i want to fetch records of emp whose hiredate between 1 sep to 30 sep of any year. i am using the below query but it show me wrong results.
select * from tran where to_char(timestamp,'DD-MM') between '01-SEP' and '30-SEP'
Using 11gR2, windows 7 client machine. I need to update the table missing_volume (below), where I need to calculate the estimated_missing column. The calculation of estimated_missing column for current month needs previous month numbers (as commented inside the code below). I want the output like the first table. Notice the records start from January, hence estimated_missing for January can't be calculated, but for the the rest of the months it can be done by simply changing 'yr' and 'mnth' (commented inside the code towards the end).
yr mnth location volume actual_missing expected_missing estimated_missing
---------------------------------------------------------------------------------------------------------------------------------
2013 January loc1 48037 24 57
2013 February loc1 47960 3660 53 24
2013 March loc1 55007 78 57 28
2013 April loc1 54345 72 58 77The code:
UPDATE missing_volume g
[Code]....
The code does calculate correct number for 'estimated_missing' as I run the code for each month, but the problem is while updating the current month it also erases the record for previous month. E.g. as can be seen below, after I updated April the column only has the record for April, previous month record is gone, similarly updating March removed February, etc. I can't understand why it's happening!! Here is the output I get:
yr mnth location volume actual_missing expected_missing estimated_missing
---------------------------------------------------------------------------------------------------------------------------------
2013 January loc1 48037 24 57
2013 February loc1 47960 3660 53
2013 March loc1 55007 78 57
2013 April loc1 54345 72 58 77
why it's happening (I mean where is the flaw in the code) and how to get the desired output (first table).
i want to get the last month starting from today onwards.
1) select the record of last month that is if this month is june then select the record for 1st may to 31st of may
declare
cursor c1 is select distinct edt, regno, name, desgn, form_no, form_status, recd_on
from ol_registration_vu
where RECD_ON between :control.REC_FROM and :control.REC_TO ;
[Code]....
this coding giving me only one record i.e the last record of the table, whereas the table has 50 records. how can i get all records from the table in the form datablock.
i create form in which first block is non database having 2 items from_date and to_date and one button is there.when i click on button i.e when button pressed new window is open having new database block
i write code on when button pressed
HIDE_WINDOW('XX_RFQ_FIND');
SET_WINDOW_PROPERTY('XX_RFQ_FIND', visible, property_false);
SHOW_WINDOW('XX_RFQ_ACKT');
GO_ITEM('LE_NAME');
SEARCH_REQ;
[code]...
my problem is that when i click on button i fetch only one record
have a req like below
CREATE TABLE TEST_BRK
( EMP_ID VARCHAR2(20),
BEG_DT DATE,
END_DT DATE,
DEPT_CODE VARCHAR2(10),
[code]...
COMMIT;i need to break down the each member range by record per month and make a record as first day of that month . and dept and branch should have the same value as what the value it was in the range of source.
excepted ouput like below
EMP_ID MONTH_DAY_1 DEP_CODE BRANCH
AAAA 01-JAN-2010 02 A
AAAA 01-FEB-2010 02 A
AAAA 01-MAR-2010 02 A
AAAA 01-APR-2010 02 A
AAAA 01-MAY-2010 02 A
AAAA 01-JUN-2010 05 B
AAAA 01-JUL-2010 05 B
.how can i code the logic to get my expected output above
i want to fetch the data in my form from table, by using item_code.
eg when i write the item_code its value get matched in same table and fetch the another
columns by item_code.
I have a form on a table that allows me to edit, delete, or create records. If I choose to edit a record from the report the form get populated correctly and edits or deletes work fine. My problem is when I choose to create a new record. I get a blank form which is what I want, but once I fill it out and click the create button, the automated row fetch fires again and gives me a no data found error. How do I get it to not fire when the create button is pressed?
View 2 Replies View RelatedI have made a travel booking system which comprises of 3 forms
1)Travel Booking form
2)Reservation Form
3)Cancellation Form
Under one booking number i can add multiple users in which they can have there multiple travels.
Users can cancel there individual travels under a prescribe booking number which on doing the Cancel flag turns to 'Y'.
What i want is, If a user is cancelling his/her travel under any booking number then while retriving the records in Travel Booking form, the travels which are cancelled should not be in enable mode.
