Forms :: Updating Records Values And Post Trigger
Jul 15, 2013
I have a multi record block based on a view. All records in the view are displayed in the block by use of Post-Query trigger when entering the form.
The block has 5 items as follows:
1) RECORD_STATUS = a non-base table column which is a checkbox.
2) ITEM_TYPE = a text-item which has an LOV attached.
3) ITEM_TEXT = a text-item which is free format text.
4) LAST_UPDATE_DATE a date column
5) STATUS = a text item either 'Open' or 'Closed'
The LOV is based on a table of Item Types with values say, 'Type1', upto 'Type9'.
I have a Wnen-New-Record-Instance trigger which 'Posts' changes to the database. This has been included as i want to limit the values of the ITEM_TYPE column to values which have not been previously used.
Consider this scenario...
The block has 3 records.
record 1 has 'Closed' status so no updates are allowed.
record 2 has 'Open' status so updating of Item_Text is allowed.
record 3 has 'Open' status so updating of Item_Text is allowed.
I check the RECORD_STATUS checkbox on record2.
(This sets the RECORD_STATUS checkbox to a checked value and changes the STATUS column to 'Closed' by When-Checkbox-Changed trigger.) At this point the record has not been saved so if you uncheck the checkbox , then the STATUS column will go back to 'Open'. However at this point i will leave it as Checked (Closed).
I then insert a new record, only values Item4 to Item 9 are correctly shown in the LOV. I select Item4.
I then go back to the previous record and uncheck the Checkbox to say that i wish to leave it 'Open' after all (in effect no changes have occurred), then the STATUS column correctly reverts back to 'Open' by my WCC trigger. If i then SAVE the changes, the new record has been inserted on the database correctly, however the LAST_UPDATED_DATE from the record which was checked and then unchecked has also been updated incorrectly even though no net changes have actually occurred.
(because i am using WNRI trigger to limit the List of Values on the LOV column, this has incorrectly set the previous records LAST_UPDATED_DATE column to be Sysdate.)
How can i stop this from happening?
View 1 Replies
ADVERTISEMENT
Apr 16, 2013
I am learning oracle trigger, i have one query.
Can i increment the old column value in trigger.
eg: :new.cid := :old.cid+1;
is this is correct.
View 4 Replies
View Related
Jun 12, 2012
I have an issue with the oracle forms trigger. This is the scenario. The form is a query only form . A user can only query on this form . No update or insert is allowed.
The base table say TABLE1 consists of these fields. 1) pro id, pro item, empno , fname, lname, deptno .
The user can query on all items except the fname and lname.
The issue is few records in the TABLE1 have null values for the empno.
When the user queries on proid, pro item , empno or deptno - when the empno on TABLE1 is not NULL , the fname and lname should be fetched from a different table say TABLE2. otherwise, if the empno on TABLE1 is null , the fname and lname from the same table i.e, TABLE1 are retrieved. I have tried with the post change trigger on empno . Also tried the When validate item trigger . But it doesnt work the way it is expected to. what is the appropriate trigger that must be used.
View 22 Replies
View Related
Jan 11, 2011
I create a master detail form. I created also a post quey trigger, inside I wrote the code below.A cursor looks to another table and returns to the form some values i need!
declare
cursor C1 is
select apofaa, startdate, enddate, transport
from trapofdet
where trapofdet.apofcode = :trapof.apofcode;
[code]....
How to solve the
a. frm-40737, illegal restricted procedure go block in post-query trigger
b. It seems tha returns all the records but it appears only the last one.
View 2 Replies
View Related
Feb 8, 2013
I have this layout
[URL]
and a post trigger insert and update
IF :item1 IS NULL
AND :item3 IS NOT NULL THEN
alert_id := FIND_ALERT('blank_alert');
SET_ALERT_PROPERTY(alert_id,ALERT_MESSAGE_TEXT,'Item3 must have a value.');
v_alert := SHOW_ALERT(alert_id);
RAISE Form_trigger_Failure;
END IF;
My problem was as it fires, the cursor will be on the item1. I've already use
SET_ITEM_INSTANCE_PROPERTY
NEXT_ITEM
GO_ITEM
but it was all illegal. The cursor must be in the item3.
Don't question me why I do not set the item3 to required and why post triggers. It is just that. It is the requirement.
View 4 Replies
View Related
Feb 9, 2011
I am facing a post trigger problem.No error while compiling.
DECLARE
mYPACCT VARCHAR2(10);
mTRNNO NUMBER; mVNO NUMBER; mSR NUMBER; mNARRATION VARCHAR2(200); mCHCODE VARCHAR2(10); mPARTY VARCHAR2(200);
mBRAND VARCHAR2(200); mYARN VARCHAR2(200);
BEGIN
BEGIN
SELECT YPACCT INTO mYPACCT FROM CONFIG;
EXCEPTION WHEN NO_DATA_FOUND THEN NULL;
END;
[code].....
