When I run the code below It runs very Long. It updates SUSR5 in the TEMPTABLE3 that has 112000 records. If I Change it when c>m to 2 to test. It runs very fast. The value for m is always between 10000 and 12000. That How many times it must loop to update the correct records.
DECLARE
a VARCHAR(50);
c NUMBER:= 1;
m NUMBER;
[Code]....
I need to update column of a table with +,- 70,000,000 records.
If I perform an update it lasts......too much and does not finish!
OS:Solaris
DB:10G
I have a situation where there are multiple records for a join criteria. I am trying to find a way to update a particular column for all the records returned by the join criteria. Example :
Table A
id number
1 1000
2 2000
3 3000
4 4000
Table B
id number
1 9999
1 9999
1 9999
1 9999
1 9999
1 9999
2 8888
2 8888
3 6666
3 6666
Result after update:
Table B
id number
1 1000
1 1000
1 1000
1 1000
1 1000
1 1000
2 2000
2 2000
3 3000
3 3000
update query ? When I use a update statement with where exists it errors out because the query returns more than one row for the join condition.
I have 2 tables
Table 1Name Item DateJon Apples 06/11/2013 00:30:00 hrsSam OrangesNish Apples
Table 2 - Net countName Item CountNish Apples 10Nish Oranges 17Nish BananaSam Apples 10Sam Oranges 1Sam Bananas 1Jon Apples 8
I need to create a job that checks Table 1 for new records added after last run and then add the count in Table 2 accordingly.how to achieve this using PL/SQl or something similar
Test case: drop table test;
create table test (id number, last_name varchar2(15), first_name varchar2(15), empno varchar2(15))
select * from test;
insert into test values (143,'frank','kadel,watson','j2098,k09876');
insert into test values (143,'steve','kadel,watson','j0987i,kuy765');
[code]....
The requirement is as follows: I need to split the rows by first_name and assign the respective empno in the results child rows if there is any.
For example:- Where id = 143, the resultset should be like this.
ID LAST_NAME FIRST_NAME EMPNO
---------- --------------- --------------- ---------------
143 frank kadel j2098
143 frank watson k09876
143 steve kadel j0987i
143 steve watson kuy765
sofar, i am able to come with the query to split the records by last name but unable to find the way to extract the respective empno and assign to the splited records correctly.
SQL> select id, last_name, EXTRACTVALUE(x.COLUMN_VALUE, 'e') first_name, empno
2 from test,
3 TABLE(XMLSEQUENCE(XMLTYPE('<e><e>' || REPLACE(first_name, ',', '</e><e>') || '</e></e>')
4 .EXTRACT('e/e'))) x
5 ;
[code]...
Im looking for the posibility to update some records using new id with the column values with another id
example
the table contains these records:
id gross net
========================
7 0,1 0,0507749
8 0,2 0,1015499
9 0,5 0,2538748
10 0,83 0,4214
11 0,85 0,4315873
[Code]....
and I would like insert the same gross and net column values of ids 7 to 16 into columns with the ids 40 to 49 in the same order. therefore I would like to obtain the result that I describe below:
id gross net
========================
7 0,1 0,0507749
8 0,2 0,1015499
9 0,5 0,2538748
10 0,83 0,4214
11 0,85 0,4315873
[Code]....
i'm using the below query to update a VOTER table with over 15million records but it's taking ages to finish. i am using 11gr2 on linux
the query:
MERGE INTO voter dst
USING (
SELECT voterid,
pollingstation || CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY pollingstation
[code]........
I have made a correlated update statement using rowid. Find my attachment. Its updating all columns which i wanted but issue is that its not updating in 1st commit.
Suppose 6 rows is to be updated, then in 1st commit its updating 1 record, then in 2nd commit its updating 2nd record and so on. And in Toad its showing 6 rows updated in 1st commit, then 5 rows updated in 2nd commit and 1 rows updated in last record. I want that all records to be updated in first commit only.
