I'm using an 'On-Update trigger' to replace the default Form Builder processing for updated records. When I try to change a column in the form I get: ORA- 01446: cannot select ROWID from, or sample, a view with DISTINCT, GROUP BY, etc.
The on-update doesn't fire. How do I get around this. The block is based on a view.
I am having a table with 4 columns as mentioned below
For a particular prod the value greater less than 5 should be rounded to 5 and value greater than 5 should be rounded to 10. And the rounded quantity should be adjusted with in a product starting with order by of rank with in a prod else leave it
Table1
Col1prodvalue1rank
1A21
2A62
3A53
4B61
5B32
6B73
7C41
8C22
9C13
10C74
Output
Col1prodvalue1rank
1A51
2A52
3A33
4B101
5B02
6B63
7C51
8C52
9C03
10C44
I have taken all the records in to a cursor. Once after rounding the request of 1st rank and adjusting the values of next rank is done. Trying to round the value for 2nd rank as done for 1st rank. Its not taking the recently updated value(i,e adjusted value in rounding of 1st rank).
This is because of using a cursor having a value which is of old value. Is there any way to handle such scenario's where cursor records gets dynamically updated when a table record is updated.
Application Express ver. 4.1
I have created a form. Some of the elements are hidden such as updated_by and update_date. I have provided the default values for these attributes as pl/sql expression in the "default section" (Application->page->edit page item). I am using the Process Row process that is automatically created when a form is created.
The problem is when I click the update button, the updated_by and update_date is passed as null values which throws an error from the database.
I've created a form that is working on the basis of Invoice Processing. There I want to get the sum of all the total of the products * quantity..I'm getting this error
FRM-30425: Summarized database item must reside in a block with Query All Records or Precompute Summaries set to Yes.
Item: TOTAL
Block: SBM_SALES_PRODUCTS
FRM-30085: Unable to adjust form for output.
i have problem when use trunc function in form builder i have two cloumn first column inserted data is 15.55 and i want the secound cloumn the will be too 15.55
i used this code but nothing happened
select sum(trunc(item_name,2)
into column2
from table_name
always the result be 16 i want it 15.55 without any round to this value
I used Report Builder 9.0.4.0.33, and i want to call 1 report name is "DOCK_RECEIPT.rdf" from Form when click into button name is "Print". I write code in When-button-press follow: This is code call report from Form.
Declare
pl_id paramlist;
Begin
pl_id := get_parameter_list('tmpdata');
[code]....
On report "DOCK_RECEIPT" has parameter same parameter on Form. But when i click button "Print" then can't call report,while form and report that together folder.Now, i want to question, how must configure report builder for call report from form that? example: about directories,path, etc
I have created a form based on a table and I want to override the processing which inserts/updates the data in the database. I have figured out how to create a new process but I am having trouble referencing the form field data.
If I have a filed call P40_USERNAME how do I reference this in the insert/update statement in the custom process.
I am using Forms / Reports Developer Version 6. When I run the report through form the Report runs but updated file was not executed. The path from which I run report through form contains updated report name. When I run report by using Report runtime shortcut then updated report will run. The report path mention in form using run_product also contains the updated file but didn't execute the updated file.
View 1 Replies View Relatedi want to create a form like a console with form builder 6i for databases monitoring. I have to connect to more than 10 databases and monitoring them at same time.
My question is, how can i create connection string for each one in form builder? after connect to per database i want to select some quires, for example
:
"select STATUS from v$instance;"
Attention: i don't want use db-link
I would like to create a browser button which enables to browse a tree directory and to select a file. how can i do it?
View 1 Replies View RelatedHow i can to built form (oracle 6i) that connect with report builder ?
View 2 Replies View RelatedWe are using Oracle Applications hosed on UNIX servers. There is a custom form in XXX_TOP/forms/US folder that I need to modify.
My Windows desktop has Forms Builder 10g installed. I ft pied fmb file over from UNIX server to my Windows desktop and tried opening it. I get an error FRM-18108:
Failed to load the following objects: APPSTAND, etc etc.
Obviously I am not doing it right. What is the correct way of modifying a form file sitting on UNIX server, using Forms Builder installed on Windows desktop? Do I need to copy all dependent objects to Windows desktop along with fmb file?
How can "call one trigger of item in trigger of form"
View 5 Replies View Related I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
I am running one update statement which is running almost one hour still no response.
I would like to know either query is processing or hanging(suppose to finish the update within few minutes).
Is there any way or sql to find either the statement(my update query) is running or hanging.
I have the following code which allows me to disable the "f04" field if pThis is set to 'N'
<script type="text/javascript">
function hide_show_comments(pThis){
//get the curren row index on change
[Code].....
There is a xxxxx.sql file in the OS level which contains create or replace trigger script. I modified that file with the code below:
if(upper(USER)= 'U_USER') then
execute immediate 'alter session set current_schema=USER';
end if;
after that, I went to sqlplus
and logged in to U_USER like this
SQL>conn U_USER/U_USER;
connected.
SQL>@xxxxx
some numbers are getting generated if i press enter.
Then i press ctrl +c and get to sql prompt.
I issue
SQL>select SYS_CONTEXT('USERENV','CURRENT_SCHEMA') FROM DUAL;
I am getting the output as U_USER but I must get the output as USER and not as U_USER. Basically the trigger is not getting updated.
I have developed a new form.Something peculiar is happening for that form.Let me list down the scenario
1)In the data base for the particular table my form is using, there are 1600 records.When i do a Query on Count Hits in the forms,it gives the same number.
2)However when i open the form ,i do not get some of the records.I found that on opening the form and making an Execute Query only those records that i have added through forms exist.