For one user there can be 4 travels out of which 2 are cancelled, how can i track only those records whoes cancel flag is set to Y. some logic to find it out. Else can i use :system.cursor_record. If yes, How to use it for this system.
I have an application connected to Oracle 11g that sends its own querys to the db based on what the user is clickng on. The applicaiton is connected via one user id and I was wondering, is there a way that I can capture the tiem each query starts, the sql itself, and the amount of time it took to fetch the data?
View 7 Replies View RelatedI have a requirement to list the data month wise dynamically where month data is also in the same table, hopefully the below posts should bring more clarity to my requirements.
1. Table creation:
Create table T1 (account_no varchar2(15), area_code varchar2(2), bill_month date, consumption number);
2. List table content:
select * from T1;
account_no area_code bill_month consumption
Q00001Q31-Jan-12125
Q00002Q31-Jan-1265
Q00003Q28-Feb-12219
Q00004Q28-Feb-12805
Q00005Q28-Feb-1254
Q00001Q31-Mar-12234
Q00002Q31-Mar-12454
Q00003Q31-Mar-12232
Q00004Q30-Apr-1221
Q00005Q30-Apr-12218
Q00001Q30-Apr-1254
Q00002Q31-May-1219
Q00003Q31-May-1287
Q00004Q30-Jun-12187
Q00005Q30-Jun-1278
so on......so on......so on......so on......
3. Expected output:
account_no area_code Jan-12 Feb-12 Mar-12 Apr-12 May-12Jun-12Jul-12Aug-12Sep-12Oct-12Nov-12Dec-12
Q00001 Q 125 548 2345487423154821518738721512
Q00002 Q 65 127 45487819357831585683152878
Q00003 Q 545 219 2328738735188745897313
Q00004 Q 78 805 1221218187885718387389787138
Q00005 Q 541 54 2621878778386538698182
With the conventional query I hope this is impossible,
FRM-40501: ORACLE error: unable to reserve record for update or delete.
ORA-24374: define not done before fetch or execute and fetch
My master-detail form has single canvas. For both blocks, master and detail, two tables joined together in each. One table to be updated, second table has some info for reference (query only).
I am getting these errors when in detail block the item from LOV is selected for existing record. This does not happen for new record inserted in detail block.
create or replace PROCEDURE newprocedur(outname OUT VARCHAR2,outroll OUT NUMBER) AS
CURSOR c1 IS
select Name,Rollno,Section from emp;
BEGIN
Open c1;
fetch c1 into outname,outroll;
Here out of 3 columns in cursor is it possible to fetch only two columns using FETCH like i did above?
How do i run three scripts one after another automatically for daily basis. Say i have three scripts A,B,C and i want to run the three scripts A followed by B followed by C.
View 7 Replies View Relatedhow to create a view from table which containes rows from every minutes. In view I want to select only rows at 15 or 30 minutes interval.
eg. my base table has 60 rows for 1 hour. The created view must contain 4 rows on 15 minutes interval basis at the boundary of that interval.
O/P of view should be like this.
Value Time
100 00:00:00
200 00:15:00
300 00:30:00
400 00:45:00
500 01:00:00
There are 2 databases, database A and database B. Database A is Oracle 11.2.0.2 which runs on linux and Database B is Oracle 11.2.0.2 which runs on windows xp machine. In database A, there are 100's of tables which are being updated every 10 minutes or 15 minutes. For reporting purpose, the developer wants to run report for the tables. But since database A is being updated every now and then, generating reports takes almost 15 to 20 minutes. So the reports can be generated in Database B. Once in a day the database B should have the updated data from database A so that the reports can be generated in database B with less time. What could be the best solution for the database B to have the updated data on daily basis from database A in oracle?
View 3 Replies View RelatedDB 10.2.0.2
OS Window Server
I need to create a script to take the oracle database backup on daily basis for windows. Which method will be good exp imp, rman or coldbackup?
In our case mostly chance system will crash and we need to OS install first and then restore the oracle home and full database.
