Data Guard :: Recreate Standby Using Full Datafile Backup
Dec 6, 2012I have to recreate my standby database due to huge archive gap. I have full datafile backup of primary.
View 24 Replies
ADVERTISEMENT
Data Guard :: Take RMAN Full Backup Of Standby Database On Regular Basis?
Jun 8, 2012I use windows 2003 server, oracle 10.2.0.4.0.My question is related to maintaing a standby database
1. Do we need to take RMAN full backup of standby database on a regular basis? At the moment I dont take backups of standby database.
2. I have FRA on standby database. The archivelogs from primary go to FRA on standby. I delete my archivelogs as follows:
DELETE ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE-3';
Though the archivelogs are delete there are still empty folders of archivelogs that are not deleted. How to get rid of them automatically.
Data Guard :: Does Standby Redologs Are Applied Online To Datafile
Jul 20, 2011Till now i was pretty sure that standby redologs are applied to database without any delay, but everything looks that the process is different. i did on primary server table and add some records to this table.
Next i switch to standby and open redologs (with hex editor) to look for this "create table" and "insert" commands. and i succeeded. so this is prove that standby log are supplied by primary database.
Next i cancelled recovery process and open database in read only mode and there was no records in this standby db, moreover there wasn't any table on standby. so i started to be confused, because i suspected that this table and it content will be on standby database.
Next i started recover process again for standby database and do some switch log on primary server. after that i back to standby, cancel recovery process and open database in read only mode. there was table and contents for it.
so my question is:
does standby redologs should be applied online to database or they are only applied after promoting standby database to primary database?
it looks like contents only from archivelog is applied to standby database. it is correct?
database is 9i.
Data Guard :: Physical Standby Database Backup
May 9, 2013I have Oracle database on Oracle 10g R2 with physical as well as logical standby database.
1) Is is necessary to take Physical standby database backup?
2) If 1) yes then Which RMAN backup is preferred?with catalog or default?How to take backup as different location?
3)how to Restore that backup?How to ensure backup is valid?
Data Guard :: Restoring Logical Standby Rman Backup On Production
Oct 9, 2012I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .
If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .
Data Guard :: Applying Incremental Backup On Standby To Resolve Archive Log Gap?
Nov 6, 2013I have a Primary database and Standby database both in ASM. Recently my archive logs got deleted and i am trying to recover my standby database with an incremental backup based on scn from primary database. But i face the below error when i recover the standby database with the incremental backup taken in primary database.
RMAN> recover database noredo;Starting recover at 06-NOV-13using target database control file instead of recovery catalogallocated channel: ORA_DISK_1channel ORA_DISK_1: SID=21 device type=DISKchannel ORA_DISK_1: starting incremental datafile backup set restorechannel ORA_DISK_1: specifying datafile(s) to restore from backup setdestination for restore of datafile 00001: +STDBY/11gdb/datafile/system.258.805921881destination for restore of datafile 00002: +STDBY/11gdb/datafile/sysaux.259.805921967destination for restore of datafile 00003: +STDBY/11gdb/datafile/undotbs1.260.805922023destination for restore of datafile 00004: +STDBY/11gdb/datafile
[code]....
Data Guard :: Apply Standby Redo Log To Physical Standby Database
May 26, 2013I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
Data Guard :: Possible To Convert Logical Standby To Physical Standby
Aug 30, 2013My steps for testing as below:
1.create a primary database
2.duplicate a physical standby database;
3.turn on flashback on both databases.
4.record SCN xxx on physical standby database.
5.convert physical standby to logical standby (using keep identity statement)
6.flashback to logical standby to xxx
7.convert logical standby to physical standby
8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
Data Guard :: How To Know Current Active Guard Settings In Standby Database
Oct 17, 2012Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
Data Guard :: Standby Redo Log On Standby
Apr 24, 2011GROUP# THREAD# SEQUENCE# sizeMB ARC STATUS T
---------- ---------- ---------- ---------- --- ---------------- -
1 1 115 512 YES CLEARING O
2 1 116 512 YES CURRENT O
6 1 114 512 YES CLEARING O
4 1 112 512 YES CLEARING O
5 1 113 512 YES CLEARING O
3 1 111 512 YES CLEARING O
6 rows selected.
[code]...
Above result is from standby database.I am trying to understand the concept of standby redo log.My stadby database protection_mode is MAXIMUM PERFORMANCE.
Data Guard :: Delete Datafile In Primary?
May 26, 2012I haved drop a datafile on Primary,and the archived log has transported to Standby,but the datafile is still exist in Standby.
Primary
alter tablespace tps_hxl
drop datafile '/u02/app/oracl/oradata/hxl10.dbf';
Data Guard :: ORA-19909 - Datafile 1 Belongs To Orphan Incarnation?
Jul 22, 2013I have flash backed by primary database to an older SCN, from then on I am receiving the following errors on my standby database when I do media recovery :
ERROR at line 1:ORA-00283: recovery session canceled due to errorsORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1:
'/u01/app/sbydb11g/system01.dbf' PRIMARY DATABASE RMAN> list incarnation; List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time------- ------- -------- ---------------- --- ---------- ----------1 1 ORCL 1343967574 PARENT 1 13-AUG-092 2 ORCL 1343967574 PARENT 754488 23-MAY-133 3 ORCL 1343967574 PARENT 1713927 14-JUN-134
[code]...
Data Guard :: Unable To Get Data Of Primary In Standby Database (dataguard)
Jan 16, 2013i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
Data Guard :: Unable To Get Data Of Primary In Standby Database
Jan 16, 2013I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
Data Guard :: Can't Connect To Standby DB
Jan 5, 2011I'm trying to prepare data guard operation on the virtual machines.
