ORA-19602 / Cannot Backup Or Copy Active File In NOARCHIVELOG Mode Message
Mar 31, 2011
I am trying to backup a database and am having a couple problems:
1. When I log into RMAN for the database in question and run a simple backup database I get:
Quote: ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode message
2. I then logged into sqplus and shutdown / restart the database
3. when I try to restart it - it fails to starup claiming:
Quote: sqlplus Error: ORA-12560: TNSrotocol adapter error
4. I have tried to login in locally (not using Quote: @<dbasename> but I get the same error message as above. I have set ORACLE_SID and LOCAL to the database name and still the same TNS name error
View 2 Replies
ADVERTISEMENT
Dec 30, 2011
after setting a full database backup and restore in noarchivelog mode , i would like to perform backup and restore just a tablespaces.
View 1 Replies
View Related
Jan 27, 2013
My RMAN backup failed with below error.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 01/26/2013 22:48:56
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current
ORA-00258: manual archiving in NOARCHIVELOG mode must identify log
RMAN>
Recovery Manager complete.
View 2 Replies
View Related
Jul 25, 2012
We are using oracle as database in our application. For high availability we have a cluster of multiple nodes and the data is replicated using oracle streams. All the nodes in the cluster are active. We do not have any concept of stand-by.
Now we are planning to use oracle RMAN for backup and recovery. RMAN user's guide doesn't recommend any strategies for such deployments. It mainly focuses on primary/stand-by deployments.
View 1 Replies
View Related
Oct 22, 2013
I want to create binary copy of control file every time I do backup. I am using sql "alter database backup controlfile to ''+FRADG/TESTDB/controlfile/controlfile.ctl'' "; in my rman backup script. If I run it second time I got errors as it does does not allow to overwrite existing one.
View 5 Replies
View Related
May 31, 2013
I have installed oracle 11.2 on virtual machine and made two copy of this vm i.e vm1 and vm2...i have taken fullbackup with rman on vm1 and autobackup of control file.Now i want to restore this backup on vm2, for this i have configured channel and other setting. run following command
catalog start with '\server3database_backup
manC-3507808503-20130531-00';
"C-3507808503-20130531-00" is the name of control file autobackup.
RESTORE CONTROLFILE ;
it gives me error RMAN-06496: must use the TO clause when the database is mounted or open...then i use following command
RESTORE CONTROLFILE to 'C:oracleAdministratororadataslate';
then it gives me error RMAN-06024: no backup or copy of the control file found to restore...how to restore control file to vm2
View 3 Replies
View Related
May 24, 2012
I have a scenario like while taking the hot backup i forgot put end backup mode,at the same time one of user u1 updating some lacks of recordsinto the T1 table.at some time he wants rollback.and my redolog file size is very less.is it possible to rollback? if yes how?
View 3 Replies
View Related
May 9, 2011
if I could execute the 'ALTER DATABASE BEGIN/END BACKUP' while in NOARCHIVELOG MODE.
View 6 Replies
View Related
Mar 12, 2011
I have a doubt in RMAN. The scenario is: We take online backup on all days and offline backup on Sunday only. My question is do i need to copy the archives also in offline backup?
What happens when i shutdown the database (the database is in archivelog mode) and alter the database to be in noarchivelog and open the database to do offline backup.
View 6 Replies
View Related
Dec 6, 2012
I have a active data guard database which is copy of my production database. can i backup the active database using RMAN? The ADG is a read only and dont know, if RMAN can backup an read only database.
View 4 Replies
View Related
Nov 2, 2011
I'm trying to set up active database duplication between 2 Oracle 11g servers.
Both servers were set up with identical configurations (same directory structures, file systems, SIDs, and sys passwords.) Both oracle instances were created at the time of software installation.
Here is how things are configured:
- Version: Ora11gR2
- Oracle service name: orcl
- File system: ASM
- OS: Windows Server 2008
I've done some research and found several sources giving instructions on how to set up active database duplication (including a blog engry by rajabaskar on this site), but each site seems to have different details.
