I have create the following procedure to create individual jobs dynamically on each schema.
CREATE OR REPLACE PROCEDURE APSP.JOB_TEST_RAM
AS
V_SQL VARCHAR2 (1000);
BEGIN
[Code]....
While executing this procedure I am getting the below error.
PLS-00103: Encountered the symbol "APPS_XX" when expecting one of the following:
I am writing the following PLSQL code-
BEGIN
DBMS_SCHEDULER.CREATE_JOB
(
job_name=>'TRIAL JOB',
job_type=>'PLSQL BLOCK',
job_action=>
[code]........
The new table used above has the following structure
Name Null? Type
STAMP TIMESTAMP(6) WITH TIME ZONE
However I get the following error on execution and am not able to make out why?
BEGIN
*
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
ORA-06512: at line 3
error while creating a catalog db
error creating db
ORACLE error from recovery catalog database ORA-01552: cannot use system rollback segment for non-system tablespace 'TS'
ORACLE error from recovery catalog database:ORA-00942:table or view doesnt exist
RMAN-00571:--------------------------------------------------------------------------------------------------
RMAN-00569----------------ERROR MESSAGE STACK FOLLOWS-------------------------------------------
RMAN-00571:---------------------------------------------------------------------------------------------------
RMAN-06433:error installing recovery catalog
If i create a table in Oracle 10g it givea me the follwoing Error.. what couls be the error...
ORA-00911: invalid character
create table shopper
(
cShopperId varchar2(30) primary key,
cPassword char(20) not null,
vFirstName varchar2(20) not null,
[code]....
i have a union all query (two quiries i suppose) that runs fine and returns the results i am after.... when i try to use this query to create a view I get
SQL Command: CREATE OR REPLACE FORCE Failed: Warning: execution completed with warning
CREATE OR REPLACE FORCE VIEW "schema1"."name_of_view" ("column1", "column2", "column3") AS
SELECT b.column1, a.column2, c.column3
[Code].....
I am trying to create my own error message but when ever i used sp_addmessage it gives error sp2-0734 unknown command biggning... what to do?
View 12 Replies View RelatedI am creating prim and phy standby on same WIN machine. I have done with all settings. I can do TNSPING to both oracle_sid.I am trying to connect as sysdba to UP the phy standby. But it gives below error:
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
So i tried creating password file for phy standby. But gives below error:
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
I am running it from proper dir.
Am trying to create a materialized view as below
SQL> CREATE MATERIALIZED VIEW emp_view_73 BUILD IMMEDIATE REFRESH COMPLETE ON COMMIT
2 AS
3 SELECT em.employee_id,
4 em.employee_fname
5 ||' '
6 ||em.employee_lname employee_name,
[code]....
ERROR at line 12: ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view
While creating temp backup table it shows error ORA-00904 'invalid identifier'
CREATE TABLE xxom_valvelink_vlvs_temp AS
SELECT msie.inventory_item_id,FDFC.application_column_name,
flv.tag,
[Code]....
I have this requirement to pull the ACTIVE days that a participant holds true in a given month for a specific position he/she holds.The three date ranges here are: LOA dates(leave of absence), XFER dates(TRANSFER in/out of the position),Quality compliance(QUAL start/end dates).So,
INACTIVE DAYS = [(LOA + XFER + WW) - OVERLAPPING DAYS OF (LOA+XFER+QUAL)]
CREATE TABLE PAYEES
(
RUN_PERIOD DATE NOT NULL,
PAYEEID VARCHAR2(20 BYTE) NOT NULL,
LOA_START_DATE DATE,
LOA_END_DATE DATE,
[code]....
I am able to pull out the no of days on a individual basis(count of days for Xfer/LOA/Qual) but I am really not sure as to how should i go about determining the overlapping days between 3 date ranges to determine the ACTIVE/INactive days.
