CREATE TABLE TEST11(TNO NUMBER(5), TVAL VARCHAR2(100), TID VARCHAR2(10));
INSERT INTO TEST11 VALUES(1,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(2,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(3,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(4,'VIJAYA','');
INSERT INTO TEST11 VALUES(5,'VIJAYA','');
[Code]....
My requiremen is if record is exists then i wan to update some value, if record not existes the i wan to insert new record
In the following merge statement in the USINg clause...I am using a select stament of one schema WEDB.But that same select statement should take data from 30 schemeas and then check the condition below condition
ON(source.DNO = target.DNO AND source.BNO=target.BNO);
I thought that using UNIONALL for select statement of the schemas as below.
I have two tables with 113M records in DWH_BILL_DET & 103M in prd_rerate_chg_que and Im running following merge query, which is running for 13 hrs to update records, which is quiet longer time.
SQL> explain plan for MERGE /*+ parallel (rq, 16) */ INTO DWH_BILL_DET rq USING (SELECT rated_que_rowid, detail_rerate_flag_code, rerate_sel_key,
I want to merge the following two sql statements into single output.
select id,count(*) from derailed where changed_on between to_date('26-july-13 18:30:00','DD-Mon-YY hh24:MI:SS') and to_date('01-August-13 18:29:00','DD-Mon-YY HH24:MI:SS') group by id;
how to use the MERGE Statement. actually I've used oracle Merge Statement before and it works very well. However today I tried to use and perform a command like that:
Merge into myTable mt using ( select 'data' field1, 'data2' field2, ect from dual union select 'data' field1, 'data2' field2, ect from dual union
[code]...
This has not worked.What am I doing wrong?What could I do to solve this problem and axecute this statement sucessfully?
I have two tables have almost the same columns, how can I use merge statement to update the target table only when there is difference between source and target table. Is there any easier way not compare each column one by one? I am using Oracle 11.2
Here is the MERGE statement:
Merge into tb_trgt trgt using tb_src src on (src.id = trgt.id) when not matched then insert (trgt.id, trgt.nm, trgt.addr) values (src.id, src.nm, src.nm) when matched then update set trgt.nm = src.nm, trgt.addr = src.addr where trgt.nm <> src.nm or trgt.addr <> src.addr ;
Is there any easier way to specify the where clause in the NOT MATCHED? I don't want compare each column of the tables. Since I may have many columns in the tables.
mbr has 60,000 rows and member has 60,000 rows approx. two tables have indexes on ssn, and citi_no on them.
PK of mbr : mbr_id PK of member : mbr_id
other columns are not PK, and have no index on it.
I'm wondering why the statment doesn't use index while ssn and citi_no have index.
MERGE INTO mbr t USING (SELECT mbr_id,citi_no FROM member) a ON (t.ssn = a.citi_no) WHEN MATCHED THEN UPDATE SET t.asis_mbr_id = a.mbr_id where t.ssn not in(select ssn from mbr group by ssn having count(*) > 1)
I am getting a (PL/SQL: ORA-00903: invalid table name) compile error in a procedure using a merge statement. I have seen many examples using this technique and am at a loss as to why I can't compile.
the pipelined function is:
FUNCTION f_crcli_pipe(pi_source_data IN sys_refcursor, pi_limit_size IN PLS_INTEGER DEFAULT pkg_crcli_variables.c_cursor_limit_def) RETURN CRCLI_AA PIPELINED PARALLEL_ENABLE(PARTITION pi_source_data BY ANY) IS
[code].....
the error is pointing to the TABLE function in the USING clause of the merge statement.
I am writing below MERGE statement. In this cardinality between table_a and table_b is 1:2. I.e. each record in table_b corresponds to 2 records in table_a based on columns in ON clause.
Well this query throws below error.
----Error---
ORA-12801: error signaled in parallel query server P011
ORA-30926: unable to get a stable set of rows in the source tables
However, the same statement executes successfully when PARALLEL hint is removed altogether. (There are no duplicates in table_b based on unit,group,loc columns.)
-----Query--------
MERGE /*+ PARALLEL(8) */ INTO table_a a USING table_b b ON (a.unit = b.unit AND a.group = b.group AND a.loc = b.loc)
How to merge multiple rows into single row (but multiple columns) efficiently.
