While creating temp backup table it shows error ORA-00904 'invalid identifier'
CREATE TABLE xxom_valvelink_vlvs_temp AS
SELECT msie.inventory_item_id,FDFC.application_column_name,
flv.tag,
[Code]....
If i create a table in Oracle 10g it givea me the follwoing Error.. what couls be the error...
ORA-00911: invalid character
create table shopper
(
cShopperId varchar2(30) primary key,
cPassword char(20) not null,
vFirstName varchar2(20) not null,
[code]....
creating a sql table im getting error " ORA-00907: missing right parenthesis"
CREATE TABLE Campaign
(campaign_id NUMBER(5) PRIMARY KEY,
Account VARCHAR(20) NOT NULL,
SalesLead ID,
SCLead ID,
[code]....
the problem is "ID" and "ID+R", i need these to conect with other sql tables
I am trying to create two tables and I am getting the "ORA-00911: invalid character" Error. I have been trying to work it out for last past 30 minutes to no success.
CREATE TABLE special_rate
(
rate_id VARCHAR(3),
rate VARCHAR(5),
rate_expiry_date NUMBER(12),
PRIMARY KEY( rate_id ),
FOREIGN KEY( contract_id ) REFERENCES contract(contract_id)
[code]....
we are trying to create a materialized view (MV) which would access the remote database through db link. Now we need to do update on the local MV so that it should be reflected on the master table.
There is no primary key on this table and we are using "complete refresh" option. since we dont have control over remote database, we are not allowed to create MV log over there.
in this scenario, if i try to create updatetable MV with complete refresh, we are getting below error:
SQL Error: ORA-12013: updatable materialized views must be simple enough to do fast refresh
how to create such MV on this scenario?
our environment is:
Oracle 11.2.0.3
I am getting error while trying to create a table
SQL>
SQL> CREATE OR REPLACE TABLE CEE_OSPCM_DETAILS
2 (
3 ORD_NBR VARCHAR2(10) NOT NULL,
4 ORD_APPNDX NUMBER(2) NOT NULL,
5 FRCOI_NBR NUMBER,
6 PRINT_NBR VARCHAR2(4),
[code]....
I'm getting an error as follows .
create table asgnd_agent_bak as (Select * from ASGND_AGENT a, SCN s
where
a.CNTCT_KEY = s.CNTCT_KEY and a.SCN_NUM=s.SCN_NUM
and a.ACTVTY_DT = to_date('03/17/2013','mm/dd/yyyy')
and s.SCN_OPEN_DT = to_date('03/15/2013','mm/dd/yyyy')
and a.SRC_SYS_DESC = 'FACET');
create table asgnd_agent_bak as (Select * from ASGND_AGENT a, SCN s
*
ERROR at line 1:
ORA-00957: duplicate column name
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
I have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log
Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
I am trying to clone a database on another server with different direcory structure. So that path on the source db server are /u04 whereas on on target db server it would be /u03.
Since this I am testing it on small database initially I have kept all datafiles, backup and archivelogs at /u04 and /u03 on the source and target db servers respectively Now I have copied the backups from source db server to target and since path is changed, I cataloged it
However during restore I am getting
Quote:ORA-19870: error reading backup
Here are the session details
RMAN> catalog start with '/u03/oradata/db7fra';
searching for all files that match the pattern /u03/oradata/db7fra
List of Files Unknown to the Database
=====================================
File Name: /u03/oradata/db7fra/DB7/archivelog/2011_03_15/o1_mf_1_16_6qyvpb3w_.arc
File Name: /u03/oradata/db7fra/DB7/backupset/2011_03_15/o1_mf_annnn_TAG20110315T123018_6qypyv5v_.bkp
[code].....
