I am having one table Where,different country names are stored. while viewing data, I have to make sure that if country name having "USA" can only view its data. How can i do at DB level without passing where clause. Is Virtual Database in this case?
I have tried to implement RLS policy of oracle.I have two Schema X1 & X1_DBA.
I have created the emp table in X1_DBA create table emp(empid number,ename varchar2(10),deptno number) and inserted some rows into the Table. i have created the below function in X1_DBA schema & Given Select Privilege to X1.
CREATE OR REPLACE FUNCTION no_dept10( p_schema IN VARCHAR2, p_object IN VARCHAR2) RETURN VARCHAR2
[code]...
When i Add the Policy in X1_DBA.schema i am getting the Error as Table does not exist
I would like to know that when the private network in oracle rac down, which is the preferable node in the cluster (cluster of 2 nodes) to takeover the cluster.
Can I set/get the failover policy to point to one node in the cluster?
We just got a new Dell R720 server that will host our Oracle DB. The server hasn't even been turned on yet but we know that the load on the server will be very low for a long time.
One of our problems is that we need to run a VERY important application. Since it is not very resource consuming compared to it's importance we chose to run it on a not so new Xeon 5110 1.60 GHz - 4GB RAM server. He said it's not a good idea and that we should buy a new server. (money is very low)
The software vendor suggested to virtualize our R720 server, host a vm running our database, and along with it other smaller machines like the one I described above. I suggested the use of Oracle VM, Oracle Linux for the database host and transforming the physical servers servers in VM with P2V.
Our IT Manager didn't like that, he said that it's not recommended to run a database on a virtual machine. But our software vendor said that many of their clients run their solution this way.
I am configuring two node RAC on oracle virtual box. Did its mandatory to configure DNS on both nodes before Rac installation? Whats the purpose of DNS in RAC. And if its mandatory did i have to configure DNS on each node separately?
I have a Host system of windows 8, installed the Virtual Box Latest edition.The guest OS is the oracle Linux that came with the Pre-Built Developer VMs from Oracle.The VM is set to HOST ONLY network setting. Now, the thing is that i want to access the Oracle in the guest machine from my windows host machine.the guest OS shows the IP address as 192.168.56.101. I can ping the IP address from the HOST machine, but cannot connect theSQL developer to the oracle in the guest OS from the host machine. It keeps on saying the Network adapter cannot connect. do not say that install the oracle in window itself. I actually want to do the same on my macbook pro as that is my primary machine.
Guest: Using Virtual PC on Win7, created a VM using XP-Mode. Installed Oracle and everything on it. I can connect to the Oracle from within the guest env using sqlplus. Listener is also running, checked with 'lsnrctl status"
Guest and Host can ping (network) each other. I installed the guest using the Microsoft Loopback Adapter. Disabled the firewall on the guest OS before the host ping could work.
So ping works both ways from guest to host and host to guest. tnsping from host fails says "no listener". When I did a "telnet 192.168.x.x 1521" from host it said could not open connection on port 1521.
How do you open port 1521 on the guest OS to traffic from the host OS?
I am having issue with IMPDP on ORACLE VIRTUAL COLUMNS.I am having following table with Virtual column defined with Not null. Expdp is fine without any issue.
DDL : ------ CREATE TABLE alert_hist ( alertky INTEGER NOT NULL, alertcreatedttm TIMESTAMP(6) DEFAULT systimestamp NOT NULL, alertcreatedt DATE GENERATED ALWAYS AS (To_date(Trunc("alertcreatedttm"))) VIRTUAL NOT NULL
When I do the import (IMPDP) it got failed with the following error.
. . imported "TESTSCHEMA"."VALART" 359.1 KB 4536 rows ORA-31693: Table data object "TESTSCHEMA"."ALERT_HIST" failed to load/unload and is being skipped due to error: ORA-39097: Data Pump job encountered unexpected error -1
After that I dropped the Virtual Not null column and recreated that column with Nullable.
DDL : ----- alter table alert_hist drop column alertcreatedt; alter table alert_hist add alertcreatedt DATE GENERATED ALWAYS AS (To_date(Trunc("alertcreatedttm"))) VIRTUAL;
After that I took the expdp and impdp , it went fine with out any issue.
In my Organization I am trying to install oracle ODTwithODAC112030 but one Error showing that is java virtual machine could not find main class program will Exit.
Server Configuration Dell power Edge r510 Windows 2003 64 bit serv PAck 2 Citrix Presentation server 4.5 .
I'm running Oracle 9i on AIX 5.2. I'm not using a recovery catalog, nor am I using media management software. I perform a full, online rman backup of the database and archived redo logs daily to disk, then use operating system commands to copy the backup to tape. There is only space on disk for two days' backups, so I need to have a retention policy of "redundancy = 1", and run a "delete obsolete" prior to the backup. The problem is that I don't want to subject the archived redo logs to this retention policy.
I have two physical standby databases connected by WAN to the primary site, and I might need archived redo logs that are a few days (or more) old in the event of a prolonged WAN outage. I've read about the "keep forever" option, but apparently it isn't available without using a recovery catalog. Is there any way to spare the archived redo logs from my retention policy?
Note: I want to "protect" the actual archived redo logs from the retention policy, not the backups of the archived redo logs.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.So surely the requesting backup is behind retention date and has been pushed to tape.
I'm on a Windows server 2003 R2 64 bit, database is 11.1.0.7. From RMAN connected to the target and the catalog, this is a show all;
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORCL are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS; CONFIGURE BACKUP OPTIMIZATION OFF; CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:oracleadmin
[code]....
I'm running incremental backups, a level 0 on sunday and a level 1 the other days of the week, this is the ctl file:
LEVEL 0: connect target /@ORCL connect catalog rman/rmanpw@rmancat RUN {
[code]....
The level 0 does delete the archive logs (because of the delete input). Each backupset has two copies of the archive logs (which is what I want), and I expected the logs to be deleted after being backed up 2 days (each day is twice, 2 days = 4 times). But it's not deleting the logs, even after 6 runs.
I have a DR setup with the following configuration
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS; CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default CONFIGURE MAXSETSIZE TO UNLIMITED; # default CONFIGURE ENCRYPTION FOR DATABASE OFF; # default CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY
I dont want to backup the STDBY DB but I want the ARC files to be removed when applied so my flash area does not fill up. Is there some command(rman or not) that can fire off this policy?
I want to create a private DBLINK in 10g and grant access to use this to limited (another 2/3) users. Is that possible ?I don't want to create PUBLIC DBLINK because the users to use it are limited.
I'm making a function A that does many calls to procedures in an other package B. To make this function more readable, I'd like to specify synonyms for the procedures in B. I only need the synonyms inside this function, I don't want to make database synonyms.
For example:
Function get_all_employees return clob is v_emp clob; begin
We have a 2-Node RAC11g R2.0.3 installed on Linux 5.5.
My problem to have a private connection disconnected on daily bases at 12:00 PM and 3:00 PM ONLY,and come back life within 2 minuets,I am using cross-over cable to connect those private interface , So in the ocssd.log Stating :-
2012-09-18 15:06:43.735: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 50% heartbeat fatal, removal in 14.340 seconds 2012-09-18 15:06:50.752: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 75% heartbeat fatal, removal in 7.330 seconds 2012-09-18 15:07:19.821: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 90% heartbeat fatal, removal in 2.480 seconds, seedhbimpd 1