For example
IDVal IDDesc IdNum Id_Information_Type Attribute_1 Attribute_2 Attribute_3 Attribute_4 Attribute_5 23 asdc 1 Location USA NM ABQ Four Seasons 87106 23 asdc 1 Stats 2300 91.7 8.2 85432 23 asdc 1 Audit 1996 June 17 1200 65 affc 2 Location USA TX AUS Hilton 92305 65 affc 2 Stats 5510 42.7 46 9999 65 affc 2 Audit 1996 July 172 1100
where different attributes mean different thing for each Information_type. For example for Information_Type=Location
Attribute_1 means Country Attribute_2 means State and so on.
For example for Information_Type=Stats
Attribute_1 means Population Attribute_2 means American Ethnicity percentage and so on.
I want to create a view that shows like below:
IDVal IDDesc IDNum Country State City Hotel ZipCode Population American% Other% Area Audit Year AuditMonth Audit Type AuditTime 23 asdc 1 USA NM ABQ FourSeasons 87106 2300 91.7 46 85432 1996 June 17 1200 65 affc 2 USA TX AUS Hilton 92305 5510 42.7 46 9999 1996 July 172 1100
I would like to check if the table contains invalid records. Col1 , Col2 and Col3 are seen as hierarchy levels and col1 is the top level.
For instance record 1,2,3 (level3) is valid because it exists record 1,2 (level 2). Moreover 1,2 record (level 2) is valid because it exists record 1 (top level). However 4,5 and 6,7,8 are not valid as higher levels are not completed.
How can I check in a single SELECT statement if the table contains invalid records? Maybe analitical functions or regular expressions?!
presenting the case as follows:There are two dates with time components like
26-sep-2010 13:00 and 29-sep-2010 19:00
In between these dates hours between 20.00 to 05.00 (night hours)need to be considered and In these night hours less than three hours can be ignored and between 3 to 9 hours should be treated as 1. Need the number of one's in between the dates.
Procedure, cursor solution is not needed and need single select statement.
I want to run multiple IF Else statements in a single select SQL, each statement is one SQL operating on the same table, what is the best way to write this select SQL query ? If it is PL/SQL, when i get the result from the first IF statement I will skip the remaining execution, and so on..
I would like to insert a value if that value is not existing in the table (example for a column which contains date only new dates should be inserted and if the date already exists in the column then it needs to get updated )
example of scenario...
date s1 s2 s3
in the above if the date is new..it should get inserted with the appropriate slot no.(s1,s2,s3) if the date already exists it needs to update the no.in slot no.
Updating multiple ROWS with different values using single statement. Requirement is to update one column in a table with the values in the other table.
Say we have 3 tables, CORPORATION,CORPORATE PROFILE and MEMBER.
Each MEMBER has CORPORATE PROFILE which in turn is associated with CORPORATION. Now I need to update MEMBER table with CORPORATION identifier for members who belong to corporations with identifiers say 'ABC' and 'DEF'.
MEMBER table contains column 'CORPIDENTIFIER '. CORPORATEPROFILE table contains MEMBERID and CORPORATIONID,this will associate a member with the corporation. CORPORATION table contains ID and CORPIDENTIFIER.
Using the below query I am getting error,ORA-01427:single-row subquery returns more than one row
UPDATE MEMBER M SET M.CORPIDENTIFIER= (SELECT A.IDENTIFIER FROM CORPORATION A,CORPORATEPROFILE B WHERE B.CORPORATIONID=A.ID AND B.MEMBERID=M.ID AND (A.IDENTIFIER LIKE 'ABC' OR A.IDENTIFIER LIKE 'DEF'))
Sub query in the above query returns multiple rows and hence it is throwing the error.More than one members are associated with Corporations ABC and DEF. Is there any way possible to update all the rows in single query with out iterating the result set of sub query.
I have two tables eim_asset and eim_asset1.I want to update the table eim_asset1 using the following update SQL (Or Logic)
update eim_asset1 set emp_emp_login = (select login from s_user where row_id in (select row_id from s_emp_per where row_id in (select pr_emp_id from s_postn where row_id in (select position_id from s_accnt_postn where ou_ext_id in (select row_id from s_org_ext where row_id in (select owner_accnt_id from s_asset where owner_accnt_id is not null)))))
It gives me the ORA error : ORA-01427:single-row subquery returns more than one row.know why I am getting it, because of the one-to-many relationship between owner accounts and their assets.
how can i track the exception for three select statement in one pl-sql block. here is synario.......
begin select * from emp where empno=1234; --statement 1 select * from cusotmers where cust_id=125; --statement 2 select * from products where product_id='a-3'; --statement 3 end;
i want to track exception any one for ex no_data_found for all these three different statement.
I know if i put this three statement in three different pl-sql sublock then i can trap it....
