SQL & PL/SQL :: Create Trigger On Table After Update?
Apr 16, 2013
i have created a trigger on a table after update. i am using if condition if the condition is true i am passing a value and then inserting into audit table.
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
Then i am inserting
Insert into audit_table(change_type.....)
values(..L_change_type)...)
If i want to skip the insert statement for particular condition wt i have to do.
i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end BEFORE INSERT OR UPDATE OF issued ON shares_amount FOR EACH ROW DECLARE BEGIN INSERT INTO shares_amount(date_end) VALUES(SYSDATE); END set_date_end; /
I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
i am trying to create a update trigger that allows any quantity reduction of 5 units and if the reduction is more than 5 units it blocks it and just reduces it by 5.here are two scenarios
SQL Update statement where the new Quantity value being smaller than 5 is allowed by the trigger.
-- old qty 20 update purchase_order set quantity = 18 where po_no = 'PO11'; -- new qty 18
SQL Update statement where the new Quantity value being larger than 5 is only reduced by 5 by the trigger.
--old qty 25 update purchase_order set quantity = 19 where po_no = 'PO15'; -- new qty 20
i just have the basic trigger code, but i think it is the math that i am not getting (i was never good at math)
create or replace trigger purchase_quantity_updt before update of quantity on purchase_order for each row when (new.quantity < old.quantity ) begin -- not sure what to put here end;
I am trying to create and update query to use as a trigger for updating information in a database which is dependent upon time.
I have a severity level which needs to be decreased in value after a set amount of time. the time of the action is recorded automatically on the creation of the the record. after an hour anything at severity level 2 needs to go up to 1, after 2 hours level 3 goes up to 2 and 3 hours level 4 goes up to 3
so far this is what I have
UPDATE calllog SET timedate = current_timestamp, severityid = severityid - 1 WHERE ((severityid = 2 and timedate >= current_timestamp + (1/24)) or (severityid = 3 and timedate >= current_timestamp + (2/24)) or (severityid = 4 and timedate >= current_timestamp + (3/24)))
I am not getting any errors back from this sql but it is not updating the relevent information. I am using one cell for time and date in format = DD-MON-YYYY HH24:MM:SS.
I am ceating a trigger to...when I update or insert a record in table and if salary of that record is less than 1600 than it should be updated to 2000. My trigger is
CREATE or REPLACE TRIGGER myTrigger BEFORE UPDATE OR INSERT ON newemp FOR EACH ROW BEGIN
[code]...
There are no errors with trigger while compiling, but when I update or insert a record, it does not update the table. It looks like the trigger is being ignored.
In the trigger I am calling a procedure that returns an error if there is any error returned from procedure. I have to update the table table1's column error_desc (for the same new inserted record for which the trigger was called) with the error received by OUT parameter of procedure called in trigger. I have to update the same record on whose insert this trigger was called.
We would like to create functions to insert and update our tables and would like to make it not possible to update and insert the table directly outside of the function. Is there a way to do that in the trigger?
CREATE OR REPLACE TRIGGER tri1 AFTER UPDATE ON dept FOR EACH ROW declare pragma AUTONOMOUS_TRANSACTION; BEGIN execute immediate 'create table dept_dum as select * from dept'; END; /
SQL> update dept set deptno=23 where deptno=10; update dept set deptno=23 where deptno=10 * ERROR at line 1: ORA-01031: insufficient privileges ORA-06512: at "SCOTT.TRI1", line 6 ORA-04088: error during execution of trigger 'SCOTT.TRI1'
I am running this as scott user
My requirement is to
create table as select * from table_name where flag=1
This has to be done parallel for all the tables for which this flag is enabled and by that trigger delete all those rows which were backed up as table.
Create table rqst_list(id Number, --(PK) pkg_name varchar2(100), status varchar2(100))
When a record is inserted into this table(rqst_list), a trigger is fired which calls the package which is there in pkg_name.The function does some function.If there are no exceptions while executing the package, then SUCCESS needs to be updated in the table for the id for which the trigger got fired.I have used AFTER INSERT ROW level trigger.
But,the final UPDATE (UPDATE the rqst_list table to SUCCES/FAILURE)to the base table inside the package is not happening.
create or replace view test_view as select 1 id,CONTRACT_REF_NO,chg_gl from test union all
[code]...
11 rows selected.
I have done only for one id.
so the problem is the front end is showing this test_view that people will modify.but they have to actually modify the table ,so I can think of an instead of trigger(instead of insert and instead of update ones).
create trigger on certain column for table structure.