When trying to create package I receive this error...[Error] PLS-00103 (8: 16): PLS-00103: Encountered the symbol "." when expecting one of the following:;
pointing to "." in the last line "END nondrg_prod.Readmissions;"
CREATE or replace PACKAGE nondrg_prod.Readmissions AS
TYPE Readmits IS REF CURSOR RETURN READMISSIONS_DATA_MH%ROWTYPE;
PROCEDURE open_rdmh (rdmh IN OUT rdmhCurTyp);
END Readmissions;
[code]....
creating a sql table im getting error " ORA-00907: missing right parenthesis"
CREATE TABLE Campaign
(campaign_id NUMBER(5) PRIMARY KEY,
Account VARCHAR(20) NOT NULL,
SalesLead ID,
SCLead ID,
[code]....
the problem is "ID" and "ID+R", i need these to conect with other sql tables
H want to Create a view which reside in one instance for example xxx Instance . I want to create the same view which reside in xxx instance to another instance for example YYY Instance How to acheive this ?I tried desc the View take the view script from XXX instance and copied the view script to YYY instance when I compiled Iam getting an Error
For Example My view in XXX Instance
CREATE OR REPLACE FORCE VIEW xxx.sample
(
First_name,
last_name
)
as
select "F_NAME",
"L_NAME"
FROM EMP;
When try to copy and compile the same view in my YYY Instance i am getting error
while creating database*(windows server 2008 R2 version and 11g r2)*
1.DIIM ERROR OCCURS
2.then i started all the oracle services on
3.then igot ora-01092:oracle instance terminated disconnection forced
4.ora-00450:background process'qmnc' did not start
5.ora-00444:background process"qmnc" failed while starting
6.ora-maximum number of process 0 exeeded
I have a question. If i insert some values to a table and then write a create statement. But if the create statement gives me error (eg: table name already exist). And without commiting if i come out the session will the insert commit?
View 9 Replies View RelatedI am trying to create two tables and I am getting the "ORA-00911: invalid character" Error. I have been trying to work it out for last past 30 minutes to no success.
CREATE TABLE special_rate
(
rate_id VARCHAR(3),
rate VARCHAR(5),
rate_expiry_date NUMBER(12),
PRIMARY KEY( rate_id ),
FOREIGN KEY( contract_id ) REFERENCES contract(contract_id)
[code]....
we have the following requirement for creating materialized view.
In database "DB1", a table "abc" is there in "user1" schema.
In database "DB2", in "user2", we are accessing the "abc" through DB link "DBL1" to DB1:
select * from user1.abc@DBL1;
we have created a public synonym for "user1.abc@DBL1" as "sabc".
In database "DB3", we need to create the materialized view to access "abc" in DB1 through DB2. we are not allowed to access "DB1" directly from "DB3". so we create a db link as "DBL2" in "DB3" to "DB2".
when i try to create a materialized view as below:
create materialized view abc_mv
as
select * from sabc@DBL2;
But got the error as "synonym translation invalid". When i access the SQL statement separately as below
select * from sabc@DBL2, its working but in Materialized view, it shown that error. Even i tried with schema name as well like "user2.sabc@DBL2" , but that also thrown same error.
Is there any option available for this type of creating materialized view?
I have created a database in Oracle10g which is working fine. Now when I try to create another the system gives the following error.
ORA-12560: TNS protocol adapter error.
I am creating a New User by using our customized Oracle Form for Creating a New User.
I am ting the Bellow errors:
-604-ORA-00604 : error occurred at recursive SQL level 1
ORA-200001 : failed to create user,please contact dba for support.
ORA-06512: at line : 16
I am using ORacle Forms 10g as a Front End and Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production as Back end.
i am getting ORA-04063 error while creating view in oracle.
View 2 Replies View Relatedwe are trying to create a materialized view (MV) which would access the remote database through db link. Now we need to do update on the local MV so that it should be reflected on the master table.
There is no primary key on this table and we are using "complete refresh" option. since we dont have control over remote database, we are not allowed to create MV log over there.
in this scenario, if i try to create updatetable MV with complete refresh, we are getting below error:
SQL Error: ORA-12013: updatable materialized views must be simple enough to do fast refresh
how to create such MV on this scenario?
our environment is:
Oracle 11.2.0.3
When a creating a pdf report in reports 6, under oracle 10g, the error message displayed is: The file is damaged and could not be repaired. If I change the report definition from a pdf to a txt file, the error does not display, but the output has the margings distorted.. It only happens when using reports 6
View 2 Replies View RelatedI am getting error while trying to create a table
SQL>
SQL> CREATE OR REPLACE TABLE CEE_OSPCM_DETAILS
2 (
3 ORD_NBR VARCHAR2(10) NOT NULL,
4 ORD_APPNDX NUMBER(2) NOT NULL,
5 FRCOI_NBR NUMBER,
6 PRINT_NBR VARCHAR2(4),
[code]....
we are doing a fresh install of oracle10g on a ubuntu 64bit os.Our previous installation on ubuntu 32bit os was successful.On our installation on the new server we came upon this:
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: error creating log stream /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
Linux Error: 13: Permission denied
Listener failed to start. See the error message(s) above..and this
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=202.92.129.77)(PORT=1521)))
TNS-12541: TNS:no listener
since i'm new to server administration thingy,
whenever i tried to create spfile from pfile i got this error...oracle not available and shared memory realme does not exist.