View 7 Replies
View Related
Aug 12, 2010
I have a form w/a tab canvas. BlkA is on Tab1 and Blk2 is on Tab2. In BlkA I have several items that have when-validate-item triggers. However, the trigger does not fire when I enter a value into item1 of BlkA followed by clicking on Tab2. To solve, I placed validate(form_scope) in the When-Tab-Page-Changed trigger. This works well with invoking the validation. However, focus remains on Tab2 (Blk2).
I would like focus to return to failed validation item in Blk1. I can capture the block name using :system.cursor_block in the Post-Block trigger of BlkA, assign that value to a form parameter and when a validation fails via the When-Tab-Page-Changed trigger I can return user back to BlkA(Tab1). However, I need direction on how to return user to the specific item in BlkA that failed validation
View 2 Replies
View Related
Jul 26, 2010
I have sort button that have the following code
go_block('TEL_OTHER_INFO');
set_block_property('TEL_OTHER_INFO',order_by,:system.cursor_item);
execute_query;
I have in the same form display item that its value will be sitting according to the post trigger of the previous text field when i press the sort button i get frm-40735 post-text-item unhandled exception Ora-01403 error.
View 2 Replies
View Related
Jan 9, 2013
I am running APEX 4.0.2.I am having an issue where I have a page item that has a post calculation
My source used is "Always..."
My source type is "Database Column"
I have tried putting the code in the page item under "Post Calculation Computation", as a dynamic action, and as a Computation Process. It displays properly on the form no matter where I put the code, but when I select Apply Changes it is not updating the database. What am I doing wrong? I have provided a sample of the code, and yes the column name is in the database.
CASE
WHEN :P12_NUM_OF_BOOKED_DEALS>0 AND :P12_DATE_1ST_COMPLETE IS NULL THEN '(2) In Process'
ELSE '(D1) Open Draft'
END
View 2 Replies
View Related
Mar 30, 2010
I have a form with two data blocks, one parent, one child block.
The parent is holds mineral lease info while the child holds the mineral owner info, such as addresses and phone numbers. One owner can be in the owner block multiple times (different owner types). The form only displays one owner at a time.
We have a separate master owner table which holds owner address. (We set it up this way because we get electronic info from mineral companies that we have to load each year).
As you tab through the owner block, it checks the FEIN against the master table and pulls updated address info from the master table.
I have a problem in which if an owner is on the lease multiple times, when you tab through the first instance, it pulls in the new address info, but when you go to the next instance, it won't update. If you requery, it seems that the first update actually updated all the owner records on that lease. How can I turn this off?
View 13 Replies
View Related
Jul 5, 2010
I have a non-base-table item which I want to update in the pre-update trigger of the current block.
If the content of the field exceeds 4000 characters, i get the error message
ORA-01461: can bind a LONG value only for insert into a LONG column.
The code is
update tab set long_col = :formsblock.long_col
where tab.tabpk = :formsblock.foreign_tabpk;
Workarounds would be,
1.) to delete the old dataset and insert the new one:
delete from tab
where tab.tabpk = :formsblock.tabpk;
insert into tab (tabpk, long_col) values
(:formsblock.foreign_tabpk, :formsblock.long_col);
or 2.) to change the Item from a non-database item to a database item and use the internal update of the forms-module, but both workarounds are not very satisfying.
Do you know another way to update the LONG-column within the pre-update trigger (or any other PL/SQL part of forms)?
View 2 Replies
View Related
Jun 8, 2013
I AM WORKING ON FORM I WANT TO SAVE THE RECORD IN TO TABLES TABLE1,TABLE2 AFTER UPDATING THE
TABLE1..BOTH THE TABLE HAVE SAME COLUMNS'.
WHAT IS THE TRIGGER FOR THAT
View 2 Replies
View Related
Sep 30, 2010
I am facing a problem while inserting primary keys using a sequence. Following is my case
I have a Master Table, say M_A, and 2 detail tables D_1 and D_2. I am trying to generate primary keys for the master and detail table as well as the reference keys for the detail tables using sequence.
I created a pre-insert trigger, say preInsertTRIG
proc_ABC(pri_key_master OUT VARCHAR2,
pri_key_detail1 OUT VARCHAR2,
fk_detail1 OUT VARCHAR2,
pri_key_detail2 OUT VARCHAR2,
[Code] ........
