Networking And Gateways :: Using A Trigger In OID And Updating EBS Table?
Apr 27, 2011
EBS version is 12.1.3. we need to update the e-mail address in per_all_people_f in Oracle EBS based on a trigger that will fire against a column in Oracle Internet Directory (OID). A trigger will be built against table ct_mail, column attrvalue. When a value is inserted or updated this value will use an api on the EBS database to update per_all_people_f.
Q => Is ct_mail the correct table to use in OID for email addresses? or can you confirm a different table?
Q => If Ok to use ct_mail as the table can you see any problems with using a trigger in OID?
Q => Finally is a database link between OID and EBS database the best way for the trigger to work?
Oracle 11.2 - The goal is to create a trigger on table and anytime an update, delete or insert is done on the table, write values to a second table. I have the trigger and it works except it is not loading my col1/PK values. I understand I need to do a new/old value. Col1 is my PK on Table that I want to load anytime there is an update/delete/insert on the table. How do I code the old/new variable?
My CREATE OR REPLACE TRIGGER TRIGGER_NAME AFTER INSERT OR UPDATE OR DELETE ON TABLE_NAME FOR EACH ROW DECLARE v_col1 TABLE_NAME.COLUMN%TYPE; BEGIN [code]...
I have created the following trigger whcich will track all the column changes and insert the row in log table. here i have some doubt while substituting the cursor value.
create or replace trigger historylog_trigger before update on log_dev_test for each row declare PRAGMA AUTONOMOUS_TRANSACTION; in_loamid number(10); in_col_name varchar2(10); in_old_val varchar2(100);
I have a table EMPLOYEE with columns employee_id and status. I have a requirement that when an employee status is getting changed, then even its linked employee's status also should be changed to the same status value. For this, I need to handle the updating of linked employee's status using a trigger.
Since we get mutating trigger issue when try to update the originating table, I am trying to go with the approach of "in place of a single AFTER row trigger that updates the original table, resulting in a mutating table error, you may be able to use two triggers. The first is an AFTER row trigger that updates a temporary table, and the second an AFTER statement trigger that updates the original table with the values from the temporary table".
But however I am still facing the same issue.
Test case:
CREATE TABLE EMPLOYEE ( EMPLOYEE_ID VARCHAR2(1), STATUS NUMBER(9) );
INSERT INTO EMPLOYEE VALUES ('A',1); INSERT INTO EMPLOYEE VALUES ('B',1); commit; [code]....
Also, any alternate options (rather than using 2 triggers with temp table).
Order OrderID Status OrderItems OrderID EAN Amount Store EAN Amount
now,I need trigger that will on updating table Order and changing status to "GoodsReceived" increase amounts in Store according to values in OrderItems.
create or replace trigger order_received_trigger before update on Order for each row begin if (:old.status=4 and :new.status=1) then /* select ean, sum(amount) from OrderItems where OrderID=:old.OrderID group by ean; */ end if; end;
but now i dont know how to apply that select on table Store.
I have two different tables having similar structure but data is coming from different source.finally i want to update the view so that the it should affect the base table.
create table emp1 as select empno,ename,job,deptno,sal from emp where deptno=10; create table emp2 as select empno,ename,job,deptno,sal from emp where deptno=20; create view emp_view as select * from emp1 union all select * from emp2; [code].......
(CONNECT_DATA = (SID = PLSExtProc) (PRESENTATION = RO) ) ) /*----------------------------------------------------*/ sqlnet.ora # This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT.
I have one production server with oracle 11g R2 DB. I have to change Server Hardware and thats why I have to install oracle 11g R2 DB on New hardware and test it. I had installed DB with software only option and copied the cold backup of production server. The hostname and ip address of both the servers are different. I had change the "db_domain" parameter into init.ora with the hostname.Now my question is that can the same db runs on the same network with different hosts. Change of "db_domain" parameter into the init.ora is enough or i have to follow some other procedure.
I installed Oracle Express on my Windows 2003 Enterprise server. And right off the bat I cannot connect to it via command line. I have googled and read many sites, but am still getting the same error, no matter what I do. I am newbie again (was a DBA in 1990...when I used to have the same error and fix it in seconds...not sure why this problem still lingers in Oracle) so most likely I am overlooking something. Below are my tnsnames.ora and liserner.ora files
# This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT.
My client get the error Ora-12514 when he tries to connect to the db.Well;
1) we restart the services: "OracleServiceOrcl" and listener but nothing changes 2) We restart the server and nothing changes 3) We checked the dump and he was done on March,26th. No db export yesterday. Is there any link with the clock change of this week-end (location of the server: France)? 4) The lsnrctl services listener command run successfully but it doesn't mention the instance ORCL.
I have an Access DB which I'm using to connect to an Oracle DB at work. There are several Oracle DB's that I can connect to using Access but this one I'm not able to connect to. I get the Oracle error ORA-25153 Temporary Table Space is empty.
I don't have the ability to make changes to the Oracle DB only to read and query.
When I run the below query, the session got the below errors exactly after 1 hour. I checked profile, resource limit, and sqlnet.expire_time. The SQLNET.EXPIRE_TIME value is 10. Except expire time there is time limit in profile and resource. I dont know how this session is losting connection exactly after 1 hour. What could be the issue here and what else need to check it?
