I have table 'A' with column 'ID','NAME','IN_DATE','PHONE','EMAIL'
Now I have to create a trigger such that on every insert in the table 'A' the value of column 'IN_DATE' changes to sysdate.I m not good in PL/SQL
I just want to know whether can i create a trigger where the sysdate can be automatically written into a table? for ex: if to_char(sysdate,'HH24:MI:SS') = 18:00:00 then it should be written in a table..?? is there anyother way instead of triggers??
View 8 Replies View Relatedi want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end
BEFORE INSERT OR UPDATE OF issued ON shares_amount
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO shares_amount(date_end) VALUES(SYSDATE);
END set_date_end;
/
I have make a new trigger.Create a trigger that inserting a new job_id MAX_SALARY assigned as the employee's salary more than 80 departmental charges
I have that code, is that correct?
CREATE OR REPLACE
TRIGGER TR27
AFTER INSERT ON JOBS FOR EACH ROW
BEGIN
(SELECT MAX(SALARY) FROM EMPLOYEES WHERE DEPARMENT_ID=80);
:NEW.MAX_SALARY := :OLD.MAX_SALARY;
END;
What I need to complete it?
create or replace trigger aifer_transfer after insert on transfer for each new row begin
UPDATE Account SET balance = balance-:new.amount WHERE acc_id = from_acc_id; UPDATE Account SET balance = balance+:new.amount WHERE acc_id = to_acc_id; end if; end; create or replace trigger bifer_transfer before insert on transfer for each new row begin if get_balance(:new.from_acc_id) < :new.amount then raise_application_error(-20001, 'Not enough money in account!'); end if; end; create or replace function get_balance(p_acc_id in number) return number as v_balance account.balance%type; begin select balance into v_balance from account where acc_id = p_acc_id; return v_balance; end; select get_balance(123) from dual..................................................i am geting this error when executing the trigger..................................................Error report:ORA-01912: ROW keyword expected01912. 00000 - "ROW keyword expected"*Cause: keyword missing*Action:
writing a trigger body. My requirement is i need to insert a new record in a task table when ever a new record is inserted into employee table.Here in the trigger i need to select the name of the employee in the last inserted row in employee table and insert the name in task table.I tried to write the code as below
insert into task(name, date, type) values ((select name from employee where emp_id=(select max(emp_id) from employee), sysdate, 'document'));
When i am trying to insert record using trigger, it is taking last but one record from the employee table.
Select * from Table A where emp=1;
Emp AID
1 111
select * from Table B where emp=1 ;
----------
AID, emp, start_dt, End_dt
111 1 01-jan-2011 31-dec-2011
112 1 01-jan-2011 31-dec-2011
113 1 01-jan-2011 31-dec-2011
I have After insert or update trigger on Table B. This will update AID column on Table B.
after insert update on table B
update A
set AID=:new.AID where emp=:new.emp;
if i end date any record on table B i wanted to update max(AID) on Table A.
EX update table b
set end_dt= sysdate-1
where aid=111;
So I wrote the trigger on Table A as below
before insert or update on trigger A
declare
v_aid number;
v_strt_dt date;
v_end_dt date;
begin
select max(AID) from table B
where emp=:new.emp;
select v_end_dt from table B where aid=:new.Aid;
if v_end_dt<sysdate then
:new.aid:=v_AID;
end if;
But the problem here is its giving mutating error.Then i tried with autonomus transaction but it willreturn old value when it fiers.
So how can i achive both the task at a time.That means i have to endate Table A , Same time i have to update active max(AID) to table B.
I am calling an after insert Trigger on table1.
In the trigger I am calling a procedure that returns an error if there is any error returned from procedure. I have to update the table table1's column error_desc (for the same new inserted record for which the trigger was called) with the error received by OUT parameter of procedure called in trigger. I have to update the same record on whose insert this trigger was called.
I have three tables.
One for projects, one for volunteers, and a bridge entity for the many to many relationship between the Project and Volunteer.
In Project table, I have a field called, Volunteers_currently_signed_up, which means the number of volunteers currently signed up to participate in a project.
When I add an entry to my bridge entity which is composed of Volunteer_ID and Project_ID, I want the Volunteers_currently_signed_up to increment by 1, where the Project_ID in the bridge entity corresponds to that in Project.
