I am using the below code to capture all important logs when user failed to login on database , but i cant capture the username which are failing to connect on database.
CREATE OR REPLACE TRIGGER failed_logon_notifications AFTER SERVERERROR ON DATABASE
I have installed executable only (database option only) when i have installed oracle11 that time it is not asking any option for password. So is there any option to login in this type of condition?
When reviewing failed login attempts with this query:
SELECT username, os_username, userhost, terminal, to_char(timestamp,'dd-mon-rrrr hh:mi:ss') FROM sys.dba_audit_session WHERE returncode != 0 and trunc(timestamp) >= trunc(sysdate-1) ORDER BY 5
I find some records for a username that does not exist. In any of my databases. I presume that if an attempt to a nonexistent user was made, it would be rejected before it gets to the db. But then again, a bad password would also be rejected.
I need to design my login form to be able to connect to different database environment (Env1 and Env2).When the login form is loaded it is already connected to Env1, after the user enters his login details he has option to continue with Env1 or connect to Env2.I used the "Logout;" to disconnect from already connected Env1 and used "Logon(<username>,<pwd>@<Db instance>);" but i see that the form will connect to Env1 irrespective of what environment credentials i provide in Logon. how i can disconnect from Env1 and connect to Env2. Is this possible?
I have a problem to login on my database 11.1.0.7 on linux 64. It were migrated from 9.2.0.4 and everything was fine but now I am not able to connect to database.
Only one way when I can connect is when the database is started in RESTRICTED mode and I cold login under sys (sysdba).
But when i leave this mode, nobody can connect . sqlplus is freeze and I have to kill that session. What could be a reason? Any parameters? It's strange for me because It was working..
I am trying to understand how to enable some audit so we can capture OEM logins as well.
Here is my setup. Lets say my DB that i am auditing is called audit_db (audit trail set to DB) sitting on host called host_db. and we have grid control agent on this box.now my grid control is as this. Lets say my OMS and repository is on host called OMS_host.
we run query aginst dba_audit_session to get info as to who tried failed login attemps and stuff.
Now to the part that is not working.
-- this is the good part When i intentionaly login to the audit_db with sqlplus client from my laptop with wrong username/password that is captured. we get the username,os_username,userhost,terminal.
here is the sample output
username is the wrong user that i tried to login as os_username is the my local username(ad account) userhost is my_laptop_name terminal is laptop_name
from above we can figure who was trying to login(failed).
-- this is the bad part But lets say i try to login to audit_db through grid control and use wrong username/password.that gets captured too(but not all of it). we get the username,os_username,userhost,terminal.
here is the sample output
username is the wrong user that i tried to login as os_username is the user of OMS repository db(oracle) userhost is oms_host terminal is unknown
Now with the above info, we cannot figure out who tried to login with bad login credential.
I am new in oracle I have installed Oracle in work group, while i work group it is working fine. But latter I have change the server from work group to domain. At that time Oracle was not working , not able to connect.
After that I change the Domain to work group again. And same problem exist. But I found that lsnrctl is working fine. But OracleServiceXXX is not able to startup in services.msc
I have installed Oracle in workgroup, while i workgroup it is working fine. But latter I have change the server from workgroup to domain. At that time Oracle was not working , not able to connect. After that I change the Domain to workgroup again. And same problem exist. But I found that lsnrctl is working fine. But OracleServiceXXX is not able to startup in services.msc
I am using Oracle forms 6i. I want to create an application that does not require any connection with Oracle database. My Application fetch all its data from an Excel file. I do not want Login with Database,so i want to bypass it. How can i do it ?
I instaledl Oracle Database 11g in my PC and try to login to it. I am able to log to it via SQLDeveloper but I can not login via SQLPLUS and I got ORA-12154. Here is my TNSname.ora and SQLplus.ora
# sqlnet.ora Network Configuration File: C:appmhakimjavadiproduct11.2.0dbhome_1 etworkadminsqlnet.ora # Generated by Oracle configuration tools. # This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native
can we query this without login to the oracle database from linux os?database is up and running . /apps/oracle/product/11.2.0/dbhome/bin/sqlplus system/passwd select name from v$database;
I need to login remote DB writing a shell script where our DB is on a separate node, i have to test the script only with
SCHEMA USERNAME PASSWORD HOSTNAME PORT NO SID/SERVICE NAME
these details. May be am wrong to ask this question but i need to login and check the requirement. Is there any other anyway to login without sqlplus utility?
