Can I have all the rows in a table updated at once in the merge statement?
MERGE INTO providermaster a
using
(
SELECT * FROM PROVIDERMASTER@INGEST) b
ON (b.MASTERPROVIDERID=a.MASTERPROVIDERID)
WHEN MATCHED THEN
UPDATE ....... I want to update all the other rows at once..
When I am executing merge statement I am getting the below error.
ORA-30926: unable to get a stable set of rows in the source tables
MERGE INTO TAN_LIST t
USING (SELECT * FROM (SELECT row_number () over (partition by TANNO order by null) rn,
dno,
TANNO,
SOL,
[Code]....
The query is fectching below data.
SELECT dno,TANNO,SOL,DESC,class,ct_dt,tcost
FROM MAT_LIST;
DNOTANNOSOLDESC CLASS CT_DT TCOST
63007565ADclass A A12345 08/28/131
[Code]...
Intially thers is no records in the TAN_LIST table. When I run the merge statemnt I am able to insert all 15 records into that table.
When I run the same merge statemment second time I am getting the below error.
ORA-30926: unable to get a stable set of rows in the source tables
So that I have used partition by cluase in the slect statement and I am able to resolve the error.
But it's inserting only 14 records not all 15. How to process all 15 records without the error..
write a query find which rows of a table is updated on 2 days before?
(OR)
In table there r so many rows write a query which two rows r updated last two day before?
{code{
i want to apply merge stmt on single table.
CREATE TABLE TEST11(TNO NUMBER(5), TVAL VARCHAR2(100), TID VARCHAR2(10));
INSERT INTO TEST11 VALUES(1,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(2,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(3,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(4,'VIJAYA','');
INSERT INTO TEST11 VALUES(5,'VIJAYA','');
[Code]....
My requiremen is if record is exists then i wan to update some value, if record not existes the i wan to insert new record
There are two tables like I posted below.I want a SQL query which selects all the rows from TABLE A which are not present in TABLE B. Also the select statement should pick all those rows which has updated value of COL_A2 in TABLE A.
TABLE A
COL_A1COL_A2
AAAMOBILE
BBBTABLET
CCCDESKTOP
DDDUNKNOWN
TABLE B
COL_B1COL_B2
AAAMOBILE
BBBUNKNOWN
CCCDESKTOP
The select statement should return following rows from TABLE A
COL_A1COL_A2
BBBTABLET
DDDUNKNOWN
In the following merge statement in the USINg clause...I am using a select stament of one schema WEDB.But that same select statement should take data from 30 schemeas and then check the condition below condition
ON(source.DNO = target.DNO
AND source.BNO=target.BNO);
I thought that using UNIONALL for select statement of the schemas as below.
SELECT
DNO,
BNO,
c2,
c3,
c4,
c5,
c6,
c7
[code]....
I have two tables with 113M records in DWH_BILL_DET & 103M in prd_rerate_chg_que and Im running following merge query, which is running for 13 hrs to update records, which is quiet longer time.
SQL> explain plan for MERGE /*+ parallel (rq, 16) */
INTO DWH_BILL_DET rq
USING (SELECT rated_que_rowid,
detail_rerate_flag_code,
rerate_sel_key,
[code].....
how to update or insert another (third table ) table with merge statement
View 6 Replies View Related how to use the MERGE Statement. actually I've used oracle Merge Statement before and it works very well. However today I tried to use and perform a command like that:
Merge into myTable mt using ( select 'data' field1, 'data2' field2, ect from dual
union
select 'data' field1, 'data2' field2, ect from dual
union
[code]...
This has not worked.What am I doing wrong?What could I do to solve this problem and axecute this statement sucessfully?
in Toad I am using this Merge statement , working accordingly.I want to use this merge statement in my form where can I use it.
I created a Procedure in Form Named Proc_merge and call it when validate item of :bankcode
PROCEDURE proc_merge IS
BEGIN
declare
v_com varchar2(5000);
BEGIN
V_COM := '
[code]...
when matched then
update set
trg.v_chq = src.cheque_no, trg.v_bankcode = src.bank_code ,trg.v_debit=src.debit, trg.v_credit=src.credit, trg.v_narration=src.narration
when not matched then
insert (trg.v_type, trg.v_no, trg.v_date, trg.v_chq, trg.v_bankcode, trg.v_debit, trg.v_credit, trg.v_narration)
values (src.voucher_type, src.voucher_no, src.voucher_date, src.cheque_no, src.bank_code, src.debit, src.credit, src.narration)
';
FORMS_DDL(V_COM);
end;
END;
no any result.