1. I have install Oracle database without start up database on the standby server.
2. I try to connect this db by sysdba, but failed!
Quote:
C:>sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I'm using instruction below: [URL]
Why I can't login to database?
Data Guard :: Physical Standby With Same SID
Sep 22, 2010I have to implement Physical standby using same SID. parameters required to set on Primary and standby. Also what entries are required to do in TNS file. Recently we have faced hardware failure.
View 10 Replies View RelatedData Guard :: How To Apply Archives In Standby
Sep 1, 2010i have attended an interview there i got a question like--->There are 100 archives generated in standby in that a series of five archives are missing and those are not available in the primary then how will you do.....
View 2 Replies View RelatedData Guard :: How To Get SQL Plan In Standby Database
Mar 14, 2012I want to get the execute plan of a sql in standby database(read only),but failed,how can i do?
SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access
SQL> select count(1) from hxl.tb_objects;
COUNT(1)
----------
22238018
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ ONLY
Data Guard :: Recreating Physical Standby
Jun 4, 2010I have an issue whereby our standby instance was down for a couple of days and when it came back online we found an archivelog file was missing, so recovery only happened up to a point. It appears that the archivelog was deleted therefore we are unable to continue with this standby. We are now planning to rebuild the standby database. As far as i know all of the steps originally performed need not be performed to complete this task.
1. Shutdown standby
2. Delete all datafiles & redo logs
3. Copy over datafiles to respective directories
4. Copy online logs and archivelogs to standby.
5. Create a control file for standby database
6. Startup mount standby database
7. start redo apply
Data Guard :: Oracle 9i Logical Standby
Feb 28, 2012There are two servers.one in HP-UNIX and another is solaris.
I would like to configure a logical standby using oracle 9i...Is it possible in 9i?
Data Guard :: Difference Between Standby And Dataguard
Jun 29, 2010Difference between standby and dataguard. I assume standby and dataguard are same?
View 4 Replies View RelatedData Guard :: How To Delete Archive Log On Standby
Jun 18, 2011We are planning to setup a data guard (Maximum performance configuration ) between two Oracle 9i databases on two different servers.
The archive logs on the primary servers are deleted via a RMAN job bases on a policy , just wondering how I should delete the archive logs that are shipped to the standby.
Is putting a cron job on the standby to delete archive logs that are say 2 days old the proper approach or is there a built in data guard option that would some how allow archive logs that are no longer needed or are two days old deleted automatically.
Data Guard :: Standby Activation Error?
Oct 22, 2010I m facing trouble to following trouble.
SQL> ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE OPEN READ ONLY
*
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/app/oracle/oradata/PBLSTAN/system01.dbf'
Data Guard :: Query Regarding Standby Server
Oct 25, 2011I want to know that what will happen when I will resize database file from 32G to 5G on primary server or add file to tablespace. Will standby server do the same automatically or I have to to something with standby server?
View 4 Replies View RelatedData Guard :: How To Create Standby Database For RAC
Mar 10, 2010I have two node rac running on SAN with ASM , i want to configure a single instance standby database for this.
View 2 Replies View RelatedData Guard :: Standby Database Architecture
Jul 8, 2011To have physical standby database, the hardware and software versions should be same, including patch sets?
View 3 Replies View RelatedData Guard :: Physical Standby Configuration
Mar 10, 2011I did the all necessary steps required for the physical standby configuration. My standby db is mounted but not able to open.
Below are the steps.
SQL> startup mount
ORACLE instance started.
Total System Global Area 1845493760 bytes
Fixed Size 2021568 bytes
Variable Size 452986688 bytes
Database Buffers 1375731712 bytes
Redo Buffers 14753792 bytes
Database mounted.
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_2='SERVICE=demodb' scope=both;
System altered.
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=ENABLE SCOPE=BOTH;
System altered.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
Database altered.
SQL> recover managed standby database cancel;
Media recovery complete.
SQL> alter database open read only;
alter database open read only
*
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u002/app/OraDB10g/stdemo/oradata/system01.dbf'
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH; ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcrfrsetnab_found], [1], [136], [],
[], [], [], []
ORA-00600: internal error code, arguments: [kcrfrgv_scn7], [], [], [], [], [],
[], []
SQL> ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY;
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kccocx_01], [], [], [], [], [], [],
[]
Data Guard :: Deleting Logs In Standby
Jan 27, 2011I've a primary database and a physical standby.Logs are shipping perfectly from primary to standby.The logs that are applied on the standby are getting stored in a mount point(LINUX-/opt2) which consumes more space(160 GB). Will that be right if I go ahead and delete them?
My rman configurations in primary is:
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 4;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[Code]....
Data Guard :: Archive Not Applied On Standby
Mar 25, 2013We recently configured data guard in test machine.Archives not applied in physical standby.Where i need to start investigation?
Primary
SQL> select THREAD#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
---------- --------------
1 301
[code]...
Data Guard :: Managing Physical Standby
Sep 17, 2013Today, I am learning dataguard 11.2.0.1. The docs said:A. Monitoring Standby DB Application of redo logs may be monitored by issuing the SQL command:
SQL> select client_dbid, process, sequence#, status from v$managed_standby;
In the primary database, the sequence# with the status “WRITING” would refer to the current redo log sequence#In the standby database, if the status of the process MRPO is “APPLYING LOG” and the status of the process LGWR is “IDLE”, then application of redo logs is up to dateI see that that MRPO at standby is "WAIT_FOR_GAP". How do I resolve this gap.