SQL & PL/SQL :: Tracking Exception In One Single Block For Three Different Select Statement?

Mar 8, 2010

how can i track the exception for three select statement in one pl-sql block. here is synario.......

begin
select * from emp where empno=1234; --statement 1
select * from cusotmers where cust_id=125; --statement 2
select * from products where product_id='a-3'; --statement 3
end;

i want to track exception any one for ex no_data_found for all these three different statement.

I know if i put this three statement in three different pl-sql sublock then i can trap it....

how can i trap it in one single block?

View 4 Replies


ADVERTISEMENT

PL/SQL :: What Kind Of Exception Can Raise A Select Statement Excluding NO_DATA_FOUND

Oct 23, 2013

what kind of exception can raise a select statement excluding NO_DATA_FOUND; For example i try to run the following: select * from departments where departments_id=11; In a situation like that what kind of error oracle can raise?I'm asking this because i have some procedure that just do a select statment and i want to know if there is a valid reason to put the exception others at the end of the procedure.

View 25 Replies View Related

PL/SQL :: Single Select Statement

Apr 22, 2013

I am trying to find the best solution for the following problem

I have a table called HIERARCHY with 3 columns.

col1 col2 col3
------------------------
1
1 2
1 2 3
4 5
6 7 8

I would like to check if the table contains invalid records. Col1 , Col2 and Col3 are seen as hierarchy levels and col1 is the top level.

For instance record 1,2,3 (level3) is valid because it exists record 1,2 (level 2). Moreover 1,2 record (level 2) is valid because it exists record 1 (top level).
However 4,5 and 6,7,8 are not valid as higher levels are not completed.

How can I check in a single SELECT statement if the table contains invalid records? Maybe analitical functions or regular expressions?!

View 5 Replies View Related

SQL & PL/SQL :: Single Select Statement Instead Of Procedure?

Oct 2, 2010

presenting the case as follows:There are two dates with time components like

26-sep-2010 13:00 and 29-sep-2010 19:00

In between these dates hours between 20.00 to 05.00 (night hours)need to be considered and In these night hours less than three hours can be ignored and between 3 to 9 hours should be treated as 1. Need the number of one's in between the dates.

Procedure, cursor solution is not needed and need single select statement.

View 5 Replies View Related

PL/SQL :: Multiple IF Else Statement In A Single Select?

Oct 17, 2012

I want to run multiple IF Else statements in a single select SQL, each statement is one SQL operating on the same table, what is the best way to write this select SQL query ? If it is PL/SQL, when i get the result from the first IF statement I will skip the remaining execution, and so on..

View 9 Replies View Related

Forms :: Implement Exception Handling In Exception Block Of A Trigger

Oct 10, 2011

I have to implement exception handling in the exception block of a trigger, Quote:exception

when ora_java.java_error then
message( 'Unable to call out to java, ' || ora_java.last_error );
ORA_JAVA.CLEAR_EXCEPTION;

when ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message( Exception_.toString(ex));
-- lv_exception := Exception_.getMessage(ex);

I get an error for the line: 'message( Exception_.toString(ex));'I have imported the java classes FException et IObject with their methods.

I have to create a Web Service Client, so I wonder if the paragraph Quote:when ORA_JAVA.EXCEPTION_THROWN then ex := ORA_ JAVA. LAST_ EXCEPTION; is mandatory.

View 2 Replies View Related

Difference Between Backup Optimization And Change Tracking Block?

Sep 5, 2012

I am studying about these two technologies and the only difference that I found was that optimization doesn't backup the duplicated archivedlogs.

If both ignore not changed blocks, what is more effective?

The optimization backup also has some tracking file?

View 1 Replies View Related

Backup & Recovery :: Block Change Tracking File

Sep 10, 2011

does, block change tracking file is read during incremental level 0 backup?

View 4 Replies View Related

Backup & Recovery :: Enabling Block Change Tracking?

Jun 20, 2012

i want to enable block change tracking as our incremental level1 backup take a lot of time but i have a worry which i found it on oracle support and tha is as follows Database Instance Hang at Database Checkpoint With Block Change Tracking Enabled. [ID 1326886.1]

View 2 Replies View Related

Backup & Recovery :: Block Change Tracking File When It Is Used

Oct 11, 2011

i did such commands

1. RMAN -> backup incremental level 0 database;

2. SQLPLUS -> alter database enable block change tracking using file '/home/oracle/block_change_tracking.tr';

3. RMAN -> backup incremental level 1 cumulative database;

4. RMAN -> backup incremental level 1 cumulative database;

5. RMAN -> backup incremental level 1 cumulative database;

and for such order i noticed that block change tracking file wasn't used for any cumulative backup. for each cumulative backup was done full scan over database.

it was used after i did incremental level 0 backup, and again incremental 1 cumulative.

if i want this feature to be usefull i should enable it before my incremental level 0, or i should do incremental level 0 immediately after i enable it?