Table Name: F_SCENARIO
System : Dataware house
Oracle version : 11g
Record Count : 2 Million records
Correct scenario records
F_Key F_Bridge_key Record_type
1 1 1
2 1 2
3 1 3
Wrong scenario records
F_Key F_Bridge_key Record_type
1 1 1
2 -5 2
3 -6 3
I want to write a Merge statement to update the negative values into 1.
I am using Merge statement to copy data from one table to other,
merge into tabA a
using tabB b
on a.id = b.id
when match
update (
)
when not matched
(insert )
This is working all fine, as SQL, but when there is large volume, it blows out as there are intermediate commits for this ?
I have two tables have almost the same columns, how can I use merge statement to update the target table only when there is difference between source and target table. Is there any easier way not compare each column one by one? I am using Oracle 11.2
Here is the MERGE statement:
Merge into tb_trgt trgt using tb_src src
on (src.id = trgt.id)
when not matched then insert (trgt.id, trgt.nm, trgt.addr) values (src.id, src.nm, src.nm)
when matched then update set trgt.nm = src.nm, trgt.addr = src.addr
where trgt.nm <> src.nm or trgt.addr <> src.addr
;
Is there any easier way to specify the where clause in the NOT MATCHED? I don't want compare each column of the tables. Since I may have many columns in the tables.
I was reading about merge statement and tried some variations,
create table MERGE_TEST(
C1 number,
C2 varchar2(10 char),
c3 number);
insert into MERGE_TEST values(1, 'Name 3', 300);
insert into MERGE_TEST values(1, 'Name 2', 200);
insert into MERGE_TEST values(1, 'Name 1', 100);
commit;
[code]...
why is result different in this querys?
The following code is indicative of what I'd like to do (as in not correct at all ). Would there be a more immediate way to accomplish this other than executing a SELECT statement after the UPDATE?
-- Incorrect indicative example 1.
DECLARE
v_cur SYS_REFCURSOR;
BEGIN
UPDATE table1(f1, f2)
SET ('v1', 'v2')
WHERE f3 = 'v3'
RETURNING <updated_rows> INTO v_cur
END;
-- Incorrect indicative example 2.
DECLARE
v_cur SYS_REFCURSOR;
BEGIN
OPEN v_cur FOR
UPDATE table1(f1, f2)
SET ('v1', 'v2')
WHERE f3 = 'v3'
END;
the query ..
Below are the codes
create table testing1
(
id number,
data varchar2(20)
)
insert all into testing1 values (1,'100')
into testing1 values (2,'Ram')
[Code]....
I want the output as
100 Ram Pune
200 Shyam Mumbai
300 Kamal bangalore
mbr has 60,000 rows and member has 60,000 rows approx. two tables have indexes on ssn, and citi_no on them.
PK of mbr : mbr_id
PK of member : mbr_id
other columns are not PK, and have no index on it.
I'm wondering why the statment doesn't use index while ssn and citi_no have index.
MERGE INTO mbr t
USING (SELECT mbr_id,citi_no
FROM member) a
ON (t.ssn = a.citi_no)
WHEN MATCHED THEN
UPDATE SET t.asis_mbr_id = a.mbr_id
where t.ssn not in(select ssn from mbr group by ssn having count(*) > 1)
I am getting a (PL/SQL: ORA-00903: invalid table name) compile error in a procedure using a merge statement. I have seen many examples using this technique and am at a loss as to why I can't compile.
the pipelined function is:
FUNCTION f_crcli_pipe(pi_source_data IN sys_refcursor,
pi_limit_size IN PLS_INTEGER DEFAULT pkg_crcli_variables.c_cursor_limit_def)
RETURN CRCLI_AA
PIPELINED
PARALLEL_ENABLE(PARTITION pi_source_data BY ANY)
IS
[code].....
the error is pointing to the TABLE function in the USING clause of the merge statement.
I am using MERGE statement first time in my application but I am facing error.
begin
merge into store.comm_dept a
using factory_data.comm_dept b
on (a.cd_dcode = b.cd_dcode)
when matched then
[code]........
ERROR IS: encountered the symbol 'INTO' when expecting on of the following:
:=.(@%;
How am i able to combine multiple rows into one row without using cursor if possible. I am currently using SQLPlus.