I have very very little PL/SQL, and this is my amateur attempt so far:
CREATE OR REPLACE trigger "BI_Volunteers_currently_signed_up"
BEFORE INSERT OR UPDATE ON Volunteers_in_project
for each row
WHERE Volunteers_in_project.Project_ID=Project.Project_ID;
begin
Project.Volunteers_currently_signed_up += 1;
end;
/
write a trigger that achieves the above
We would like to create functions to insert and update our tables and would like to make it not possible to update and insert the table directly outside of the function. Is there a way to do that in the trigger?
View 1 Replies View RelatedI Created One Trigger as Follows
CREATE OR REPLACE TRIGGER TRIGGER1
BEFORE INSERT
ON table1
FOR EACH ROW
[code]......
Here , I Want To Insert The Data From My User To Test User . In This Situation When I Execute The Above Trigger It Shows The Error PL/SQL: ORA-00942: table or view does not exist
I have table t1 and t1 , I want a procedure that will insert all records from t1 into table t2 and after successfull insert table t1 should be truncated .
If their is any problem in insert in to table t2 , the truncate command should not work .
Truncate command should work only after successfully insert command .
In a trigger(on update of a table t1) I am trying to write, I am doing an insert on t2 accessing ':new' values of the update on t1.
But in my Insert statement, I am having get one of the column values from another table. How can I write my insert statement in such a way as to insert values contained in ':new' pseudo columns and a select from another table. Below is my insert statement in the trigger :
-------
IF (:old.GROUP_YELLOW <> :new.GROUP_YELLOW) THEN
INSERT INTO TEST.W_THRESHOLD_LOG
(THRESHOLD_LOG_WID, CHANGE_DATE, MEASURE_TYPE_WID, MEASURE_NAME, CUSTOMER_WID, CUSTOMER_NAME, USER_ID, CHANGED_ITEM, PREV_VALUE, NEW_VALUE)
VALUES(TEST.W_THRESHOLD_LOG_SEQ.NEXTVAL, SYSDATE, :new.MEASURE_TYPE_WID, 'Rolling Stabilty' , :new.CUSTOMER_WID, 'Customer1', 'User1', 'GROUP_YELLOW', :old.GROUP_YELLOW , :new.GROUP_YELLOW);
END IF;
-------
In the above code if the hardcoded value 'Customer1' need to be picked from another table,
i.e .
SELECT NAME FROM W_CUSTOMER_DIM WHERE CUSTOMER_WID = THRESHOLD.CUSTOMER_WID
how can I rewrite my query to the above value from the select into my insert statement..?
how can i create this query on a procedure:
Insert into COMPUSOFT.PESAJE@DB_2
(PSJ_GESTION, PSJ_COD, PSJ_PLACA, PSJ_PESO, PSJ_FECHA,
PSJ_ESTADO, BLZ_COD, MNF_COD, DMN_COD,
USR_COD, PSJ_OPERACION, TIC_COD, PSJ_TARA, PSJ_NETO)
select /*+ FULL(Tbl1) */
[code]..
plus i would like to insert also that when it runs the query also change a value in table pesaje column dmn_cod to "yes" default "no" in db_2
I know this is an old thread and I just started working with triggers. I want to check if the data being inserted is already in the table and if not insert it:
create or replace trigger t_triggername
before insert on tbl_tablename
for each row
begin
if(:new.user_id <> :old.user_id) then
insert into tbl_tablename(user_id, location)
values (:new.user_id, :new.location);
end if;
end;
what if I wanted to keep the user but only update location if the user is already in the table. I've tried doing it this way:
create or replace trigger t_triggername
before insert on tbl_tablename
for each row
begin
if(:new.user_id <> :old.user_id) then
insert into tbl_tablename(user_id, location)
[code]...
Table A basically has 4 rows of interest, an outside event changes/inserts let's say row 1.
Row 2 and 3 have to be changed in a trigger depending on the new value of 1.(or not if the value stays the same)
Row 4 is the reference for the update and will not be changed.
My first simple AFTER INSERT or UPDATE trigger obviously failed because of the mutating table error.
SQL> ALTER SESSION SET CURRENT_SCHEMA = CLA_T3;
Session altered.