I have altered permissions on the backup files as well but of no use
oracle@dev-biz:/u03/oradata/db7fra/DB7/backupset/2011_03_15 $ls -ltr
total 545260
-rwxrwxrwx 1 oracle dba 12419072 Mar 15 13:52 o1_mf_ncsnf_TAG20110315T123008_6qypyrz2_.bkp
-rwxrwxrwx 1 oracle dba 3072 Mar 15 13:52 o1_mf_annnn_TAG20110315T125043_6qyr54to_.bkp
-rwxrwxrwx 1 oracle dba 426496 Mar 15 13:52 o1_mf_annnn_TAG20110315T125006_6qyr3zk4_.bkp
-rwxrwxrwx 1 oracle dba 14336 Mar 15 13:52 o1_mf_annnn_TAG20110315T123018_6qypyv5v_.bkp
[code].....
We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database
[code]....
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
SQL> SELECT * FROM V$VERSION;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
after i backup my database,i check the alert log ,i found the following errror:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
[code]....
the trace number 26967 :
[oracle@shenzhengair archivelog]$ cat /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
/u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
[code]....
what does the error mean?
I am running Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I ran the following commands in RMAN:
RMAN>
connect target /
CONFIGURE COMPRESSION ALGORITHM 'MEDIUM' ;
set encryption identified by 'xxxx' only;
run {
[code]...
I get the follwing error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/19/2013 06:57:4
ORA-03113: end-of-file on communication channel
[code]...
create Oracle archived log to network drive instead of Local drive.
Is there anyway that i can get my archive log created on network drive instead of local drive.
As we want to save our storage space and want to keep archivelog on network.
Is there a way that if Archive log creation on Network drives falis, Oracle create Archivelog on Local drive.
We are running Data warehouse and on daily basis we have 22 to 25 Gig of Archive log created
error while Making Permanent Backup
RMAN> run
2> {
3> allocate channel c3
4> device type disk
5> parms 'ENV=E:ackup';
6> backup database
7> tag 'Q1_2012'
8> keep forever;}
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found ";": expecting one of: "consistent, logs, nologs
"
RMAN-01007: at line 8 column 13 file: standard input
I am writing the following PLSQL code-
BEGIN
DBMS_SCHEDULER.CREATE_JOB
(
job_name=>'TRIAL JOB',
job_type=>'PLSQL BLOCK',
job_action=>
[code]........
The new table used above has the following structure
Name Null? Type
STAMP TIMESTAMP(6) WITH TIME ZONE
However I get the following error on execution and am not able to make out why?
BEGIN
*
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
ORA-06512: at line 3
error while creating a catalog db
error creating db
ORACLE error from recovery catalog database ORA-01552: cannot use system rollback segment for non-system tablespace 'TS'
ORACLE error from recovery catalog database:ORA-00942:table or view doesnt exist
RMAN-00571:--------------------------------------------------------------------------------------------------
RMAN-00569----------------ERROR MESSAGE STACK FOLLOWS-------------------------------------------
RMAN-00571:---------------------------------------------------------------------------------------------------
RMAN-06433:error installing recovery catalog
I have create the following procedure to create individual jobs dynamically on each schema.
CREATE OR REPLACE PROCEDURE APSP.JOB_TEST_RAM
AS
V_SQL VARCHAR2 (1000);
BEGIN
[Code]....
While executing this procedure I am getting the below error.
PLS-00103: Encountered the symbol "APPS_XX" when expecting one of the following:
I am trying to create a clone database using hot backup of a database .
STEPS THAT I FOLLOWED
------------------------------------
LET ----- >CURRENT_DB NAME=DEV
CLONE DATABASE NAME=DEVCLONE
steps PERFORMED FORM DEV DB
-----------------------------------------------
- put the database in backup mode using 'alter database begin backup'
- copy all the data files to a different folder
- during copy i have performed some operations on the DB (creating users, tables, dmls etc...)
- in between copying i also performed log switch
- after completion of copy , "alter database end backup"
- created a backup control file in a human readable format (alter database backup controlfile to trace as ........)
steps performed for clone DB side ((DEVCLONE)
-------------------------------------------------------------------
- created a parameter file for the database .