I have a table with following structure:
CREATE TABLE ID_comments
(
ID CHAR(10 BYTE) NOT NULL,
S_COMMENTS VARCHAR2(255 BYTE),
P_COMMENTS VARCHAR2(255 BYTE),
C_COMMENTS VARCHAR2(255 BYTE)
);
For each Id, I can have multiple records.
Below is the insert script of one of the ID:
Insert into ID_comments values ('0813654254','','JR/0813653606 single','');
Insert into ID_comments values ('0813654254','','JR/0813653606 single','');
Insert into ID_comments values ('0813654254','','JR/0813653606 SINGLE','');
Insert into ID_comments values ('0813654254','','JR','');
[code].......
Now I want to select only one record from this table for an ID, which will have "not null" values for s_comments,p_comments,c_comments columns. If for some ID , there is no "not null" row for any column, then pick up the "null" row/value for that column.
I have a form with two data blocks, one parent, one child block.
The parent is holds mineral lease info while the child holds the mineral owner info, such as addresses and phone numbers. One owner can be in the owner block multiple times (different owner types). The form only displays one owner at a time.
We have a separate master owner table which holds owner address. (We set it up this way because we get electronic info from mineral companies that we have to load each year).
As you tab through the owner block, it checks the FEIN against the master table and pulls updated address info from the master table.
I have a problem in which if an owner is on the lease multiple times, when you tab through the first instance, it pulls in the new address info, but when you go to the next instance, it won't update. If you requery, it seems that the first update actually updated all the owner records on that lease. How can I turn this off?
I am trying to bulk update records in oracle using XML , front end is vb.net.Now the problem when i updating for 1000 - 5000 records on my development server. Its getting updated.
But when we are updating on the production server for 100000-200000 records , we receive error
"ORA-01460: unimplemented or unreasonable conversion requested "
I AM WORKING ON FORM I WANT TO SAVE THE RECORD IN TO TABLES TABLE1,TABLE2 AFTER UPDATING THE
TABLE1..BOTH THE TABLE HAVE SAME COLUMNS'.
WHAT IS THE TRIGGER FOR THAT
I need to find the identical rows in the below table based on ID column and update the previous identical record's end_date with latest record's start_date-1.
"ID" "NAME" "START_DATE" "END_DATE"
1 "a" 05-MAR-10 31-DEC-99
1 "B" 30-MAY-12 31-DEC-99
1 "C" 30-MAY-13 31-DEC-99
2 "A" 02-APR-10 31-DEC-99
2 "B" 02-APR-10 31-DEC-99
2 "C" 30-MAY-12 31-DEC-99
3 "C" 04-MAR-10 31-DEC-99
Result should be like below format..
"ID" "NAME" "START_DATE" "END_DATE"
1 "a" 05-MAR-10 29-MAY-12
1 "B" 30-MAY-12 29-MAY-13
1 "C" 30-MAY-13 31-DEC-99
2 "A" 02-APR-10 01-APR-10
2 "B" 02-APR-10 29-MAY-12
2 "C" 30-MAY-12 31-DEC-99
3 "C" 04-MAR-10 31-DEC-99
I've created a system for managing football within APEX and it is at a stage now whereby the user can view any number of the tables through Reports and insert data into these tables through Tabular Forms. Its using triggers and sequences to allow for new primary keys to be generated each time within these Tabular Forms so I'm at a stage now where I'm really quite pleased with it..
The last thing I'm needing to do now is have it update certain fields when certain records are entered.
Clubs
clubId
clubname
gamesplayed
clubPoints
clubtotalgoals
Results
club1 (clubId foreign key from clubs table)
club2 (clubId foreign key from clubs table)
club1goals (the amount of goals, type Number)
club2goals (the amount of goals, type Number)
club1points (points earned, Type Number)
club2points (points earned, Type Number)
When filling out a result, the user will enter the following (as an example):
club1 - 1 (club with ID, 1)
club2 - 12 (club with ID, 12)
club1goals - 2 (the first club scored 2 goals)
club2goals - 0 (the second club scored 0 goals)
club1points - 3 (the first club picked up 3 points)
club2points - 0 (the second club picked up 0 points)
The result is then entered into the results table and what I am hoping to achieve at this stage is the following:
1) in the clubs table, the gamesplayed is incremented by 1 for both clubs as a result of playing this fixture
2) club1 has however many goals club1 scored added to its current clubtotalgoals field (in this case, it is of course 2)
3) club1 has however many points club1 earned to its current clubPoints field. (In this case it would be 3)
i used sql loader to import data from csv file to my db.but every time the columns places are changed.o i need dynamic way to insert data into correct column in the table.
in csv file contains column name and i insert this data to temp table, after that i want to read data over column name.also i read the column names from (All_Tab_Columns) to make combination of column name between temp table and All_Tab_Columns table to insert data to right place...
I have a multi record block based on a view. All records in the view are displayed in the block by use of Post-Query trigger when entering the form.
The block has 5 items as follows:
1) RECORD_STATUS = a non-base table column which is a checkbox.
2) ITEM_TYPE = a text-item which has an LOV attached.
3) ITEM_TEXT = a text-item which is free format text.
4) LAST_UPDATE_DATE a date column
5) STATUS = a text item either 'Open' or 'Closed'
The LOV is based on a table of Item Types with values say, 'Type1', upto 'Type9'.
I have a Wnen-New-Record-Instance trigger which 'Posts' changes to the database. This has been included as i want to limit the values of the ITEM_TYPE column to values which have not been previously used.
Consider this scenario...
The block has 3 records.
record 1 has 'Closed' status so no updates are allowed.
record 2 has 'Open' status so updating of Item_Text is allowed.
record 3 has 'Open' status so updating of Item_Text is allowed.
I check the RECORD_STATUS checkbox on record2.
(This sets the RECORD_STATUS checkbox to a checked value and changes the STATUS column to 'Closed' by When-Checkbox-Changed trigger.) At this point the record has not been saved so if you uncheck the checkbox , then the STATUS column will go back to 'Open'. However at this point i will leave it as Checked (Closed).
I then insert a new record, only values Item4 to Item 9 are correctly shown in the LOV. I select Item4.
I then go back to the previous record and uncheck the Checkbox to say that i wish to leave it 'Open' after all (in effect no changes have occurred), then the STATUS column correctly reverts back to 'Open' by my WCC trigger. If i then SAVE the changes, the new record has been inserted on the database correctly, however the LAST_UPDATED_DATE from the record which was checked and then unchecked has also been updated incorrectly even though no net changes have actually occurred.
(because i am using WNRI trigger to limit the List of Values on the LOV column, this has incorrectly set the previous records LAST_UPDATED_DATE column to be Sysdate.)
How can i stop this from happening?
Which is the correct method to calculate actual data size in a table? becaue when I serach in google, I saw the below line.
"Oracle thumb rule says (actual space required for a table + 30 % space) will calculate the original space requirement for a table."
Method 1:
actual space = num_rows*avg_row_len
Method 2:
actual space = (Num of rows in a table) * (Avg_row_len) + ((Num of rows in a table) * (Avg_row_len)* 0.3)
Is there any way through which we can put forth a condition on Alias name instead of column name in a table.
For example: Select emp_name "Employee Name" fom dual where emp_id is not null;
Instead can there be a workaround so I can put "Employee Name" in where clause?
I have Oracle loaded on a server. I have three database instances - /db1, /db2, /db3. I want to put the database in backup mode before I take a backup copy of the three database instances.
Is the database put in backup mode just once and then the three instances can be backed up? Or does each instance need its own script to put the database in backup mode?
I have 2 tables, ASSIGNMENT and RESEARCH_PAPER. For each research paper, I need to find out :
1. The number of assignments created from it (after a given constant assign date)
2. The number of assignments created from it that have been approved.
3. The number of unique users who have either created or approved an assignment from it
Test data :
create table research_paper (id int, name varchar2(100));
create table assignment (id int, r_paper_id int, assigner_id int, assignee_id int,
approver_id int, assign_date timestamp, approved_yn varchar2(10));
insert into research_paper values (1, 'A');
insert into research_paper values (2, 'B');
[code]....
Assignment :
id r_paper_id assigner_id assignee_id approver_id assign_date approved_yn
-----------------------------------------------------------------------------------------------------------
11 100 200 100 23-10-12 12:00:00.000000000 AMY
22 200 100 200 22-10-12 12:00:00.000000000 AMN
32 100 200 101 24-10-12 12:00:00.000000000 AMY
[code]....
Research_paper:
id name
----------
1A
2B
Expected result :
r_paper_id created approved unique_users
-----------------------------------------------
1 3 2 4
2 3 2 3
I wrote the following query for that :
SELECT rp.id r_paper_id,
COUNT(*) created,
COUNT(
CASE
WHEN a.approved_yn = 'Y'
[code]....
But it fails, saying that 'single-row subquery returns more than one row' when I introduce the 'unique_users' clause. The remaining fields of the output are correct.
I am having a application which is on Widows NT Operating system.I am using Oracle 10g Database, Developer suite 10g And 10g Application server.
My application uses Run_report_object to generate reports.Run_Report_Object is called in forms and Report server is configured in the same Application server where FMX are placed.
The report generation was working fine as long as oracle default login was used. When i created a form to handle login on my own, Report server is throwing "Unable to connect to database" error. My login forms takes the parameters from user and calls default logon command in on_Logon trigger.
I am trying to update records in the target table based on the records coming in from source. For instance, if the incoming record is present in the target table I would update them in the target else I would simply insert. I have over one million records in my source while my target has 46 million records. The target table is partitioned based on calendar key. I implement this whole logic using Informatica. Looking at the informatica session log I find that the informatica code is perfectly fine but its in the update part it takes long time (more than 5 days to update one million records). find the TARGET TABLE query and the UPDATE query as below.
TARGET TABLE:
CREATE TABLE OPERATIONS.DENIAL_REGRET_FACT
(
CALENDAR_KEY INTEGER NOT NULL,
DAY_TIME_KEY INTEGER NOT NULL,
SITE_KEY NUMBER NOT NULL,
RESERVATION_AGENT_KEY INTEGER NOT NULL,
LOSS_CODE VARCHAR2(30) NOT NULL,
PROP_ID VARCHAR2(5) NOT NULL,
[code].....
I am using oracle 9i, and having trouble with updating a table.
I get ORA-00001(unique constraint) Error on executing the sql below; I know sql below is little strange( which use unique key in 'SET' statement) . but It worked on My Oracle Server. but it didn't on Client's.
why this error occurs or why this error did not occur on my PC,
[Update sql](key is CD and SDATE)
Update TBL1
set CD = 'A',
[Code]....
I am trying to write a control file that will read information from two INFILES and update two tables with the different information via SQL Loader. I am using Oracle 11g on Linux. i am not sure how to take the result from the first insert query and use it as input to the second insert query. Currently I have the following control file:
LOAD DATA
INFILE 'table1.dat'
INFILE 'table2.dat'
APPEND
INTO TABLE table1
WHEN tid='1'
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
(pid "pid.nextval", p_fname, p_lname, tid)
[code]....
The pid in the second insert query should be taken from the pid generated in the first insert query. However, I do not know how to do this. Does SQL Loader run the first insert query for all entries in the table1.dat file and then the second insert query or will it do one record at a time? Here are my INFILES:
table1.dat
,John,Doe,1
,Joe,Smith,1
table2.dat
10,,abc,1,
11,,xyz,1,
The second field in table2.dat should be taken from the result of creating a record in the table1.dat. Is this something that can be achieved using SQL Loader? The first part of the control file is successful, I can see the table being updated with the contents on table1.dat, but the second query fails.
Oracle 11.2 - The goal is to create a trigger on table and anytime an update, delete or insert is done on the table, write values to a second table. I have the trigger and it works except it is not loading my col1/PK values. I understand I need to do a new/old value. Col1 is my PK on Table that I want to load anytime there is an update/delete/insert on the table. How do I code the old/new variable?
My
CREATE OR REPLACE TRIGGER TRIGGER_NAME
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NAME
FOR EACH ROW
DECLARE
v_col1 TABLE_NAME.COLUMN%TYPE;
BEGIN
[code]...
I am updating a table column which is xml datatype and am getting above error.Below is the process what i did. since the xml is too large i split them into small chunks.
DECLARE
conditionXML CLOB;
ls_xml_2 Clob;
ls_xml_3 clob;
ls_xml_4 Clob;
ls_xml_5 Clob;
ls_xml_6 clob;
ls_xml_7 Clob;
[code]...
pgit_policy is transaction table having producer code field.
pgith_policy is history table, on that table if any endorsement passed new records created with same polh_sys_id and increment on POLH_END_NO_IDX.
I am trying to update all records of the history table but its updating only higest POLH_END_NO_IDX only. i need to update all producer code.
update pgith_policy a
set a.polh_producer_code= (select b.pol_producer_code
from pgit_policy b
where b.pol_no=a.polh_no
--and b.POL_END_NO_IDX= a.POLH_END_NO_IDX and b.POL_END_SR_NO = a.POLH_END_SR_NO
and b.pol_producer_code is NOT NULL
and b.pol_class_code='10')
where a.polh_class_code='10'
and a.polh_producer_code is null
and a.polh_appr_dt between to_date('01-06-2011', 'dd-mm-yyyy') and to_date('30-06-2011', 'dd-mm-yyyy')
how many rows certain tables have.
updating the statistics for a table (with GATER_TABLE_STATS) and using NUM_ROWS then. This works fine for me as long as I am the owner of the table, but when someone else is, I always get this error: ORA-20000: Table does not exist or insufficient privileges.what privileges do I need to use GATHER_ TABLE_ STATS on all Tables, which were created by Users?
when I tried to use ANALYZE TABLE TEST_TABLE COMPUTE STATISTICS on a certain table I got the following error: a view is not appropriate here. The strange thing is, TEST_TABLE is not a view (at least it is not listed in ALL_VIEWS and is listed in ALL_TABLES, so it cant be a view right?).
Besides, is there another way to gather Table Statistics (not using Analyze Table or Gather_Table_Stats)?
I have created the following trigger whcich will track all the column changes and insert the row in log table. here i have some doubt while substituting the cursor value.
create or replace trigger historylog_trigger
before update on log_dev_test
for each row
declare
PRAGMA AUTONOMOUS_TRANSACTION;
in_loamid number(10);
in_col_name varchar2(10);
in_old_val varchar2(100);
[Code]..
are the below assignement of values will work ?
in_old_val:= ':old.'||r.column_name;
in_new_val:= ':new.'||r.column_name;
i want to take the coulmname from the cursor and assign tat to psuedo columns like :new.r.column_name .
DROP TABLE TESTING CASCADE CONSTRAINTS;
CREATE TABLE TESTING
(
DATAPERIOD DATE,
EMPLID VARCHAR2(20 BYTE),
B_OS_REASON VARCHAR2(9 BYTE)
)
TABLESPACE USERS;
[Code] ........
SQL> select * from testing order by 1;
DATAPERIO EMPLID B_OS_REAS
--------- -------------------- ---------
01-OCT-10 2387972
01-NOV-10 2387972
01-DEC-10 2387972 XXXXXX
01-JAN-11 2387972
01-FEB-11 2387972
In the above result, We need to go from bottom up and when we hit some value we need to update with the lastest record as below.("Blank" space are considered as null.)
DATAPERIO EMPLID B_OS_REAS
--------- -------------------- ---------
01-OCT-10 2387972
01-NOV-10 2387972
01-DEC-10 2387972 XXXXXX
01-JAN-11 2387972
01-FEB-11 2387972 XXXXXX