SQL> select sys_context('USERENV','SESSION_USER') current_user,
2 sys_context('USERENV','SESSION_SCHEMA') current_schema
3 from dual
4 ;
CURRENT_USER
--------------------------------------------------------------------------------
CURRENT_SCHEMA
--------------------------------------------------------------------------------
CSR_ETL
CLA_T3
SQL> set linesize 300;
SQL> /
CURRENT_USER
----------------------------------------------------------------------------------------------------
CURRENT_SCHEMA
----------------------------------------------------------------------------------------------------
CSR_ETL
CLA_T3
SQL> create table cla_t3.test (r number, b char(2));
create table cla_t3.test (r number, b char(2))
*
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> create table test (r number, b char(2));
create table test (r number, b char(2))
*
ERROR at line 1:
ORA-01031: insufficient privileges
After Setting current schema to 'CLA_T3', I am unable to create table in cla_t3 schema.
Is it possible to create table using trigger?
I tried but failed...
CREATE OR REPLACE TRIGGER tri1
AFTER UPDATE
ON dept
FOR EACH ROW
declare
pragma AUTONOMOUS_TRANSACTION;
BEGIN
execute immediate 'create table dept_dum as select * from dept';
END;
/
SQL> update dept set deptno=23 where deptno=10;
update dept set deptno=23 where deptno=10
*
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "SCOTT.TRI1", line 6
ORA-04088: error during execution of trigger 'SCOTT.TRI1'
I am running this as scott user
My requirement is to
create table as select * from table_name where flag=1
This has to be done parallel for all the tables for which this flag is enabled and by that trigger delete all those rows which were backed up as table.
I'm working on a project and I can't figure out the procedure I will need to use. I've got a sysdate field in my "Calls" table which generates a call date + time, however I need to insert a severity level of the call after a certain amount of time, e.g. after 1 hour level turns from level 4 to level 3 and so forth until reaching level 1 after x amount of time. I know I'd need to put in an else if statement within this procedure I just can't work out how to do it with the sysdate field that has also been created.
A bit of info about the table, table name = calls, column 1 = date_time and column 2 is called severity_level
i have created a trigger on a table after update. i am using if condition if the condition is true i am passing a value and then inserting into audit table.
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
Then i am inserting
Insert into audit_table(change_type.....)
values(..L_change_type)...)
If i want to skip the insert statement for particular condition wt i have to do.
table
CREATE TABLE "TEST"
("CONTRACT_REF_NO" VARCHAR2(20 BYTE) primary key,
"CHG_GL" VARCHAR2(9 BYTE),
"CHG_GL_1" VARCHAR2(9 BYTE),
"CHG_GL_2" VARCHAR2(9 BYTE),
[code]...
10 rows selected.
create or replace view test_view
as
select 1 id,CONTRACT_REF_NO,chg_gl
from test
union all
[code]...
11 rows selected.
I have done only for one id.
so the problem is the front end is showing this test_view that people will modify.but they have to actually modify the table ,so I can think of an instead of trigger(instead of insert and instead of update ones).
I gave this a shot on my own, and failed, so I am putting the question to you:
I am looking to create a trigger on the "Account" table
CREATE TABLE Account(Acct_no number, BillAmt number, OpenDate Date, SSN number,
Primary Key (Acct_no),
Foreign Key(SSN) references ResponsibleParty(SSN));
which will update the BillAmt field whenever one of the account's respective records is inserted/updated/deleted from the following tables:
CREATE TABLE Plan(Plan_id number, Cost number, Minutes number,
primary key(Plan_id));
CREATE TABLE Feature(Feature_id number, Description varchar(20), Cost number,
primary key(Feature_id));
These tables are linked through the following table:
CREATE TABLE Phone_Line(MTN number, cStart Date, cEnd Date,
rDate Date, Status char, ESN number, Acct_no number, Plan_id number,
primary key(MTN),
foreign key(ESN) references Equiptment(ESN), foreign key( Acct_no) references Account(Acct_no),
foreign key(Plan_id) references Plan(Plan_id));
create trigger on certain column for table structure.
SQL> desc MXMS_BF_TXN_DTL_T
Name Null? Type
----------------------------------------- -------- ----------------------------
DOC_NO NOT NULL VARCHAR2(200)
SEQ_NO NOT NULL NUMBER(24)
GL_CODE VARCHAR2(200)
TXN_NATURE VARCHAR2(200)
TXN_TYPE_CODE VARCHAR2(200)
[code].....
I need to collect new and old data whenever update statement fire on DOC_NO,POLICY_KEY,CRT_USER column.i have created only audit table for the above as below structure .
