I am facing a post trigger problem.No error while compiling.
DECLARE
mYPACCT VARCHAR2(10);
mTRNNO NUMBER; mVNO NUMBER; mSR NUMBER; mNARRATION VARCHAR2(200); mCHCODE VARCHAR2(10); mPARTY VARCHAR2(200);
mBRAND VARCHAR2(200); mYARN VARCHAR2(200);
BEGIN
BEGIN
SELECT YPACCT INTO mYPACCT FROM CONFIG;
EXCEPTION WHEN NO_DATA_FOUND THEN NULL;
END;
[code].....
I am trying to build one custom 10g form from TEMPLATE.fmb. when i try to compile my form in desktop it is giving error as Error FRM-40735: ON-ERROR trigger raised unhandled exception ORA-6508.
View 1 Replies View RelatedI am using forms 10g developer suite, AIX in appl server.
When I run the form on my local drive through web I am getting error that,FRM-40735:ON-ERROR trigger raised unhandled exception ORA-06508.
My fmbs & fmxs are in e:fmb, libraries are in d:applicationlib.
FORMS_PATH in Registry is C:DevSuiteHome_1cgenf61admin;C:DevSuiteHome_1forms;e:fmb;d:applicationlib
I have set the same path in default.env also.What should I update, to run the form successfully.
I am in process of migrating Oracle 6i Forms to Oracle 10g Forms.
In 6i, the Form compiles and runs without any giving any error.
In 10g it does complie without any error but gives following Runtime Error Message -
FRM-40735: ON-ERROR trigger raised unhandled exception ORA-06508
I am using database 10g and Form 6i. We are working under client server technology. Frequently we are receiving the following error to every user at randomly when they are idle few seconds/minutes.
FRM-40735 or error trigger raised unhandled exception ora-03114
I have a form which contains tabular layout which i can fill a text item with date format. I set the data type properties to "Date" with format mask "dd-mm-yyyy".When I click a "save" button, it will call a procedure to insert into table. But i'm getting this error message : "FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06502"
I did some search on google and error 06502 means numeric or value error. But I don't understand what caused my error. Is it at my text item's properties?
When i select Filnumber(DEC99) and press QUERY button, i get error"frm-40735 pre-query trigger raised unhandled exception ora-06502".
View 1 Replies View Relatedim updating my program and i got a error message
FRM 40735 key-next-item trigger raised unhandled exception ORA 01722
I getting a error Ora-06511 when-new-item-instance trigger raised unhandled exception.
below is the coding for the trigger when-new-item-instance : where the cursor is open? how to close it?
if :blk_master.action_status = 'A' then
declare
doc_slno number;
[Code].....
frm-40375: when-validate-item trigger raised unhandled exception ORA-01403.
i put a new column which is the birth date and i made a new procedure with regards to the age level for the Plan. and when i run the program, theres an error..
I am trying to insert some values into a table from a form i get the below error;
which says not a valid month;
FRM-40735 WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-01843
after i do google i added the below one to the insert statement and again i receive the error;
to_date(to_char(sysdate,'dd/mm/yyyy'),'dd/mm/yyyy')
My Insert Statement
insert into Invoice123
(Invoiceno, invdate, gross_tot, discount)
values
(nvl(INVOICEno(j),0),
to_date(to_char(invdate(j),'dd/mm/yyyy'),'dd/mm/yyyy'));
commit;
by which format we can achieve this!
I have Forms 6i, installed in a system at remote location with OS Windows 7. Previously the same was installed in Windows XP it was working fine. Now in Windows 7 also its working fine for most of the things, for some data loading options its not working and showing below shown error.
FRM-40735:WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06502
I created my login as you have first to fill the form then login, unfortunately i am getting when i press the button as error frm-40735: when-button-pressed trigger raised unhandled exception ora-04063.
these are the code after fill the form
declare
sex varchar2(10);
emid varchar2(30);
begin
if :signup.gender = 1 then
sex := 'Male';
elsif :signup.gender =2 then
sex := 'Female';
[code]........
when ever the developer connecting to database to generate froms or While trying to create inventory categories below error is appearing.
FRM-40735: On-error trigger raised unhandled exception ora-06508..
I have an issue with the oracle forms trigger. This is the scenario. The form is a query only form . A user can only query on this form . No update or insert is allowed.
The base table say TABLE1 consists of these fields. 1) pro id, pro item, empno , fname, lname, deptno .
The user can query on all items except the fname and lname.
The issue is few records in the TABLE1 have null values for the empno.
When the user queries on proid, pro item , empno or deptno - when the empno on TABLE1 is not NULL , the fname and lname should be fetched from a different table say TABLE2. otherwise, if the empno on TABLE1 is null , the fname and lname from the same table i.e, TABLE1 are retrieved. I have tried with the post change trigger on empno . Also tried the When validate item trigger . But it doesnt work the way it is expected to. what is the appropriate trigger that must be used.
I create a master detail form. I created also a post quey trigger, inside I wrote the code below.A cursor looks to another table and returns to the form some values i need!
declare
cursor C1 is
select apofaa, startdate, enddate, transport
from trapofdet
where trapofdet.apofcode = :trapof.apofcode;
[code]....
How to solve the
a. frm-40737, illegal restricted procedure go block in post-query trigger
b. It seems tha returns all the records but it appears only the last one.
I have this layout
[URL]
and a post trigger insert and update
IF :item1 IS NULL
AND :item3 IS NOT NULL THEN
alert_id := FIND_ALERT('blank_alert');
SET_ALERT_PROPERTY(alert_id,ALERT_MESSAGE_TEXT,'Item3 must have a value.');
v_alert := SHOW_ALERT(alert_id);
RAISE Form_trigger_Failure;
END IF;
My problem was as it fires, the cursor will be on the item1. I've already use
SET_ITEM_INSTANCE_PROPERTY
NEXT_ITEM
GO_ITEM
but it was all illegal. The cursor must be in the item3.
Don't question me why I do not set the item3 to required and why post triggers. It is just that. It is the requirement.
I have a multi record block based on a view. All records in the view are displayed in the block by use of Post-Query trigger when entering the form.
The block has 5 items as follows:
1) RECORD_STATUS = a non-base table column which is a checkbox.
2) ITEM_TYPE = a text-item which has an LOV attached.
3) ITEM_TEXT = a text-item which is free format text.
4) LAST_UPDATE_DATE a date column
5) STATUS = a text item either 'Open' or 'Closed'
The LOV is based on a table of Item Types with values say, 'Type1', upto 'Type9'.
I have a Wnen-New-Record-Instance trigger which 'Posts' changes to the database. This has been included as i want to limit the values of the ITEM_TYPE column to values which have not been previously used.
Consider this scenario...
The block has 3 records.
record 1 has 'Closed' status so no updates are allowed.
record 2 has 'Open' status so updating of Item_Text is allowed.
record 3 has 'Open' status so updating of Item_Text is allowed.
I check the RECORD_STATUS checkbox on record2.
(This sets the RECORD_STATUS checkbox to a checked value and changes the STATUS column to 'Closed' by When-Checkbox-Changed trigger.) At this point the record has not been saved so if you uncheck the checkbox , then the STATUS column will go back to 'Open'. However at this point i will leave it as Checked (Closed).
I then insert a new record, only values Item4 to Item 9 are correctly shown in the LOV. I select Item4.
I then go back to the previous record and uncheck the Checkbox to say that i wish to leave it 'Open' after all (in effect no changes have occurred), then the STATUS column correctly reverts back to 'Open' by my WCC trigger. If i then SAVE the changes, the new record has been inserted on the database correctly, however the LAST_UPDATED_DATE from the record which was checked and then unchecked has also been updated incorrectly even though no net changes have actually occurred.
(because i am using WNRI trigger to limit the List of Values on the LOV column, this has incorrectly set the previous records LAST_UPDATED_DATE column to be Sysdate.)
How can i stop this from happening?
I have a form (StaffDetail) with three different blcoks. One of them is an Application Assignment block which consists of nothing but Assignment Type, Staff (Name), Last Updated By and Last Updated Date.. The Assignment Type and Staff has LOVs assigned to them individually.. Assignment type lets me pick all different types except for Project Manager. As soon as I select this option, i get the following error :
FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception...
This does not even let me select any other Assignment type, then i have to go close all sessions and come back into the same screen.
Also, this form was first created and tested on the development environment and later moved to QA environment. All selections work in the development environment.. I checked for the roles in QA for individual Users..
I have a form w/a tab canvas. BlkA is on Tab1 and Blk2 is on Tab2. In BlkA I have several items that have when-validate-item triggers. However, the trigger does not fire when I enter a value into item1 of BlkA followed by clicking on Tab2. To solve, I placed validate(form_scope) in the When-Tab-Page-Changed trigger. This works well with invoking the validation. However, focus remains on Tab2 (Blk2).