I am able to insert the P.K of the master table as well as P.K of one of the detail table. However, it fails to insert the P.K of 2nd detail table and reference keys for both the detail tables. I know there are other simple methods available in Forms, but I have to do it by this procedure only
View 5 Replies
View Related
Feb 14, 2013
I have two tables one is
1)create table abc(c_name varchar2(10),c_number number(6),c_loc varchar2(8)); --having values
2)create table temp(sname varchar2(10),sid number(4),address varchar2(10));---no having
and my question is how to insert a values into temp using when-button-pressed trigger based on abc table in oracle form.
View 16 Replies
View Related
Mar 28, 2011
I am developing form, but there is issue when I Press F11 to query data.I make trigger form when-new-record-instance to assign values for item.But when i Press F11 then Block no clear.
View 1 Replies
View Related
Jul 11, 2013
I have two different tables having similar structure but data is coming from different source.finally i want to update the view so that the it should affect the base table.
create table emp1 as
select empno,ename,job,deptno,sal from emp where deptno=10;
create table emp2 as
select empno,ename,job,deptno,sal from emp where deptno=20;
create view emp_view as select * from emp1 union all select * from emp2;
[code].......
View 13 Replies
View Related
Oct 20, 2011
Oracle 11.2 - The goal is to create a trigger on table and anytime an update, delete or insert is done on the table, write values to a second table. I have the trigger and it works except it is not loading my col1/PK values. I understand I need to do a new/old value. Col1 is my PK on Table that I want to load anytime there is an update/delete/insert on the table. How do I code the old/new variable?
My
CREATE OR REPLACE TRIGGER TRIGGER_NAME
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NAME
FOR EACH ROW
DECLARE
v_col1 TABLE_NAME.COLUMN%TYPE;
BEGIN
[code]...
View 5 Replies
View Related
Mar 8, 2007
I'm using an 'On-Update trigger' to replace the default Form Builder processing for updated records. When I try to change a column in the form I get: ORA- 01446: cannot select ROWID from, or sample, a view with DISTINCT, GROUP BY, etc.
The on-update doesn't fire. How do I get around this. The block is based on a view.
View 9 Replies
View Related
Sep 12, 2013
I have created the following trigger whcich will track all the column changes and insert the row in log table. here i have some doubt while substituting the cursor value.
create or replace trigger historylog_trigger
before update on log_dev_test
for each row
declare
PRAGMA AUTONOMOUS_TRANSACTION;
in_loamid number(10);
in_col_name varchar2(10);
in_old_val varchar2(100);
[Code]..
are the below assignement of values will work ?
in_old_val:= ':old.'||r.column_name;
in_new_val:= ':new.'||r.column_name;
i want to take the coulmname from the cursor and assign tat to psuedo columns like :new.r.column_name .
View 8 Replies
View Related
Jun 6, 2012
Im looking for the posibility to update some records using new id with the column values with another id
example
the table contains these records:
id gross net
========================
7 0,1 0,0507749
8 0,2 0,1015499
9 0,5 0,2538748
10 0,83 0,4214
11 0,85 0,4315873
[Code]....
and I would like insert the same gross and net column values of ids 7 to 16 into columns with the ids 40 to 49 in the same order. therefore I would like to obtain the result that I describe below:
id gross net
========================
7 0,1 0,0507749
8 0,2 0,1015499
9 0,5 0,2538748
10 0,83 0,4214
11 0,85 0,4315873
[Code]....
View 4 Replies
View Related
Feb 21, 2012
I get a "ORA-00922 missing or invalid option" after compiling the following trigger:
create or replace
trigger aifer_transfer
after insert on transfer
for each row
[code]......
I want the trigger to affect the transferring account (from_account) with minus the "amount" being transferred from it, and the account transferred to (to_account) with plus the "amount" being transferred to it. My tables looks as following:
TRANSFER
----------------------------------------- -------- ------------
ROWNR NOT NULL NUMBER(9)
PNO NOT NULL VARCHAR2(11)
FROM_ACCOUNTNO NOT NULL NUMBER(8)
TO_ACCOUNTNO NOT NULL NUMBER(8)
AMOUNT NUMBER(10,2)
DATE NOT NULL DATE
ACCOUNT Null? Type
----------------------------------------- -------- ------------
ACCOUNTNO NOT NULL NUMBER(8)
KTNR NOT NULL NUMBER(6)
REGDATE NOT NULL DATE
BALANCE NUMBER(10,2)
View 5 Replies
View Related
Feb 18, 2013
I have a table EMPLOYEE with columns employee_id and status. I have a requirement that when an employee status is getting changed, then even its linked employee's status also should be changed to the same status value. For this, I need to handle the updating of linked employee's status using a trigger.
Since we get mutating trigger issue when try to update the originating table, I am trying to go with the approach of "in place of a single AFTER row trigger that updates the original table, resulting in a mutating table error, you may be able to use two triggers. The first is an AFTER row trigger that updates a temporary table, and the second an AFTER statement trigger that updates the original table with the values from the temporary table".
But however I am still facing the same issue.
Test case:
CREATE TABLE EMPLOYEE
(
EMPLOYEE_ID VARCHAR2(1),
STATUS NUMBER(9)
);
INSERT INTO EMPLOYEE VALUES ('A',1);
INSERT INTO EMPLOYEE VALUES ('B',1);
commit;
[code]....
Also, any alternate options (rather than using 2 triggers with temp table).
View 7 Replies
View Related
Apr 27, 2011
EBS version is 12.1.3. we need to update the e-mail address in per_all_people_f in Oracle EBS based on a trigger that will fire against a column in Oracle Internet Directory (OID). A trigger will be built against table ct_mail, column attrvalue. When a value is inserted or updated this value will use an api on the EBS database to update per_all_people_f.
Q => Is ct_mail the correct table to use in OID for email addresses? or can you confirm a different table?
Q => If Ok to use ct_mail as the table can you see any problems with using a trigger in OID?
Q => Finally is a database link between OID and EBS database the best way for the trigger to work?
View 2 Replies
View Related
Jul 12, 2012
i'm using the below query to update a VOTER table with over 15million records but it's taking ages to finish. i am using 11gr2 on linux
the query:
MERGE INTO voter dst
USING (
SELECT voterid,
pollingstation || CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY pollingstation
[code]........
View 6 Replies
View Related
Nov 22, 2011
I have made a correlated update statement using rowid. Find my attachment. Its updating all columns which i wanted but issue is that its not updating in 1st commit.
Suppose 6 rows is to be updated, then in 1st commit its updating 1 record, then in 2nd commit its updating 2nd record and so on. And in Toad its showing 6 rows updated in 1st commit, then 5 rows updated in 2nd commit and 1 rows updated in last record. I want that all records to be updated in first commit only.
View 4 Replies
View Related
Aug 1, 2012
I need to update column of a table with +,- 70,000,000 records.
If I perform an update it lasts......too much and does not finish!
View 6 Replies
View Related
Oct 29, 2012
OS:Solaris
DB:10G
I have a situation where there are multiple records for a join criteria. I am trying to find a way to update a particular column for all the records returned by the join criteria. Example :
Table A
id number
1 1000
2 2000
3 3000
4 4000
Table B
id number
1 9999
1 9999
1 9999
1 9999
1 9999
1 9999
2 8888
2 8888
3 6666
3 6666
Result after update:
Table B
id number
1 1000
1 1000
1 1000
1 1000
1 1000
1 1000
2 2000
2 2000
3 3000
3 3000
update query ? When I use a update statement with where exists it errors out because the query returns more than one row for the join condition.
View 2 Replies
View Related
Nov 30, 2009
my simplified database schema is:
Order
OrderID
Status
OrderItems
OrderID
EAN
Amount
Store
EAN
Amount
now,I need trigger that will on updating table Order and changing status to "GoodsReceived" increase amounts in Store according to values in OrderItems.
create or replace trigger order_received_trigger
before update
on Order
for each row
begin
if (:old.status=4 and :new.status=1) then
/*
select ean, sum(amount)
from OrderItems
where OrderID=:old.OrderID
group by ean;
*/
end if;
end;
but now i dont know how to apply that select on table Store.
View 2 Replies
View Related
Aug 13, 2010
I am trying to bulk update records in oracle using XML , front end is vb.net.Now the problem when i updating for 1000 - 5000 records on my development server. Its getting updated.
But when we are updating on the production server for 100000-200000 records , we receive error
"ORA-01460: unimplemented or unreasonable conversion requested "
View 1 Replies
View Related
May 30, 2013
I need to find the identical rows in the below table based on ID column and update the previous identical record's end_date with latest record's start_date-1.
"ID" "NAME" "START_DATE" "END_DATE"
1 "a" 05-MAR-10 31-DEC-99
1 "B" 30-MAY-12 31-DEC-99
1 "C" 30-MAY-13 31-DEC-99
2 "A" 02-APR-10 31-DEC-99
2 "B" 02-APR-10 31-DEC-99
2 "C" 30-MAY-12 31-DEC-99
3 "C" 04-MAR-10 31-DEC-99
Result should be like below format..
"ID" "NAME" "START_DATE" "END_DATE"
1 "a" 05-MAR-10 29-MAY-12
1 "B" 30-MAY-12 29-MAY-13
1 "C" 30-MAY-13 31-DEC-99
2 "A" 02-APR-10 01-APR-10
2 "B" 02-APR-10 29-MAY-12
2 "C" 30-MAY-12 31-DEC-99
3 "C" 04-MAR-10 31-DEC-99
View 7 Replies
View Related