Name Null? Type
----------------------------------------- -------- ----------------------------
TIMESTAMP DATE
WHO VARCHAR2(30)
CNAME VARCHAR2(30)
OLD VARCHAR2(2000)
NEW VARCHAR2(2000)
Description:- TIMESTAMP is for when the modification happen.
WHO is for username
CNAME is for column which is modified
OLD is for old value for the modified column
New os for new value for the modified column
i have two table:
QUOTE create table test1(
num number(4),
name varchar2(50));
create table test2(
num1 number(4),
name1 varchar2(50));
then i want to create a trigger before update on table test1 that i want to insert in table test2 the old values in table test1:
for example
QUOTE insert into test1(1,'cocol');
QUOTE update test1
set name='oracle' where num=1;
so i want the trigger to insert 1 and cocol into the table test2.
Using oracle 11.2.0.3 and wish to do the following.
Have trigger on table a on database a.
When a record is inserted into table a a record should be written first to table1 on database b , committed then a record written to table2 on database b as table2 has fk dependency on table 1.
How can we best achieve this.
Getting problems with the commit inside the trigger have tried pragma autonous transaction as well.
Get ora-02064 distributed transaction not supported when use the following code
create or replace trigger por_TRG_POP_IKNOW_MULTIPLE2
after INSERT OR UPDATE or delete on por_MULTIPLE
for each row
-- tO ENSURE I-KNOW KEPT UP-TO-DATE WITH HOMIS MULTIPLE
-- delib not delet form i-know as if has been used by customer cannot delete
-- due to referential inetgrity constraints in i-know
-- Note parent_num updated on IKW via support.maintain_latest_dim_version.update_multiple until
-- When IKW becomes master of multiple info, this trigger can be removed
-- and support.maintain_latest_dim_version.update_multiple removed
declare
PRAGMA AUTONOMOUS_TRANSACTION;
v_dml_type varchar2(1);
begin
IF INSERTING OR UPDATING
[Code]....
--when matched THEN update set
-- a.MGRP_NUM b.mult_link_multiple_num,
-- MGRP_DESCRIPTION = (select mult_name from por_multiple
-- where mult_code = mult_link_multiple_code
when not matched
then insert
(
a.MGRP_NUM,
a.MGRP_DESCRIPTION
)
[Code]...
Is it possible in oracle dbms for a user to have the permission to create a table but not have the permission to insert in, although the same user just created it?
View 6 Replies View RelatedI'm trying to create a trigger so that whenever a record in the Employee table is deleted, a trigger will automatically delete corresponding records in the Job History table, then the Employee record is archived to EmployeeArchive before it is deleted. It compiles but with warnings. Here's what I've got.
CREATE TABLE EmployeeArchive
(EmployeeID Int, FirstName Char, LastName Char,
EMail Char, PhoneNumber Int, HireDate Date, JobID Char, Salary Int,
Commission Int, ManagerID Int, DepartmentID Char);
[Code]....
I would like to create a trigger on a table which populates a log table. In addition to using the table where the trigger will exist, I would like to populate a couple more fields in the log table with with data from 2 other tables.
e.g.
NAME_TABLE
-reg_id
-name
ADDRESS_TABLE *trigger to be fired when a new record is created here.
-reg_id
-srv_id
PROCESS_TABLE
-srv_id
-start_time
-end_time
This is what I would like the logging table to look like:
LOGGING_TABLE
-address_table_reg_id
-address_table.srv_id
-name_table.name
-process_table.start_time
-process_table.end_time
How can I go about creating this type of trigger?
create table test123 as (unit varchar2(5),qty varchar2(25));
insert into test123('ABC','10,40,50');
insert into test123('PQR','20,30,40,10');
insert into test123('XYZ','20,10,70');
I have a table called test123 which qty field. if the sum of qty is entered more than 100 or less than 100, it should throw error.
I wrote this trigger..but it is not working.
create or replace restrict_sum
after insert or update of qty on test123
for each row
declare
v_sum number;
[code].........
I have a table with columns job_id, jan, feb, mar ... , and year
I need to create a select query that will get the data from 18 months ago based on sysdate.
So something like:
Select to_char(add_months(sysdate, -18),'MON') from table1 where job_id = 56947 and year = to_char(add_months(sysdate, -18),'YYYY');
However I need the result of to_char(add_months(sysdate, -18),'MON') to actually act as a column name, not a string result.