I have Oracle loaded on a server. I have three database instances - /db1, /db2, /db3. I want to put the database in backup mode before I take a backup copy of the three database instances.
Is the database put in backup mode just once and then the three instances can be backed up? Or does each instance need its own script to put the database in backup mode?
I am having a application which is on Widows NT Operating system.I am using Oracle 10g Database, Developer suite 10g And 10g Application server.
My application uses Run_report_object to generate reports.Run_Report_Object is called in forms and Report server is configured in the same Application server where FMX are placed.
The report generation was working fine as long as oracle default login was used. When i created a form to handle login on my own, Report server is throwing "Unable to connect to database" error. My login forms takes the parameters from user and calls default logon command in on_Logon trigger.
I have a scenario like while taking the hot backup i forgot put end backup mode,at the same time one of user u1 updating some lacks of recordsinto the T1 table.at some time he wants rollback.and my redolog file size is very less.is it possible to rollback? if yes how?
View 3 Replies View Relatedif I could execute the 'ALTER DATABASE BEGIN/END BACKUP' while in NOARCHIVELOG MODE.
View 6 Replies View Relatedafter setting a full database backup and restore in noarchivelog mode , i would like to perform backup and restore just a tablespaces.
View 1 Replies View Relatedchanging archive mode during DB running.Before in 9.2, 'ALTER SYSTEM ARCHIVE LOG START/STOP' is available for this job. But, after 10g/11g, it cause 'archive log stop has been deprecated'.
However, for my practice, I need to estimate archived logs size before backup them, so I need to stop archive log for a while and enable it later during DB running.
I check Oracle documents, it only mentions changing archive log mode at DB mounted but not open.
on our 10.2.0.5 database, when we run full backup, my system performance comes to an halt. we run full backup and then do a validate backup to validate the structure of the database etc. Database performance takes a hit and all of the application connections goes in wait mode: On ASH or AWR - this is the top wait i see:
RMAN backup & recovery I/O
Event % Event P1 Value, P2 Value, P3 Value % Activity Parameter 1 Parameter 2 Parameter 3
RMAN backup & recovery I/O 22.22 "1","32","2147483647" 21.79 count intr timeout
what can we do to over come this issue?
I am trying to backup a database and am having a couple problems:
1. When I log into RMAN for the database in question and run a simple backup database I get:
Quote: ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode message
2. I then logged into sqplus and shutdown / restart the database
3. when I try to restart it - it fails to starup claiming:
Quote: sqlplus Error: ORA-12560: TNSrotocol adapter error
4. I have tried to login in locally (not using Quote: @<dbasename> but I get the same error message as above. I have set ORACLE_SID and LOCAL to the database name and still the same TNS name error
Is there any way through which we can put forth a condition on Alias name instead of column name in a table.
For example: Select emp_name "Employee Name" fom dual where emp_id is not null;
Instead can there be a workaround so I can put "Employee Name" in where clause?
When I run the code below It runs very Long. It updates SUSR5 in the TEMPTABLE3 that has 112000 records. If I Change it when c>m to 2 to test. It runs very fast. The value for m is always between 10000 and 12000. That How many times it must loop to update the correct records.
DECLARE
a VARCHAR(50);
c NUMBER:= 1;
m NUMBER;
[Code]....
I have 2 tables, ASSIGNMENT and RESEARCH_PAPER. For each research paper, I need to find out :
1. The number of assignments created from it (after a given constant assign date)
2. The number of assignments created from it that have been approved.
3. The number of unique users who have either created or approved an assignment from it
Test data :
create table research_paper (id int, name varchar2(100));
create table assignment (id int, r_paper_id int, assigner_id int, assignee_id int,
approver_id int, assign_date timestamp, approved_yn varchar2(10));
insert into research_paper values (1, 'A');
insert into research_paper values (2, 'B');
[code]....
Assignment :
id r_paper_id assigner_id assignee_id approver_id assign_date approved_yn
-----------------------------------------------------------------------------------------------------------
11 100 200 100 23-10-12 12:00:00.000000000 AMY
22 200 100 200 22-10-12 12:00:00.000000000 AMN
32 100 200 101 24-10-12 12:00:00.000000000 AMY
[code]....
Research_paper:
id name
----------
1A
2B
Expected result :
r_paper_id created approved unique_users
-----------------------------------------------
1 3 2 4
2 3 2 3
I wrote the following query for that :
SELECT rp.id r_paper_id,
COUNT(*) created,
COUNT(
CASE
WHEN a.approved_yn = 'Y'
[code]....
But it fails, saying that 'single-row subquery returns more than one row' when I introduce the 'unique_users' clause. The remaining fields of the output are correct.
I have changed from the "ARCH" attribute to "LGWR" attribute of the LOG_ARCHIVE_DEST_n initialization parameter. But I have not changed the protection mode(Maximum Performance). I would like to know whether there is any impact in the behavior of the database, if we do not change the mode from "MAXIMUM PERFORMANCE" to "MAXIMUM AVAILABILITY"?
View 3 Replies View RelatedI need to make my database to ARCHIVELOG mode when i try it it gives below following error
SQL> alter database archivelog;
alter database archivelog
*
ERROR at line 1:
ORA-00265: instance recovery required, cannot set ARCHIVELOG mode
what is the techniques to set the archive mode in oracle database on???????
View 4 Replies View Relatedwhich commands only we can use in database mount mode?
View 7 Replies View RelatedI have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED******************
configure channel 1 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
configure channel 2 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U';
CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
*******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN**************
rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental
rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND
CONNECT TARGET SYS/ORACLE@ORCL
*******************************************************
********INCREMENTAL BACKUP COMMAND*********************
RUN
{
BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE;
BACKUP ARCHIVELOG ALL DELETE INPUT;
}
********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
does the source database have to be open in read-only? or can it be online at the time of exporting?
*do not take mean-while running transactions into consideration, I will do it at night when nobody's working.
How i create Standby Database in Same HOST, we using SUN OS 5.8.
I read form Oracle DOC that i can create Standby Database in Same HOST and follow the tutorial , but when i try to mount standby database using ALTER DATABASE MOUNT STANDBY DATABASE EXCLUSIVE; i got a error message ORA-01102: cannot mount database in EXCLUSIVE mode
I performed Shutdown Immediate in Oracle 8I and now I am unable to mount the database.I'm getting the following message: ORA-01102 Cannot mount database in Exclusive mode/I only have one database running on this machine. It was automatically created by Oracle installer upon installation of Oracle software. I can no longer connect via SQL * Plus,Only through Server Manager (connect internal)
View 8 Replies View RelatedI'm trying to create a physical standby database on my Oracle9i DB runing on WinXP.
Note: I have both Primary and Standby on the same system.
Actually everything went well .... I did created the standby DB but the problem is I can not start my primary DB if my standby DB is mounted. I get this error:
ORA-01102: cannot mount database in EXCLUSIVE mode
And when I read about the error message I learnt that I should start my DB in compatible mode ...
The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups. There are are 200+ databases running on OEL, RHEL and Windows. So we planned to host the recovery catalog database on Oracle Active DataGuard 11.2.0.1 Enterprise Edition on RedHat EL 5.8 version on two physical servers.
The Primary Instance will be in one server in the Primary DC and the Standby Instance will be on another server in another DC. Also all the database datafiles are hosted in ASM Diskgroups on SAN (DATA, FRA, REDO, ARCH diskgroups). Are there any specific RPM/patch/OS user custom/specific settings or configurations needed..?
How to find applied_time in standby database managed recovery mode (*PHYSICAL STANDBY*).
View 3 Replies View RelatedI have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log
Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
I am trying to clone a database on another server with different direcory structure. So that path on the source db server are /u04 whereas on on target db server it would be /u03.
Since this I am testing it on small database initially I have kept all datafiles, backup and archivelogs at /u04 and /u03 on the source and target db servers respectively Now I have copied the backups from source db server to target and since path is changed, I cataloged it
However during restore I am getting
Quote:ORA-19870: error reading backup
Here are the session details
RMAN> catalog start with '/u03/oradata/db7fra';
searching for all files that match the pattern /u03/oradata/db7fra
List of Files Unknown to the Database
=====================================
File Name: /u03/oradata/db7fra/DB7/archivelog/2011_03_15/o1_mf_1_16_6qyvpb3w_.arc
File Name: /u03/oradata/db7fra/DB7/backupset/2011_03_15/o1_mf_annnn_TAG20110315T123018_6qypyv5v_.bkp
[code].....
I have altered permissions on the backup files as well but of no use
oracle@dev-biz:/u03/oradata/db7fra/DB7/backupset/2011_03_15 $ls -ltr
total 545260
-rwxrwxrwx 1 oracle dba 12419072 Mar 15 13:52 o1_mf_ncsnf_TAG20110315T123008_6qypyrz2_.bkp
-rwxrwxrwx 1 oracle dba 3072 Mar 15 13:52 o1_mf_annnn_TAG20110315T125043_6qyr54to_.bkp
-rwxrwxrwx 1 oracle dba 426496 Mar 15 13:52 o1_mf_annnn_TAG20110315T125006_6qyr3zk4_.bkp
-rwxrwxrwx 1 oracle dba 14336 Mar 15 13:52 o1_mf_annnn_TAG20110315T123018_6qypyv5v_.bkp
[code].....
I've read a lot about the different types of backup available with Oracle (hot and cold backup). However, I was thinking of a different way of performing this task. I'm currently using Windows Server 2008 R2 and Oracle 11g Standard Edition. I'd like to schedule an entire backup of my server via the utility "Windows Server Backup" (available for free).That way, I could recover my entire server with all the programs and files in case the latter crashes.I'm wondering if this solution could be used as a way of backing up (and recovering) the Oracle database. Should I still set up a regular hot backup with the Archivelog mode enabled in case some operations/transactions were being done at the time of the crash (for the data integrity)?
View 2 Replies View Relateddatabase size is 30GB is it recommended for RMAN backup
View 2 Replies View Relatedcan we restore database from obsolete backup using rman
View 2 Replies View RelatedSQL> SELECT * FROM V$VERSION;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
after i backup my database,i check the alert log ,i found the following errror:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
[code]....
the trace number 26967 :
[oracle@shenzhengair archivelog]$ cat /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
/u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
[code]....
what does the error mean?
online backup done thru RMAN.Suppose i am taking online backup of full database. During the backup, user's are inserting/deleting/modifying data. This data is getting stored as online archives. Once the database backup is finished, how these archives are applied to the database to make the database up to date.
View 1 Replies View RelatedHow to setup the database for automated RMAN backup. like if we want to have a backup exactly at 8:00 PM IST. So how to configure it.
View 6 Replies View Related