So, here's what I have so far:
- Set up entries in each TNSNames file... each has an entry 'src' and 'dst' (for source and destination)
- A new listener has been added on the source machine
- on the destination machine, run the 'oradm' to create a new SID. However, is this really necessary? Since the service names are already the same
- I'm also supposed to create a password file on the destination machine using orapwd. Again, is this necessary, if I'm using the same passwords on both machines?
Am I on the right track? Should I have created an actual database on the destination machine or should I have started with just the software installed?
View 1 Replies
View Related
Aug 25, 2010
I have Oracle loaded on a server. I have three database instances - /db1, /db2, /db3. I want to put the database in backup mode before I take a backup copy of the three database instances.
Is the database put in backup mode just once and then the three instances can be backed up? Or does each instance need its own script to put the database in backup mode?
View 4 Replies
View Related
Nov 25, 2012
I see following warning message in alert log file.
Quote:WARNING: OMF is enabled on this database. Creating a physical standby controlfile, when OMF is enabled on the primary database, requires manual RMAN intervention to resolve OMF datafile pathnames.
NOTE: Please refer to the RMAN documentation for procedures describing how to manually resolve OMF datafile pathnames.
Is it just an information or something like warning message we need to look into it.
View 1 Replies
View Related
Aug 24, 2011
changing archive mode during DB running.Before in 9.2, 'ALTER SYSTEM ARCHIVE LOG START/STOP' is available for this job. But, after 10g/11g, it cause 'archive log stop has been deprecated'.
However, for my practice, I need to estimate archived logs size before backup them, so I need to stop archive log for a while and enable it later during DB running.
I check Oracle documents, it only mentions changing archive log mode at DB mounted but not open.
View 12 Replies
View Related
Aug 8, 2012
on our 10.2.0.5 database, when we run full backup, my system performance comes to an halt. we run full backup and then do a validate backup to validate the structure of the database etc. Database performance takes a hit and all of the application connections goes in wait mode: On ASH or AWR - this is the top wait i see:
RMAN backup & recovery I/O
Event % Event P1 Value, P2 Value, P3 Value % Activity Parameter 1 Parameter 2 Parameter 3
RMAN backup & recovery I/O 22.22 "1","32","2147483647" 21.79 count intr timeout
what can we do to over come this issue?
View 3 Replies
View Related
May 21, 2011
i have one database name tom on my one pc its name is rose1 now i have to place this my tom database to on my another pc its name is rose2.
i do not want to use rman.
How can i place this tom database from rose1 pc to rose2 pc and my this tom database is in archive mode and my this tom database is in rose1 pc and my rose1 os is windows xp 32bit and i want to transfer this database to on my rose2 pc and the os of rose2 pc is windows 7 64 bit.
View 4 Replies
View Related
May 30, 2012
We have been getting the below error message, while backing up the DB(Full DB backup) via netbackup. The DB version is 10.2.0.3 (64bit). The archive backup goes fine. the problem is with the full backup.
input datafile fno=00241 name=/u106/oradata/iwhdbqa/iwh_mvlog_01x.dbf
channel CH02: starting piece 1 at 29-MAY-12
RMAN-03009: failure of backup command on CH01 channel at 05/29/2012 21:41:28
ORA-19506: failed to create sequential file, name="iwhdbqa_20120529210533_db_ipnc7n6l_1_1", parms=""
[code]...
I came to know that this is a netbackup configuration/client bug. Can we do something from the oracle side.
The RMAN COMMAND STRINGS we use is as follows:
SET SNAPSHOT CONTROLFILE NAME TO '/u101/app/oracle/product/10.2.0.5/db_1/dbs/iwhdbqa_snapshot_db.snap';
RUN {
ALLOCATE CHANNEL CH01 TYPE 'SBT_TAPE' parms='SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so64.1' ;
SEND 'NB_ORA_SERV=atlbackupmaster, NB_ORA_POLICY=iwh-dbqa_oracle, NB_ORA_CLIENT=iwh-dbqa-bu';
ALLOCATE CHANNEL CH02 TYPE 'SBT_TAPE' parms='SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so64.1' ;
[code]...
View 3 Replies
View Related
May 15, 2013
Version Details:
O.S Version HP-UX B.11.31 U ia64
Oracle DB Version 11.2.0.3.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Scenario :
Using RMAN Active cloning to duplicate a RAC database from Production to Development environment.