I have a table which have two columns date on hourly basis and response time. I want to pull the previous date's data on hourly basis with the corresponding response time. The data will be loaded to the table every midnight.
eg: Today's date 23/10/2012
I want to pull data from 22/10/12 00 to 22/10/12 23
The below query is pulling the date as required but I am not able to pull the response time.
with a as
(select min(trunc(lhour)) as mindate, max(trunc(lhour)) as maxdate from AVG_HR)
SELECT to_char(maxdate + (level/25), 'dd/mm/yyyy hh24') as dates FROM a CONNECT BY LEVEL <= (1)*24 ;
How can we find a tablespace growth on a daily basis for a 11.2.0.2 database?
OS: AIX 6.1
We have a 2-Node RAC11g R2.0.3 installed on Linux 5.5.
My problem to have a private connection disconnected on daily bases at 12:00 PM and 3:00 PM ONLY,and come back life within 2 minuets,I am using cross-over cable to connect those private interface , So in the ocssd.log Stating :-
2012-09-18 15:06:43.735: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 50% heartbeat fatal, removal in 14.340 seconds
2012-09-18 15:06:50.752: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 75% heartbeat fatal, removal in 7.330 seconds
2012-09-18 15:07:19.821: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 90% heartbeat fatal, removal in 2.480 seconds, seedhbimpd 1
And the instance is restarted accordingly.
I need any good suggestion basically I have two different location
1- Factory
2- Head office
I have developed PRODUCTION module in factory and it is working fine and now I want to send data on daily basis to head office therefore I develop a form which will create backup in export format (.dmp) then user will send via email to head office.
Backup file should be save in pre-defined location then user will use a form which I developed for loading data into head office there are two different buttons in this form;
First is used to load data, actually first I load data in a temporary user which creates whenever user will press this button. Second is used to copy data in application user but first it checks if data exists then update otherwise insert.
i create form on which 3 window, 3 Canvas, 3 blocks are there.
1)first block contain 3 items from_date and to_date(nondatabase)and find button
2)second block contains 3 items segment1, quantity and payment_terms
when i enter 2 dates and click on find button 2nd window open. segment1 and quantity between this 2 dates comes from base table like
select segment1,quantity
from po_lines_all pll, mtl_system_items mts
where pll.ITEM_ID=mts.INVENTORY_ITEM_ID
and creation_date between :FROM_DATE and :TO_DATE
and payment_terms should enter manually
3)2nd block contains summary button when i click on it, it save segment1, quantity, payment_terms and open new window which contain segment1 ,qty, payment_terms and when i click on summary button data comes from custom table which group clause means
suppose
item qty terms
a 2 2days
a 3 2days
b 3 3days
then on third form i shows like this
a 5 2days
b 3 3days
i done all this things but problem is that
suppose once data between 21-aug-2010 and 24-aug-2010 comes on second form , i enter payment_terms and save it. sumaary form also run properly but if another user enter date between 22-aug-2010 and 30-aug-2010 then it will shows data between 21-aug-2010 to 24-aug-2010 from custom table i.e with payment terms as earlier it save and from 25-aug-2010 to 30-aug-2010 it shows data from base table
like
item qty terms date
a 2 2days 21aug
a 3 2days 22aug
b 3 3days 24aug
b 4 NULL(ENTER MANUALLY) 26aug
c 5 NULL 27aug
I want to adjust 2900 against certain amount from table on fifo basis.
DROP TABLE ABC
CREATE TABLE ABC(ID NUMBER PRIMARY KEY,AMT NUMBER);
INSERT INTO ABC VALUES(1,1000);
INSERT INTO ABC VALUES(2,2000);
INSERT INTO ABC VALUES(3,3000);
Can i do it using SQL. I know that it can be done using PL/SQL but i just wanted to confirm if its possible using SQL.
There is a table called cd_details. It has fields like id, name, language, type etc.I need a form where the user can search the database on basis of language and name and then display the other details. I used a data block wizard and given a push_buttonwith (execute_query). But it's very clumsy. For eg, if the user presses next the next button then all the records are being displayed. Is there any way to do this thing in a better way?
View 13 Replies View RelatedI need for each date sum the values from the begin of the year to present date. In January I will have the value of this month, on February I must sum the value of this month and the value of the month before, and so on, at the end of the year.