14:34:09 SQL> << DELETE query >> ERROR: ORA-03114: not connected to ORACLE DELETE FROM amsoftinstall
I'd got this error, TNS-12542, address already in used on my multithreaded application.
After finding some documents about this error, it happen because other application used same port as my listener. But i'd assured that only my listener, but it didn't happen in the first running process, but after some processes (hundreds of processes).
I am facing a issue on DBCA Installation, when i tried from off-shore.
a. When Iam connecting a server using production / Model VPN , and try to start Installing DBCA Using X11-Forwarding of putty, b. DBCA installation Started but its tooo Slow, it takes more than 3Hrs (Started at 9AM and ends at 11.17AM) c. First time it fails and second time its went to success, Whereas when i take alog of server ping request - I am getting a frequent "Requested time out" due to network fluctuation.
So let me know is the network fluctuation affects the Installation through VPN, if So how to overcome and is any workaround on that ?
We're deploying a new product release however this build uses Oracle 11G. We want to perform a side by side install for testing purposes. These are low usage systems so installing another Oracle build will not hinder the system.
We intend to test for a couple of weeks and migrate data, then uninstall the 10G. I'm in the process of installing 11G now, the 10G is up and running. I don't want to impact the 10G install. I'm installing 11G in /home/oracle/oracle11G directory. I would like to use 1 Listener.ora file. I've broken down the install bellow.
10G SID "processing" Oracle home /home/oracle/oracle10g /mnt/Oracle/Oracle10GData /mnt/Oracle/OracleRedoLog
11G SID "processing11G" Oracle home /home/oracle/oracle11g /mnt/Oracle/Oracle11GData /mnt/Oracle/Oracle11GRedoLog
Do I need to specify the databasename for Processing2? Also the front end boxes (managers) are two different servers so Processingweb1 and processingweb2.
I get a "ORA-00922 missing or invalid option" after compiling the following trigger:
create or replace trigger aifer_transfer after insert on transfer for each row [code]......
I want the trigger to affect the transferring account (from_account) with minus the "amount" being transferred from it, and the account transferred to (to_account) with plus the "amount" being transferred to it. My tables looks as following:
TRANSFER ----------------------------------------- -------- ------------ ROWNR NOT NULL NUMBER(9) PNO NOT NULL VARCHAR2(11) FROM_ACCOUNTNO NOT NULL NUMBER(8) TO_ACCOUNTNO NOT NULL NUMBER(8) AMOUNT NUMBER(10,2) DATE NOT NULL DATE
ACCOUNT Null? Type ----------------------------------------- -------- ------------ ACCOUNTNO NOT NULL NUMBER(8) KTNR NOT NULL NUMBER(6) REGDATE NOT NULL DATE BALANCE NUMBER(10,2)
I want to connect ORACLE-11gR2 that is on linux with an MS sql server. DO i need to use some third party drivers like easy soft ? Can i configure the database gateway without any third party drivers ?
Secondly if my oracle is on linux, can i configure the gateway on a seperate windows machine(that will connect to linux oracle and ms sql server) as i have found the gateway installation setup only for windows version.
I would like to implement connect time fail over from my JDBC thin client. The client will try to first connect with dedicated connection mode, if the connection time crosses more than two seconds, then connection will be opened with shared mode. To implement this, I have put the following connection string in my JDBC URL. I am able to connect to database with this URL, however it seems fail over does not work. Is it because, my database listener is not configured with dynamic service registration. If I implement the dynamic service registration, is fail over going to work? Note, I want to fail over in the same database instance but with different listener.
Which parameters are required in init file for 'Dynamic Listener Registration'? (for default port/ protocol). I understand that Local_listener is required only if we are using not default protocol, port.
Also which cases we need listener.ora file? I understand we need it for 'Duplicate Database' using RMAN as well as for 'Data Guard'. what else will need it?
We had an escalation wherein one of team members accidentally deleted an LDAP entry for a database. We use Oracle Net Manager to add/delete the connect descriptor.
Are there any logs using which we can find out as to who deleted the entry.
1. I have two remote Windows machines with database on each. One is Win 2003 Server (machine A) and another one is Win XP (machine B)
2. I can ping from A to B.
3. I can ping from B to A.
4. I can tnsping from A to B.
5. I CAN'T tnsping from B to A.
6. Windows Firewall on both machines are off.
What could be possible reason for point# 5?
Scenario 2:Now, the second part:
1. I had an unwanted entry in tnsnames.ora on B which I removed.
2. Then I restarted the listener on B. Actually, I wanted to restart the one on A to check if that resolves issue mentioned in point# 5 above.
3. I tried tnsping from A to B but suprisingly it is also giving "operation timed out" error now. So now tnsping not working from either sides.
I didn't make any changes in listener.ora on B, just stopped it and started again. Only change made was removing unwanted entry in tnsnames.ora on B.
Why does that affected database connectivity from A to B which was working fine previously?
NOTE: The two machines are connected through VPN using LogMeIn Hamachi. Hamachi assigns it's own IP address to each machine. Machine A is Windows Server 2003 and B is Windows XP.