SQL> desc MXMS_BF_TXN_DTL_T Name Null? Type ----------------------------------------- -------- ---------------------------- DOC_NO NOT NULL VARCHAR2(200) SEQ_NO NOT NULL NUMBER(24) GL_CODE VARCHAR2(200) TXN_NATURE VARCHAR2(200) TXN_TYPE_CODE VARCHAR2(200) [code].....
I need to collect new and old data whenever update statement fire on DOC_NO,POLICY_KEY,CRT_USER column.i have created only audit table for the above as below structure .
Name Null? Type ----------------------------------------- -------- ---------------------------- TIMESTAMP DATE WHO VARCHAR2(30) CNAME VARCHAR2(30) OLD VARCHAR2(2000) NEW VARCHAR2(2000)
Description:- TIMESTAMP is for when the modification happen. WHO is for username CNAME is for column which is modified OLD is for old value for the modified column New os for new value for the modified column
Using oracle 11.2.0.3 and wish to do the following.
Have trigger on table a on database a.
When a record is inserted into table a a record should be written first to table1 on database b , committed then a record written to table2 on database b as table2 has fk dependency on table 1.
How can we best achieve this.
Getting problems with the commit inside the trigger have tried pragma autonous transaction as well.
Get ora-02064 distributed transaction not supported when use the following code
create or replace trigger por_TRG_POP_IKNOW_MULTIPLE2
after INSERT OR UPDATE or delete on por_MULTIPLE
for each row
-- tO ENSURE I-KNOW KEPT UP-TO-DATE WITH HOMIS MULTIPLE -- delib not delet form i-know as if has been used by customer cannot delete -- due to referential inetgrity constraints in i-know -- Note parent_num updated on IKW via support.maintain_latest_dim_version.update_multiple until -- When IKW becomes master of multiple info, this trigger can be removed -- and support.maintain_latest_dim_version.update_multiple removed
declare PRAGMA AUTONOMOUS_TRANSACTION; v_dml_type varchar2(1); begin IF INSERTING OR UPDATING
[Code]....
--when matched THEN update set -- a.MGRP_NUM b.mult_link_multiple_num, -- MGRP_DESCRIPTION = (select mult_name from por_multiple -- where mult_code = mult_link_multiple_code
I'm trying to create a trigger so that whenever a record in the Employee table is deleted, a trigger will automatically delete corresponding records in the Job History table, then the Employee record is archived to EmployeeArchive before it is deleted. It compiles but with warnings. Here's what I've got.
I got a table table1 with 3 columns: id, name, value
im trying to create a procedure to update the table.
create or replace PROCEDURE TEST1 ( x IN varchar, y IN varchar, z IN varchar ) AS BEGIN update table1 set value=x where name=y and id=z; commit; END TEST1;
I would like to create a trigger on a table which populates a log table. In addition to using the table where the trigger will exist, I would like to populate a couple more fields in the log table with with data from 2 other tables.
e.g.
NAME_TABLE -reg_id -name
ADDRESS_TABLE *trigger to be fired when a new record is created here. -reg_id -srv_id
PROCESS_TABLE -srv_id -start_time -end_time
This is what I would like the logging table to look like:
create table test123 as (unit varchar2(5),qty varchar2(25)); insert into test123('ABC','10,40,50'); insert into test123('PQR','20,30,40,10'); insert into test123('XYZ','20,10,70');
I have a table called test123 which qty field. if the sum of qty is entered more than 100 or less than 100, it should throw error.
I wrote this trigger..but it is not working.
create or replace restrict_sum after insert or update of qty on test123 for each row declare v_sum number; [code].........
creating a stored procedure that updates the points column in the teams_tbl , the value that is updated in to the points column will be retrieved from the fixture_team table. so if team a has more goals than team b then the points column for team a will be increased by 6 else if the scores are equal they get 4 points each.
insert into test_compound values ('user1','1',systimestamp); insert into test_compound values ('user2','2',systimestamp-4); insert into test_compound values ('user3','3',systimestamp-6);
CREATE OR REPLACE TRIGGER trigger_test FOR UPDATE ON test_compound COMPOUND TRIGGER TYPE t_tab IS TABLE OF VARCHAR2(50); l_tab t_tab := t_tab(); [code].......
When I execute :
update test_compound set last_updated_on=systimestamp where userid='user1' and app='1';
The trigger should update the first row and all the data from test_compound table where userid='user1'. Maybe the problem is that updating the same table inside the trigger is firing in a recursive way the trigger.
I have one table with one row with some coefficients. If I update a coefficient from my table I want to be updated all the rows from another table. I've made a trigger but in the second table I have a column for example TOTAL and I want that column to be multiplied with my new coefficient, and I want this for every row in the second table. How I can select that total column in the trigger for every single row and update it?