Date input
SELECT ID_CLIENT, DT_REG, VAL
FROM (
SELECT 1 as ID_CLIENT, TO_DATE('20100101', 'YYYYMMDD') as DT_REG, 200 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100201', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100301', 'YYYYMMDD') as DT_REG, 200 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100401', 'YYYYMMDD') as DT_REG, 150 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100501', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL UNION
SELECT 2 as ID_CLIENT, TO_DATE('20100101', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL UNION
SELECT 2 as ID_CLIENT, TO_DATE('20100301', 'YYYYMMDD') as DT_REG, 220 as VAL FROM DUAL UNION
SELECT 2 as ID_CLIENT, TO_DATE('20100501', 'YYYYMMDD') as DT_REG, 500 as VAL FROM DUAL UNION
SELECT 3 as ID_CLIENT, TO_DATE('20100201', 'YYYYMMDD') as DT_REG, 150 as VAL FROM DUAL UNION
SELECT 3 as ID_CLIENT, TO_DATE('20100501', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL);
Result
ID_CLIENTDT_REGVAL
101/01/2010200
101/02/2010300
101/03/2010500
101/04/2010650
101/05/2010750
201/01/2010100
201/03/2010320
201/05/2010820
301/02/2010150
301/05/2010250
I use windows 2003 server, oracle 10.2.0.4.0.My question is related to maintaing a standby database
1. Do we need to take RMAN full backup of standby database on a regular basis? At the moment I dont take backups of standby database.
2. I have FRA on standby database. The archivelogs from primary go to FRA on standby. I delete my archivelogs as follows:
DELETE ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE-3';
Though the archivelogs are delete there are still empty folders of archivelogs that are not deleted. How to get rid of them automatically.
can we use something like this
"select ... order by emp from emp"
what is to be done? so that this qurey runs. no co-related subquery to be used.
My procedure proc_ex is in when_validate_item trigger
I have one Multi Record data block in my form with values in its items
I need to Populate multi record block values to one Record Group using
add_group_row,
add_group_column,
set_group_char_cell to populate values to record group
Let us suppose my multi record data block looks like
item1 item2 item3 item4
10 20 50 70
25 15 30 45
45 90 47 38
75 25 85 90
30 56 78 80
how to populate these multi record datablock values to Record Group ???..Eagerly waiting for your Replies
I am loading data file using SQL Loader in TOAD 10.5.1.3 in Oracle 10g using the control file below and loading data into 2 tables post1.thead and post1.tdetl. THEAD contains item level transaction and TDETL is detail level when a transaction has a discount or promo attached to for that item. When the
LOAD DATA
APPEND
INTO TABLE post1.thead
WHEN (1:5) = 'THEAD'
TRAILING NULLCOLS
(file_type POSITION(1:5)CHAR,
[code]....
A particular THEAD value may have 0, 1 or many TDETL corresponding values.below is a sample data file. When the position 21 in the TTAIL has a value of 1 or 2, then we know that there is a promo or discount applicable to the ITEM (THEAD).
THEAD0000000002201109142011091400000000000002091 1 0 -1
TTAIL0000000003000000
THEAD0000000012201109142011091400000000000002091 1 0 -1 20110914-1
TDETL0000000013CMPSPL1004 0 000000010000P0000000000000019990000000000000000200000
TTAIL0000000014000001
THEAD0000000021201109142011091400000000000002091 1 0 -1
TDETL0000000022EMPDSC1005 0 000
TDETL0000000023SCOUP 1006 0 973452 000
TTAIL0000000024000002
What I want to acheive is to accurately reflect a TDETL to its corresponding THEAD, as both THEAD and TDETL are loaded into separate tables. How can we have the 2 records correlated?
I have a table which contains the multiple records for single ID No. Now i have to select single record which contains the latest date. here is the structure Name
Null Type ------ ---- ------------ ID_P NUMBER NAME_P VARCHAR2(12) DATE_P TIMESTAMP(6) Records---------------------1 loosi 22-AUG-13 01.27.48.000000000 PM1 nammi 26-AUG-13 01.28.10.000000000 PM2 kk 22-AUG-13 01.28.26.000000000 PM2 thej 26-AUG-13 01.28.42.000000000 PM
now i have to select below 2 rows how can write select qurie for this?
1 loosi 26-AUG-13 01.27.48.000000000 PM2 thej 26-AUG-13 01.28.42.000000000 PM