View 10 Replies View RelatedI have one table test_pc :
EVENT_IDPARENT_EVENT_ID
2001
2002 2001
1001 2002
1002 1001
1004
1003 2005
1006
Scripts are mentioned below :
create table test_pc
(event_id number(10), parent_event_id number(10));
insert into test_pc values(2001,null);
insert into test_pc values(1006,null);
insert into test_pc values(1004,null);
insert into test_pc values(2002,2001);
insert into test_pc values(1001,2002);
insert into test_pc values(1002,1001);
insert into test_pc values(1003,2005);
In order to derive parent child relationship I have ran the following query :
select *
from test_pc
start with parent_event_id is null
connect by nocycle prior event_id = parent_event_id;
It is giving all the records except the last one (i.e. event_id = 1003 and parent_event_id = 2005), because the parent_event_id does not exists in the table.
But my requirement is to show all the record, i.e. if the parent_child relationship is present then show accordingly and also show the rest of the records where the parent_child does not exists even the parent_event_id exists.
I'm getting an error as follows .
create table asgnd_agent_bak as (Select * from ASGND_AGENT a, SCN s
where
a.CNTCT_KEY = s.CNTCT_KEY and a.SCN_NUM=s.SCN_NUM
and a.ACTVTY_DT = to_date('03/17/2013','mm/dd/yyyy')
and s.SCN_OPEN_DT = to_date('03/15/2013','mm/dd/yyyy')
and a.SRC_SYS_DESC = 'FACET');
create table asgnd_agent_bak as (Select * from ASGND_AGENT a, SCN s
*
ERROR at line 1:
ORA-00957: duplicate column name
I am trying to restore to a backup instance on a backup server. When I try to recreate the tables I keep getting ORA-01659: unable to allocate MINEXTENTS. The tablespaces and datafiles on both servers show as the same size in OEM.
I have dropped all tables and OEM shows tablespaces are empty. Then I run a script to recreate all tables. Most of the tables don't get created because their TS is full. After the script to recreate all tables runs, the main tablespaces are full, more full than on the production machine. I have also tried ALTER TABLESPACE xxx COALESCE; on each tablespace right after dropping all tables and before recreating them to reclaim free space. Why is it full? I've only dropped and created the tables, there shouldn't be any data in them yet.
ORA-01659: unable to allocate MINEXTENTS beyond 2 in tablespace PLUS_T...The backup instance was already there, all I did was drop the tables. Here's what I ran on prod to build a script to recreate the tables on backup server. Got it off Burleson somewhere.
SELECT DBMS_METADATA.GET_DDL('TABLE',u.table_name) ||'; '
FROM USER_TABLES u;
I am getting a ORA-03114 (not connected to Oracle) error when I am creating a DB using DBCA. Here are the steps that I do:
1) Log onto the server remotely, using Exceed Query
2) Connect as the oracle user (Oracle)
3) set ORACLE_HOME, PATH
4) Run DBCA, give parameters
At around 12% and again at 19%, I get the error (see screenshot). I also tried to generate the scripts and run them remotely, and the steps run successfully upto & including the step " startup nomount pfile="/oracle/admin/<dbname>/scripts/init.ora"; ". After that, when I try to run the script specified in rmanRestoreDatafiles.sql from SQL> prompt, the error appears, and connection to ORACLE is lost.
Googling the error shows that it is a connectivilty issue, and Oracle says that it is usually caused by user scripts. But I am not running any user-created scripts as part of the DBCA process. Somehow, the instance is timing out immediately after doing the "startup nomount".
This is on a vmware virtual server on Windows 2008R2 using ORACLE 11g R2 with patch set 6
I installed ORACLE (software only) and applied patch set 6 and tried to create a new database.
during the database creation I got an error as the system was adding the JVM that read:-
ORA-01927:cannot REVOKE privileges you did not grant.
I was given the options to ignore or abort
I chose to ignore the error and continue.
After the database creation completed I looked in the jserver log copied below and found two errors
I did not get the same error before installing patch set 6
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No errors.
alter system flush shared_pool
drop role javauserpriv
[Code].....