View 6 Replies View Related

SQL & PL/SQL :: Have Exception In Declare Block

Feb 20, 2012

Can we have any exception in DECLARE block (shown are just for example)?

Declare
exception occured
begin
code
end;

declare
variables;
begin
declare
variables;
begin
code;
end;
end;

View 6 Replies View Related

SQL & PL/SQL :: How To Get Statement That Causes Exception

Jul 17, 2011

I am using Exception when others then body end;

inside the body i can get SQLCODE and SQLERRM but I also need to get the SQL statement that caused the error and I dont know how.

View 39 Replies View Related

PL/SQL :: Exception Handling In Insert Statement

Jul 17, 2012

Here's sample code :

declare
i number;
l_rec number;
cursor c1 is select i from t1;
begin
[code]....

After executing Data must be inserted into t2..If any error is there it should insert into t2 with status 'E' and move on T2

i fflag
---------
11 E
111 Y
1111 Y

The code above is failing after inserting 11 E into t2 table

View 5 Replies View Related

How To Get SQL Statement That Caused Exception In Oracle Function

Jul 18, 2011

I am trying to search a way to get the SQL statement that caused an exception withing an oracle function.
I tried:

SELECT sql_text
from v$session ses, v$sql sql
where sql.sql_id = ses.prev_sql_id
and ses.sid = sys_context('userenv','SID') AND ROWNUM = 1;

but this doesn't always return the last statement that the function has executed. if needed i can send the complete script for the function and its tables and stored procedures for testing.

View 3 Replies View Related

PL/SQL :: How To Implement Exception Handling On MERGE Statement In Oracle10g

Jul 19, 2012

How to handle the exception on below MERGE statement?

MERGE INTO COMM_EXSTS_COMIT_AGGR TARGET

USING
(
select  * from   ABC ) SRC
ON
(
SRC.COMMITMENT_ID = TARGET.COMMITMENT_ID
)
WHEN MATCHED THEN
UPDATE
WHEN NOT MATCHED THEN
INSERT ;

View 4 Replies View Related

SQL & PL/SQL :: Select Statement From Schemas In MERGE Statement In USING Clause

Sep 13, 2013

In the following merge statement in the USINg clause...I am using a select stament of one schema WEDB.But that same select statement should take data from 30 schemeas and then check the condition below condition

ON(source.DNO = target.DNO
AND source.BNO=target.BNO);

I thought that using UNIONALL for select statement of the schemas as below.

SELECT
DNO,
BNO,
c2,
c3,
c4,
c5,
c6,
c7
[code]....

View 5 Replies View Related

SQL & PL/SQL :: SELECT Will Raise NO_DATA_FOUND Exception

Feb 10, 2011

I was going through the link: URL....Here within the box under the title 'Exception Handling -- Quick Facts and Tips', it states, Once you have handled an exception, normal program execution continues. You are no longer in an "exception" situation.

I wanted to verify this and used the below:The DDL and DMLs:

CREATE TABLE emp(empno NUMBER(4), ename VARCHAR2(10));
INSERT INTO emp VALUES(7369,'SMITH');

The program:

DECLARE
x VARCHAR2(10);
BEGIN
SELECT ename INTO x FROM emp WHERE empno=4567;
SELECT ename INTO x FROM emp WHERE empno=7369;
DBMS_OUTPUT.PUT_LINE(x);
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('ERROR OCCURED');
END;

The first SELECT will raise NO_DATA_FOUND exception. Even though I have handled it, the second SELECT is not executing.But the link says, that normal program execution will continue. So, Iam expecting the second SELECT statement to work.

View 4 Replies View Related

SQL & PL/SQL :: Select Dynamic Column Names In Select Statement In Function?

Jul 4, 2010

i want to select dynamic column names in my select statement in my function.

View 4 Replies View Related

SQL & PL/SQL :: Select Statement Is Blocking A Delete Statement

Jan 11, 2012

I am using JDBC to run a few queries from my Java program (multi-threaded one).I am facing an issue where a select statement is blocking a delete statement. From the java code point of view, there are 2 different threads accessing the same tables (whith different DB connection objects).

When the block occurs (which i was able to find out from the java thread dump that there is a lock on oracle), the below is the output:

SQL> SELECT TO_CHAR(sysdate, 'DD-MON-YYYY HH24:MI:SS')
2 || ' User '||s1.username || '@' || s1.machine
3 || ' ( SID= ' || s1.sid || ' ) with the statement: ' || sqlt2.sql_text
||' is blocking the SQL statement on '|| s2.username || '@'
4 5 || s2.machine || ' ( SID=' || s2.sid || ' ) blocked SQL -> '
6 ||sqlt1.sql_text AS blocking_status FROM v$lock l1, v$session s1, v$lock l2 ,
7 v$session s2,v$sql sqlt1, v$sql sqlt2
8 WHERE s1.sid =l1.sid
9 AND s2.sid =l2.sid AND sqlt1.sql_id= s2.sql_id
AND sqlt2.sql_id= s1.prev_sql_id AND l1.BLOCK =1
10 AND l2.request > 0 AND l1.id1 = l2.id1 AND l2.id2 = l2.id2;
[code]...