I would like focus to return to failed validation item in Blk1. I can capture the block name using :system.cursor_block in the Post-Block trigger of BlkA, assign that value to a form parameter and when a validation fails via the When-Tab-Page-Changed trigger I can return user back to BlkA(Tab1). However, I need direction on how to return user to the specific item in BlkA that failed validation
I have sort button that have the following code
go_block('TEL_OTHER_INFO');
set_block_property('TEL_OTHER_INFO',order_by,:system.cursor_item);
execute_query;
I have in the same form display item that its value will be sitting according to the post trigger of the previous text field when i press the sort button i get frm-40735 post-text-item unhandled exception Ora-01403 error.
I have a form which will call another and do some transactions and come back to original form and do other processes. save if successful. or roll back with error message.i m doing POST when i exit from the called form. and continue process in calling form. if any error, i m raising an error message with rollback.
But sometimes, it is getting committed with that error trn. especially in new database, first time try the scenario, it any error comes then getting commited.I m not able to find where the commit is happening? if any other sessions commit will affect this trn?
I have a piece of code which imports data from EXCEL to ORACLE forms.But after this I am getting the exception
FRM 40735:WHEN-BUTTON-PRESSED Trigger Raised unhandled Exception ORA - 305500
My Coding is below,
PROCEDURE PROC_IMPORT_EXCEL IS
--Cursor To Get The Number Of Columns Of the table
CURSOR c_get_table_columns IS
SELECT COUNT(ATC.TBLCLMNID) FROM APPLCTN_TABLE_COLUMN ATC
[code]...
Table A basically has 4 rows of interest, an outside event changes/inserts let's say row 1.
Row 2 and 3 have to be changed in a trigger depending on the new value of 1.(or not if the value stays the same)
Row 4 is the reference for the update and will not be changed.
My first simple AFTER INSERT or UPDATE trigger obviously failed because of the mutating table error.
I've a procedure and a trigger. The problem is when I call the proc from inside the trigger I get an error message saying that
Error: ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Unhandled error occured!
ORA-06512: at "ITEX.REFRESH_XSD", line 23
ORA-06512: at line 21
Here're these two problematic parts:
PROCEDURE:
create or replace
PROCEDURE Refresh_XSD(TableName IN varchar2)
IS
-- Variable declarations.
XML_Schema xmltype;
BEGIN
[code]....
So we have an xsd for a table only once. However that XSD needs to be refreshed when the table is altered, or created when the table is created. That's the reason I'm trying to use that trigger. If I comment out the procedure call from the trigger, everything works correctly except it does not do what needs to be done.
As far as I know only can't execute DDL statements from system triggers. But there's not a single DDL statement in there.
In the attached PRE-INSERT Trigger Code i need to do a validation. Validatation: If the Date range is between FEB 6 2013 and MARCH 1 2013 then the code should work ELSE It should throw a message
Check_Product_Title;
Begin
if :prod2.internet_product_flag = 'Y' and :prod2.brnd_code is null then
soft_messages('E',TRUE,'Brand code must be specified for CCH online product');
end if;
[Code]....
my purpose is when PRE-INSERT trigger fires validation should be done like date format , primary key in table if validation is ok then a value of text box should be set to sequence no . else it should generate message
View 9 Replies View Relatedwhy this query is not raising an error:
select memberid, mi.typeid, emailaddress
from memberdata@prod_db m
join memberitems@prod_db mi on m.memberid = mi.memberid;
These are the tables:
SQL> desc memberdata@prod_db
Name Null? Type
----------------------------------------- -------- ----------------------------
MEMBERID NUMBER
EMAILADDRESS VARCHAR2(50)
ADDRESS1 VARCHAR2(50)
SQL> desc memberitems
Name Null? Type
----------------------------------------- -------- ----------------------------
MEMBERID NUMBER
ITEMID NUMBER
Shouldn't we raise an 'ambiguous column' error on memberid?
I work with Developer 2000/Report Builder Oracle 8i...When I try to save a report in any format whether RTF or HTML it says:PDE-PER001 Internal error (REP3335: Unhandled Internal CA Error depep 2) ...Some reports can be saved,some not,especially those reports that have a PARAMETER FORM
View 3 Replies View Relatedhow can i write a trigger to insert the system clock time in the oracle form?
View 15 Replies View Related