- modified the backup control file so that it will point to the location of copied destination of datafiles
- set the ORACLE_SID
- then 'sqlplus / as sysdba
- starup nomount
- run the modified control file ( created a control file for the clone database)
- recover the database using "recover database using backup controlfile"
I have provided the archive files that it was asking for (archive logs that has been generated in DEV DB)
then i canceled the recovery by typing "cancel"
- recover database using backup controlfile until cancel;
then typed "cancel"
- then try to open the database with open resetlogs but it showed below error
alter database open resetlogs
*
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:DATA_GUARDDEVHOTSYSTEM01.DBF'
I'm encountering the following 2 different errors from RMAN:
Prior to OS restart:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10039: error encountered while polling for RPC completion on channel t1
RMAN-10006: error running SQL statement: select act from x$ksusex where sid=:1 and serial=:2
RMAN-10002: ORACLE error: ORA-03113: end-of-file on communication channel
[code]...
diagnose what actually occurred during RMAN backup?
i have a union all query (two quiries i suppose) that runs fine and returns the results i am after.... when i try to use this query to create a view I get
SQL Command: CREATE OR REPLACE FORCE Failed: Warning: execution completed with warning
CREATE OR REPLACE FORCE VIEW "schema1"."name_of_view" ("column1", "column2", "column3") AS
SELECT b.column1, a.column2, c.column3
[Code].....
I am trying to create my own error message but when ever i used sp_addmessage it gives error sp2-0734 unknown command biggning... what to do?
View 12 Replies View RelatedI am creating prim and phy standby on same WIN machine. I have done with all settings. I can do TNSPING to both oracle_sid.I am trying to connect as sysdba to UP the phy standby. But it gives below error:
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
So i tried creating password file for phy standby. But gives below error:
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
I am running it from proper dir.
Am trying to create a materialized view as below
SQL> CREATE MATERIALIZED VIEW emp_view_73 BUILD IMMEDIATE REFRESH COMPLETE ON COMMIT
2 AS
3 SELECT em.employee_id,
4 em.employee_fname
5 ||' '
6 ||em.employee_lname employee_name,
[code]....
ERROR at line 12: ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view
I have this requirement to pull the ACTIVE days that a participant holds true in a given month for a specific position he/she holds.The three date ranges here are: LOA dates(leave of absence), XFER dates(TRANSFER in/out of the position),Quality compliance(QUAL start/end dates).So,
INACTIVE DAYS = [(LOA + XFER + WW) - OVERLAPPING DAYS OF (LOA+XFER+QUAL)]
CREATE TABLE PAYEES
(
RUN_PERIOD DATE NOT NULL,
PAYEEID VARCHAR2(20 BYTE) NOT NULL,
LOA_START_DATE DATE,
LOA_END_DATE DATE,
[code]....
I am able to pull out the no of days on a individual basis(count of days for Xfer/LOA/Qual) but I am really not sure as to how should i go about determining the overlapping days between 3 date ranges to determine the ACTIVE/INactive days.
When trying to create package I receive this error...[Error] PLS-00103 (8: 16): PLS-00103: Encountered the symbol "." when expecting one of the following:;
pointing to "." in the last line "END nondrg_prod.Readmissions;"
CREATE or replace PACKAGE nondrg_prod.Readmissions AS
TYPE Readmits IS REF CURSOR RETURN READMISSIONS_DATA_MH%ROWTYPE;
PROCEDURE open_rdmh (rdmh IN OUT rdmhCurTyp);
END Readmissions;
[code]....
H want to Create a view which reside in one instance for example xxx Instance . I want to create the same view which reside in xxx instance to another instance for example YYY Instance How to acheive this ?I tried desc the View take the view script from XXX instance and copied the view script to YYY instance when I compiled Iam getting an Error
For Example My view in XXX Instance
CREATE OR REPLACE FORCE VIEW xxx.sample
(
First_name,
last_name
)
as
select "F_NAME",
"L_NAME"
FROM EMP;
When try to copy and compile the same view in my YYY Instance i am getting error
while creating database*(windows server 2008 R2 version and 11g r2)*
1.DIIM ERROR OCCURS
2.then i started all the oracle services on
3.then igot ora-01092:oracle instance terminated disconnection forced
4.ora-00450:background process'qmnc' did not start
5.ora-00444:background process"qmnc" failed while starting
6.ora-maximum number of process 0 exeeded