My current result set:
user id|user name|group name
1|user1|group1
1|user1|group2
2|user2|group1
2|user2|group3
What i wish to achieve:
user id|user name|group name
1|user1|group1,group2
2|user2|group1,group3
I have problem with merging rows into view. I have created "INSTEAD OF" triggers on the view for insert/delete/update of rows. However, the merge is not working and it needs rowid to work. Is there any way how to make MERGE working here ? I must use merge, because I am changing the structure of database used for large java application. And it uses tons of merge commands,changing them to insert/update is inefficient because of development-time and of course resulting execution-time.
create table val_00 (
id number(10),
data varchar2(100),
constraint pk_val_00 primary key (id) validate
) organization index;
[code]....
CREATE TABLE emp
(
code NUMBER(4),
name VARCHAR2(15),
salary NUMBER(5),
ovt NUMBER(4),
sal_mon DATE,
dept number (3)
)
[code]....
9 rows selected.
Required Output is
CODE NAME SALARY OVT SAL_MON DEPTMerge Codes
---------- --------------- ---------- ---------- --------- ---------- -----------
1068 ALI 18500 2385 31-OCT-11 1021068,1793
1908 ASGHAR 17000 1900 31-OCT-11 1021908,1802
1960 ZAHID 16000 775 31-OCT-11 1021960,1952
1188 RAZA 9500 2910 31-OCT-11 1111188
1275 RAHIL 15300 3480 31-OCT-11 1111275,1176
Merge 02 rows of same department having sum(salary) <=20000. select those rows who have lower salary.
What is the easiest way to add 2 rows together? I need this results set below as is except I need rows with activity codes 0 and 30 to be merged together into Activity Code 0. So, Regular hours would be 7466.75. Do I need to do a Union or is there a more elegant solution?
My current sql results set looks something like this:
Activity Code Activity Code Desc REGULAR OT NONPROD DEPARTMENT
0 0: Business As Usual 7409.25 305.5 1603.25 Information Technology
10 10: Special Projects 190.75 17 0 Information Technology
20 20: Strategic Initiatives 1067 52 0 Information Technology
30 0: Business As Usual 57.5 0 0 Information Technology
and I want my new results to look like this:
Activity Code Activity Code Desc REGULAR OT NONPROD DEPARTMENT
0 0: Business As Usual 7466.75 305.5 1603.25 Information Technology
10 10: Special Projects 190.75 17 0 Information Technology
20 20: Strategic Initiatives 1067 52 0 Information Technology
I am writing below MERGE statement. In this cardinality between table_a and table_b is 1:2. I.e. each record in table_b corresponds to 2 records in table_a based on columns in ON clause.
Well this query throws below error.
----Error---
ORA-12801: error signaled in parallel query server P011
ORA-30926: unable to get a stable set of rows in the source tables
However, the same statement executes successfully when PARALLEL hint is removed altogether. (There are no duplicates in table_b based on unit,group,loc columns.)
-----Query--------
MERGE /*+ PARALLEL(8) */
INTO table_a a
USING table_b b
ON (a.unit = b.unit AND a.group = b.group AND a.loc = b.loc)
[Code]....
I have a merge statement in one procedure , this job runs on daily . It is running successfully since Jan-19-2010 and giving the below error now.
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcbgcur_9], [4224596], [1],
[4294967250], [2], [], [], []
It is giving error in the beginning of the MERGE statement.
How to handle the exception on below MERGE statement?
MERGE INTO COMM_EXSTS_COMIT_AGGR TARGET
USING
(
select * from ABC ) SRC
ON
(
SRC.COMMITMENT_ID = TARGET.COMMITMENT_ID
)
WHEN MATCHED THEN
UPDATE
WHEN NOT MATCHED THEN
INSERT ;
how to store total no of updated rows (number) in a variable after executing an updation query using script
View 2 Replies View RelatedI am using the below code to update specific sub-partition data using oracle merge statements.
I am getting the sub-partition name and passing this as a string to the sub-partition clause.
The Merge statement is failing stating that the specified sub-partition does not exist. But the sub-partition do exists for the table.
We are using Oracle 11gr2 database.
Below is the code which I am using to populate the data.
declare
ln_min_batchkey PLS_INTEGER;
ln_max_batchkey PLS_INTEGER;
lv_partition_name VARCHAR2 (32767);
lv_subpartition_name VARCHAR2 (32767);
begin
[code]....
When i am running the below merge statement it gives the error as below
MERGE INTO non_tab tt
USING (SELECT non_tab.acct,
non_tab.mis,
non_tab.n_gaap_skey,
non_tab.run,
non_tab.mit_ul AS t0,
CASE
WHEN (( CASE
[code]...
ORA-30926: unable to get a stable set of rows in the source tables.
If i inserted the values in table it gets inserting very few rows only.I dont know y it is?
View 15 Replies View Related