Problem:
At the end of the cloning the below errors are reported;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
How to prevent the error of RMAN-06054: media recovery requesting unknown archived log for thread with sequence and starting SCN of while performing the RMAN Active Cloning? I do NOT want to use UNTIL clause.
View 5 Replies
View Related
Aug 12, 2010
We usually copy backuppeice from disk to tape usig RMAN.Is there any option to copy the backupeice from tape to disk.
View 17 Replies
View Related
Mar 29, 2011
Iam using Oracle 10g Release 10.1.0.3.0 Database and Linux Operating System for Server. I have a Stored Procedure which generates a Text File in Oraload Folder. Can I copy it to /home/ftp-docs/ using utl_file.fcopy ? If yes, how to do it ?
View 1 Replies
View Related
Oct 15, 2013
I am getting starting with rac environments. I need to configure a two nodes active/active with rac and I need to know if always using rac both nodes will be active or if I have to do that at some point when installing. I have reading some docs from oracle and others authors about rac and its configuration process but that is not understood for my yet.
View 5 Replies
View Related
Feb 3, 2011
I want a copy of data from oracle database in Production to my local machine as upgrade is going to be there soon. How can I do that so that I may check my old data later irrespective of upgrade?
View 9 Replies
View Related
Feb 17, 2012
I have a Report which run in character mode format, well i cannot convert or Generate to File as a XML File.
XML Conversion Error:
REP-1401: 'cf_1formula': Fatal PL/SQL error occurred. ORA-01403: no data found
PDF Conversion Error:
REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, or RTF
But, when i change Character Mode to Bitmap or Default i can able to Generate to File.
So i Like to know is it possible to Generate to File in Character Mode?
View 1 Replies
View Related
Oct 9, 2013
i want table data exported to txt file, data is around 3200000,
View 14 Replies
View Related
Nov 12, 2012
I tried to convert a physical SuseLinux with Oracle 9i Machine into an virtual Machine (esxi Server 5.0). (VMware vCenter Converter ) Before started I shutdown database:
su – oracle
sqlplus ‘/ as sysdba’
shutdown
and the run converter.
But i have problem with copy /u01 and /u02 (database files) "Error: Unable to clone the volume mounted on '/u01' "
So i want clone machine without /u01 and /u02 then copy file. What I should do to be correctly?
View 5 Replies
View Related
Jan 22, 2013
I am using oracle 10g version 10.2.0.1.0.
Can I use user-defined functions in my sql*loader control file and load in DIRECT path mode?
View 1 Replies
View Related
Jul 12, 2012
I need to copy .CSV File from a Windows Server shared path (\hostnameoutput) to another server which i believe is on unix.The other server name is abc.hcl.com. On this server i need to put it in the root directory. I will have to use SFTP and not FTP.
View 19 Replies
View Related
Oct 31, 2011
how do i copy an image or a text file from ex: directory c to directory d
View 5 Replies
View Related
Feb 2, 2012
I have a forms that generate a file from database into database server and copy it to client machine by the follow process:
IF webutil_file_transfer.Is_AS_readable(V_server_way || V_file_name) THEN
l_success := webutil_file_transfer.AS_to_Client
(clientFile => :V_screen_way
[code]...
But is showing the erro ora-105100 in one client machine
View 9 Replies
View Related
Oct 2, 2013
We want to copy a file from a remote machine to the DB server. copy \<IP_ADRESS>SHARED_FOLDERsome_file.sql d:copied_file.sql
I've used Java and a wrapped it into a PL/SQL procedure so I can do :
exec run_os_command(p_command => 'copy \<IP_ADRESS>SHARED_FOLDERsome_file.sql d:copied_file.sql');
The file was not copied.
I have mapped \<IP_ADRESS>SHARED_FOLDER to x: for example and issued : exec run_os_command(p_command => 'copy x:some_file.sql d:copied_file.sql');
The file was not copied.
But when I issued from the OS prompt copy x:some_file.sql d:copied_file.sql then the file is copied.
What can I add to the PL/SQL procedure so it wil work ?
View 19 Replies
View Related
