUS of the LISTENER ------------------------ Alias LISTENER
[code]...
why it do not connect to RMAN catalog and use control file instead for backup
We are having 2 DB's on separate servers but both the DB is having same DBID and NAME. Also both the backup is planned to execute from one rman catalog DB.
Will the catalog DB confuse, when we execute backup for both the DB at same.
Database version : 11.1.0.7 Applications R12 (12.1.3) Operating system : Redhat linux 5.5
I would like to know how to create recovery catalog database to acheive rman backups as control file will not keep backup info longer. This is for our production database what are the requirements before doing so and what happens to configure retension policy to recovery window.
Initially plan of taking backup to disk and later moving backups to tape device
When we run a backup of a database [oracle7.3.4.5] using EBU [2.2.1.0.0] on Solaris 7, error message appears:
Statement processed. BFS in progress "1134684df1de4a" cancelled on 10-JUN-2011 11:05:34 BFS in progress "1134694df1de4a" cancelled on 10-JUN-2011 11:05:35
Ending backup to tape
This backup spawns archive sequence numbers 1731 to 1731 This backup comprises SCN 8725981 to 8725802 EBU-2003: Job 24267 failed due to an internal error on 10-JUN-2011 11:05:52 [ 7178 : brcdodbfil ] [cod]....
In EBU catalog, are registered 2 databases with the same name but different hosts.
We have production database and standby database in 11g.
Production db server is taking care by different team even I don't have any access of the production server and I am responsible only for standby server. As of now everything is working fine except database backup on standby server because standby server is not register in catalog.
How to register standby server in catalog for RMAN backup?
On production server i have the production database and i have another instance for recovery catalog database.and on DR server i have only one instance for production database .In the scenario of recovery,
- i did export for recovery catalog user - i have latest rman backup for production database
On the DR server as i mention up , i have only on instance , my question is , i need to create another instance for recovery catalog user to import it ? or on the same target database on DR i can import the recovery catalog ?
I want to remove matching dbid's from the rman catalog without compromising te integrity of the catalog. I do however know a single way of removing them and its using the dbid and db_key which in my case are not not unique. The funny thing is they've running normally for a year now.