Running a Dell x86_64 machine using CentOS 6.4 Install using the command: rpm -ivh oracle-xe-11.2.0-1.0.x86_64.rpmOracle XE installs without any errors.
However: When during database configuration we get the Database Configuration failed error The logs all show similar errors, here's a snippet: Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 BEGIN dbms_backup_restore.zerodbid(0); END; *ERROR at line
1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 ORA-01034: ORACLE not availableORA-27101: shared memory realm does not existLinux-x86_64 Error: 2: No such file or directoryORA-00119: invalid specification for system parameter LOCAL_LISTENERORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=1q6xlf1.bcohome.bco.com)(PORT=1521))'Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter system enable restricted session*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter database "XE" open resetlogs*ERROR at line 1:ORA-01034: ORACLE not available
I want to change database login in report at runtime.
For Example. I have created and run a menu by using database login "ABC/xxx" and want to run a report through this menu directly (Without using form) by different data base login i.e "xyz/ddd".
what is the sol. except passing user id at report call i.e rwrun60 parameter.
I am unable to login to my database. I get an error that says "Io exception: the network adapter could not establish the connection" "vendor code 17002".
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 and Oracle Discoverer 9i desktop & Administrator,We have configured a physical standby database. We have ask users to connect to standby thru discoverer thru a different tns entry, but user can also connect on primary db.
We want to restrict the specified users to connect on primary database thru discoverer.
3 recover database using backup controlfile;//in this step generate error msg "database not mounted"
4 alter database open// this is also happend above error
ORA-01122: database file 1 failed verification check ORA-01110: data file 1: '/u01/app/oracle/oradata/DB11G/system01.dbf' ORA-01207: file is more recent than control file - old control file
I issued a SHUTDOWN IMMEDIATE command on my database and for over 2 hours and got no response. I did this because I wanted to restart the database due to many hanging sessions which had led to high CPU usage on the server by oracle process.
Oracle Service<dbname> instance using the Windows Services screen which failed with an error 1053 message. At the same time I got an ORA-01013 message saying user requested cancel of operation. See below:
SQL> SHUTDOWN IMMEDIATE ORA-01013: user requested cancel of current operation SQL> SHUTDOWN IMMEDIATE ORA-01089: immediate shutdown in progress - no operations are permitted SQL> SHUTDOWN ABORT ORA-24324: service handle not initialized ORA-01041: internal error. hostdef extension doesn't exist
What I want to know is how do I proceed? Also how do I check to see the status of the Shutdown operation?
When we upgraded the database from 10g to 11g, Apex upgrade failed. Due to the failure, I removed the old schema and did a fresh install of Apex 4.1. It is working but we lost the applications from previous Apex.
What is the best strategy when you need both database and Apex upgrades? We are a Linux workshop, setting up Apex in Oracle Fusion Middleware 11g environment.
In fact I have around 50 excelbooks that are connect with oracle via ODBC/or any other way. My task is to build the login screen on form 10g. This form will validate the user via .dll after successfully validation, Form will connect to specific oracle user. This Login Screen will call the new form that will execute the query for the list of excel sheet [table that will keep the name, description and path of the excelbook]. User will select the one excelbook to open. As user will select Excelbook should be open. Now this excel book should be connected with specific oracle user.
Question 1: How to open the excelbook, that excelbook should be connected via form 10g login screen. After connection excel has its own micros to run he query from oracle database.
Question 2: How I can create the mirco into form 10g to run into excelbook/excelsheet.
Question 3: How I can pass the query or function/procedure to the excelbook/excelsheet.
I am having a application which is on Widows NT Operating system.I am using Oracle 10g Database, Developer suite 10g And 10g Application server.
My application uses Run_report_object to generate reports.Run_Report_Object is called in forms and Report server is configured in the same Application server where FMX are placed.
The report generation was working fine as long as oracle default login was used. When i created a form to handle login on my own, Report server is throwing "Unable to connect to database" error. My login forms takes the parameters from user and calls default logon command in on_Logon trigger.