From the above it can be seen that a select statement is blocking a delete. Unless the select is select for Update, it should not block other statements is not it ?

View 10 Replies View Related

SQL & PL/SQL :: Why Blind Select Is Better Than Conditional Select Statement

Dec 29, 2010

Why Blind select is better than Conditional select Statement?

View 10 Replies View Related

Forms :: Delete Detail Block Single Record

Apr 22, 2010

My form consist two datablock cust_mstr,cust_dtls, each customer code consists two or three contact details records, when i delete the single detail record instead of deleting single record it deletes all the details records from cust_detail table.

Here by i attaching my form for your reference pls find the code in delete button

View 12 Replies View Related

Forms :: Query Records Of Detail Block Displayed In Single Row

May 30, 2010

I have a Master block and a Detail Block. They are related using two columns, Document_ID and Page_no. I want to display all the records in master table with corresponding detail records beside them in single line. i.e., as shown below:

MasterItem1 DetailItem1 DetailItem2 DetailItem3

I created the relation between them and executed query. When I execute query in the form, I can find that all the Master Items are displayed in vertical records, but i can only see one record of detail fields. They are displayed as shown below:

mitem1-value1 ditem1value1 ditem1value2 ditem1value3
mitem1-value2
mitem1-value3
mitem1-value4

When the navigate down in master items, then the corresponding detail values are being shown on the same first record.

View 1 Replies View Related

Forms :: How To Disable Single Record In Multi Non-database Block

Mar 28, 2011

The main qn is in the subject line.

I have used the following code

GO_BLOCK('CHILD_BLK');
FIRST_RECORD;
LOOP
IF NVL(:CHILD_BLK.SELECT_FLAG,'N')='Y' THEN
V_REC_NO := GET_BLOCK_PROPERTY('CHILD_BLK',CURRENT_RECORD);
SET_ITEM_INSTANCE_PROPERTY('CHILD_BLK.ASSET_DESC',
V_REC_NO,

[code]....

View 5 Replies View Related

How Much Block Will Be Read From Disk When A Single Oracle Io Call Occurs

Jul 10, 2012

The block size of my db(10gr2) is 8k, and the db is on the raw device file system on a aix machine.

OS block size is 512k.

How much block will be read from disk when a single oracle io call occurs? Which one is currect, 8K or 512K?

If the block size for a single io call depends on the os block size (512k), I think os block size need to be tuned for oracle block size (8k). If we use raw device file system, os level block size has no meaning?

View 1 Replies View Related

SQL & PL/SQL :: Confirmation Of Statement Execution In Block

Jul 12, 2010

I have a set of sql statements which i have to execute inside a pl/sql block. But i need to know the response of each statement and confirmation whether it is executed successfully.

Practically i need to get info as such in sqlplus status msg for each sql statement

E.g. :
SQL> insert into test values(1);

1 row created.

or similar to this.

View 7 Replies View Related

PL/SQL :: Add Another FETCH INTO Statement In While Loop Block

Jul 12, 2012

I execute the below code in TOAD.

DECLARE
CURSOR c1
IS
SELECT *
FROM tab
WHERE ROWNUM < 5;
[code]....

If I add another FETCH INTO statement in the while loop block ,I will get the output.why I am getting this error exactly and how another FETCH INTO is preventing it.

View 10 Replies View Related

SQL & PL/SQL :: Implicit Cursor In Single Statement?

Feb 7, 2011

1) SQL Statements are not using IMPLICIT CURSORS.

2) Only the SQL statements of the PLSQL program create implicit cursors.

View 1 Replies View Related

PL/SQL :: Merge Statement On Single Table

Oct 29, 2012

{code{

i want to apply merge stmt on single table.

CREATE TABLE TEST11(TNO NUMBER(5), TVAL VARCHAR2(100), TID VARCHAR2(10));
INSERT INTO TEST11 VALUES(1,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(2,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(3,'VIJAYA','TEST');
INSERT INTO TEST11 VALUES(4,'VIJAYA','');
INSERT INTO TEST11 VALUES(5,'VIJAYA','');

[Code]....

My requiremen is if record is exists then i wan to update some value, if record not existes the i wan to insert new record

View 3 Replies View Related

SQL & PL/SQL :: Insert Into Statement Doesn't Insert All Rows Return By Select Statement?

Jan 12, 2011

If i inserted the values in table it gets inserting very few rows only.I dont know y it is?

View 15 Replies View Related

Forms :: How To Insert And Update With Single Statement

Mar 5, 2012

I would like to insert a value if that value is not existing in the table (example for a column which contains date only new dates should be inserted and if the date already exists in the column then it needs to get updated )

example of scenario...

date s1 s2 s3

in the above if the date is new..it should get inserted with the appropriate slot no.(s1,s2,s3) if the date already exists it needs to update the no.in slot no.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved