Data Guard :: Take RMAN Full Backup Of Standby Database On Regular Basis?
Jun 8, 2012
I use windows 2003 server, oracle 10.2.0.4.0.My question is related to maintaing a standby database
1. Do we need to take RMAN full backup of standby database on a regular basis? At the moment I dont take backups of standby database.
2. I have FRA on standby database. The archivelogs from primary go to FRA on standby. I delete my archivelogs as follows:
DELETE ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE-3';
Though the archivelogs are delete there are still empty folders of archivelogs that are not deleted. How to get rid of them automatically.
View 2 Replies
ADVERTISEMENT
Dec 6, 2012
I have to recreate my standby database due to huge archive gap. I have full datafile backup of primary.
View 24 Replies
View Related
Oct 9, 2012
I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .
If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .
View 2 Replies
View Related
Jul 25, 2011
I am trying to create the Standby database using RMAN.
I have first created an auxiliary instance followed by the password file for the instance and the registering it it listener.
Below are the parameters of the pfile of the standby database and followed by the command issued at the RMAN prompt.
PFILE parameters [STANDBY]
orcl.__db_cache_size=293601280
orcl.__java_pool_size=8388608
orcl.__large_pool_size=8388608
orcl.__oracle_base='F:appdsharma'#ORACLE_BASE set from environment
[code]....
View 3 Replies
View Related
Oct 19, 2011
How to create a standby database without rman and with the rman..?
View 1 Replies
View Related
Dec 21, 2012
creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
View 1 Replies
View Related
Nov 4, 2010
why RMAN is unable to create physical standby database ?
RMAN> connect auxiliary sys/system@DGREPL
connected to auxiliary database: DGREPL (not mounted)
RMAN> connect target sys/system@REPL
connected to target database: REPL (DBID=2730563515)
RMAN> run{
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
[code]....
View 19 Replies
View Related
May 9, 2013
I have Oracle database on Oracle 10g R2 with physical as well as logical standby database.
1) Is is necessary to take Physical standby database backup?
2) If 1) yes then Which RMAN backup is preferred?with catalog or default?How to take backup as different location?
3)how to Restore that backup?How to ensure backup is valid?
View 4 Replies
View Related
May 26, 2013
I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
View 5 Replies
View Related
Jul 1, 2012
Can i setup physical standby without RMAN? I want to create a fresh single physical standby without RMAN .. If i copy all files in another system and take the controlfile from primary as alter database create controlfile for standby ... and fill all the gaps with archives.. Should it work ? i am on 10G Rhel 4 linux.. and both machines would have same config
View 12 Replies
View Related
Oct 17, 2012
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
View 1 Replies
View Related
Nov 9, 2011
Environment:
oracle 10.2.0.1.0
Windows XP
I have taken the RMAN Full database backup through the following command.My database is in no archivelog mode.
AT RMAN prompt
Shutdown immediate;
Startup mount;
run
{
allocate channel c01 device type disk format 'd:
man_bkp est_%U';
allocate channel c02 device type disk format 'd:
man_bkp est_%U';
backup full database tag 'full_bkup_test_081111';
backup current controlfile;
backup spfile;
release channel c01;
release channel c02;
}
Now i have deleted my all controlfile and spfile/Pfile from the database.So how can i recover my SPfile and controlfile? i do not have autobackup on of SPfile/Controlfile.
View 7 Replies
View Related
Feb 15, 2013
I am running full database backup it take 10hrs to complete.
Size of the database=590GB
Platform:Solaris 9
database version:10.2.0.5
using catalog database.
Is there any way to reduce the time ?
Is there any query to see how long does the backup runs?Monitor the backup time?
View 5 Replies
View Related
Oct 1, 2012
How to clone database using RMAN FULL BACKUP on different machine? I do not wants to use DUPLICATE Command......
Is there any other way to clone DB? I am using Oracle 11g R1 on Windows Server 2007 (64 bit)
View 2 Replies
View Related
Oct 6, 2013
for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============RMAN-00571: ===========================================================RMAN-03009:
failure of sql command on default channel at 10/05/2013 18:15:12RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitchORA-01109: database not open Recovery Manager: Release 11.2.0.1.0Oracle databaes Release 11.2.0.1.0 64 bitOS:RHEL 6 x86-64 bit Secondly,
do I need to cancel manged recovery while taking rman backups on standby. I scanned thru MOS but could find solutions for rman with active DG.
View 3 Replies
View Related
Nov 6, 2013
I have a Primary database and Standby database both in ASM. Recently my archive logs got deleted and i am trying to recover my standby database with an incremental backup based on scn from primary database. But i face the below error when i recover the standby database with the incremental backup taken in primary database.
RMAN> recover database noredo;Starting recover at 06-NOV-13using target database control file instead of recovery catalogallocated channel: ORA_DISK_1channel ORA_DISK_1: SID=21 device type=DISKchannel ORA_DISK_1: starting incremental datafile backup set restorechannel ORA_DISK_1: specifying datafile(s) to restore from backup setdestination for restore of datafile 00001: +STDBY/11gdb/datafile/system.258.805921881destination for restore of datafile 00002: +STDBY/11gdb/datafile/sysaux.259.805921967destination for restore of datafile 00003: +STDBY/11gdb/datafile/undotbs1.260.805922023destination for restore of datafile 00004: +STDBY/11gdb/datafile
[code]....
View 4 Replies
View Related
Nov 15, 2013
I trying to backup archive logs using rman in standby database. I'm able to backup archive logs using simple command it get's successfully completed. rman > BACKUP ARCHIVELOG ALL When i'm trying to do with keep command it's getting failed.I'm trying to do on physical standby databaseBACKUP ARCHIVELOG ALL KEEP UNTIL TIME 'SYSDATE+100' TAG = 'TEST'.
View 1 Replies
View Related
Jun 12, 2012
We have production database and standby database in 11g.
Production db server is taking care by different team even I don't have any access of the production server and I am responsible only for standby server. As of now everything is working fine except database backup on standby server because standby server is not register in catalog.
How to register standby server in catalog for RMAN backup?
View 3 Replies
View Related
Jul 23, 2012
what are disadvantages, RMAN backup in DG over production?
is it appropriate to take RMAN BACKUP in DG?
View 16 Replies
View Related
Apr 22, 2011
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
View 2 Replies
View Related
Aug 30, 2013
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies
View Related
Mar 14, 2012
I want to get the execute plan of a sql in standby database(read only),but failed,how can i do?
SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access
SQL> select count(1) from hxl.tb_objects;
COUNT(1)
----------
22238018
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ ONLY
View 4 Replies
View Related
Mar 10, 2010
I have two node rac running on SAN with ASM , i want to configure a single instance standby database for this.
View 2 Replies
View Related
Jul 8, 2011
To have physical standby database, the hardware and software versions should be same, including patch sets?
View 3 Replies
View Related
Sep 17, 2012
DB1 <Primary> - Production
DB2 <Physial Standby> - DR
I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.
DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;
View 11 Replies
View Related
Sep 7, 2012
Oracle RDBMS 11.2.0.2 on RHEL 5.6.
I need to drop standby database completeley and rebuilt physical standby for the same database. We identified there are lot of inconsistencies between primary and standby. How do i need to remove the standby? And what is the best procedure?
View 2 Replies
View Related
Dec 7, 2010
I was able to create the standby database on different server with the same name for the primary and standby database but I want to know that can I create a standby database with different database name than that of the primary database server.
View 1 Replies
View Related
Jan 30, 2013
I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.
View 8 Replies
View Related
Jan 16, 2013
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
View 1 Replies
View Related
Jan 16, 2013
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
View 31 Replies
View Related