3) However,when i try to add a new record and do an Execute query again,i get all the records present in the database.
I need to fire the KEY-DUPREC trigger as I click on the key combination Shift+P therefore; I added the following line of code in the frmweb.res file.
80 : 1 : "Shift+P" : 64 : "Duplicate Record"
It worked iff no error was raised. So, if I have a raise form trigger failure in the KEY-DUPREC trigger, a capital P will appear in the text field that called the trigger.
I have a problem in my form. In my form there are 4 blocks and in one of the block i have a button. In which i put a code same as below:
BEGIN
IF NAME_IN('SYSTEM.FORM_STATUS') = 'CHANGED'
THEN
CLEAR_FORM(NO_VALIDATE);
END IF;
PROCEDURE ABC;
END;
So as per code i want to clear all the changes in form for current session and want to call the procedure ABC after that. But it is not calling the procedure ABC. And what would i do to perform the same?
My requirement, if there is no record in emp table when validate the EMP_NO_CHK text field, i need to set the focus on that field (EMP_NO_CHK) itself. But while execute the following code, I got error.chieve the task.
--EMP_NO_CHK_WHEN_VALIDATE_ITEM Trigger
-----------------------------------
Declare
cursor c is Select * from emp where Emp_no = :header.empno;
c1 emp%rowtype;
n NUMBER;
[code]...
I Have a table with 100records.after sometime i updated some records . But after that i want to know how many (count of) records got updated
View 3 Replies View RelatedI make button in detail section using this location button call another forms, I want first update the location entry then save our main forms.
View 3 Replies View Relatedwant to display records of two tables in in one form.I have 2 tables. tab1 and tab2
columns in tab1 are code, desc, part, onhand_qty AND
columns in tab2 are code, room_no, row_no, rack, shelf, qty, remarks.
Common column in both the tables is code.
i want to display all the columns of both the tables where tab1.code=tab2.code ,and tab1.onhand_qty is not equal to SUM of tab2.qty
I wanted to know the latest salary(last 2 updated records ) getting by emp- id 252 based on below mentioned information
source desti sal emp id MGR
1-Jan 1-Feb 1000 252 venkat
2-Jan 2-Feb 4000 252 venkat
2-Feb 2-Feb 5000 252 venkat
In my Application I have a tabular form and they other I edited 1 row & 1 entry and clicked on the update button. The message on the top says:
16 rows updated, 0 rows inserted (the standard message).
I do not have any page processes before or after applyMRU and its one of those freaky one-off issue that I can't reproduce again. Update 1 row and shows 15 updates.
Here are some info regarding my tabular form:
8 columns, pagination enabled for 20+ rows, no insert or delete functionailty, just updates.
I have a multi record block based on a view. All records in the view are displayed in the block by use of Post-Query trigger when entering the form.
The block has 5 items as follows:
1) RECORD_STATUS = a non-base table column which is a checkbox.
2) ITEM_TYPE = a text-item which has an LOV attached.
3) ITEM_TEXT = a text-item which is free format text.
4) LAST_UPDATE_DATE a date column
5) STATUS = a text item either 'Open' or 'Closed'
The LOV is based on a table of Item Types with values say, 'Type1', upto 'Type9'.
I have a Wnen-New-Record-Instance trigger which 'Posts' changes to the database. This has been included as i want to limit the values of the ITEM_TYPE column to values which have not been previously used.
Consider this scenario...
The block has 3 records.
record 1 has 'Closed' status so no updates are allowed.
record 2 has 'Open' status so updating of Item_Text is allowed.
record 3 has 'Open' status so updating of Item_Text is allowed.
I check the RECORD_STATUS checkbox on record2.
(This sets the RECORD_STATUS checkbox to a checked value and changes the STATUS column to 'Closed' by When-Checkbox-Changed trigger.) At this point the record has not been saved so if you uncheck the checkbox , then the STATUS column will go back to 'Open'. However at this point i will leave it as Checked (Closed).
I then insert a new record, only values Item4 to Item 9 are correctly shown in the LOV. I select Item4.
I then go back to the previous record and uncheck the Checkbox to say that i wish to leave it 'Open' after all (in effect no changes have occurred), then the STATUS column correctly reverts back to 'Open' by my WCC trigger. If i then SAVE the changes, the new record has been inserted on the database correctly, however the LAST_UPDATED_DATE from the record which was checked and then unchecked has also been updated incorrectly even though no net changes have actually occurred.
(because i am using WNRI trigger to limit the List of Values on the LOV column, this has incorrectly set the previous records LAST_UPDATED_DATE column to be Sysdate.)
How can i stop this from happening?
I am developing form, but there is issue when I Press F11 to query data.I make trigger form when-new-record-instance to assign values for item.But when i Press F11 then Block no clear.
View 1 Replies View RelatedI have a simple tabular form based on a four element table: the primary key (seq #), title, Updated_by, Updated_timestamp.I would like to populate the updated_by and Updated_timestamp fields when a user either updates or adds to the table.On other forms, I use a calculation to update the page_ item in the page_processing section of APEX. However, in the tabular form, I am not sure where I might update these two fields.
View 2 Replies View RelatedI have make a new trigger.Create a trigger that inserting a new job_id MAX_SALARY assigned as the employee's salary more than 80 departmental charges
I have that code, is that correct?
CREATE OR REPLACE
TRIGGER TR27
AFTER INSERT ON JOBS FOR EACH ROW
BEGIN
(SELECT MAX(SALARY) FROM EMPLOYEES WHERE DEPARMENT_ID=80);
:NEW.MAX_SALARY := :OLD.MAX_SALARY;
END;
What I need to complete it?