My form consist two datablock cust_mstr,cust_dtls, each customer code consists two or three contact details records, when i delete the single detail record instead of deleting single record it deletes all the details records from cust_detail table.
Here by i attaching my form for your reference pls find the code in delete button
I have a Master block and a Detail Block. They are related using two columns, Document_ID and Page_no. I want to display all the records in master table with corresponding detail records beside them in single line. i.e., as shown below:
MasterItem1 DetailItem1 DetailItem2 DetailItem3
I created the relation between them and executed query. When I execute query in the form, I can find that all the Master Items are displayed in vertical records, but i can only see one record of detail fields. They are displayed as shown below:
mitem1-value1 ditem1value1 ditem1value2 ditem1value3
mitem1-value2
mitem1-value3
mitem1-value4
When the navigate down in master items, then the corresponding detail values are being shown on the same first record.
I'm having a multi-record detail block in my form and after querying the form, when I scroll through the scroll bar, it is hanging (freezing) just before reaching the last record.
I have noticed that it never hangs if I use arrow keys to scroll between the records. It only hangs when I use scroll bar or page down key.
Regardless of the number of records fetched, it only hangs when I click the scroll bar (or press page down key) to fetch the last record.
It happens to all my custom forms and I'm developing this for Oracle EBS Apps 11.5.10.2. Oracle JInitiator Version is 1.3.1.21 and my form builder is Forms 6.0.8.28.0.
I have multirecord block and I want to disable Inserting/Updating/Deleting more then one record at a time.
View 32 Replies View RelatedThe main qn is in the subject line.
I have used the following code
GO_BLOCK('CHILD_BLK');
FIRST_RECORD;
LOOP
IF NVL(:CHILD_BLK.SELECT_FLAG,'N')='Y' THEN
V_REC_NO := GET_BLOCK_PROPERTY('CHILD_BLK',CURRENT_RECORD);
SET_ITEM_INSTANCE_PROPERTY('CHILD_BLK.ASSET_DESC',
V_REC_NO,
[code]....
i have a master detail form, In Master block we have one field cheque amount and in Detail block we have field receiveable amount invoice wise. if company paid us a cheque amount we will enter this amount in Master block field Cheque amount and in detail block there will be invoice wise receivable amounts. i want to distribute the cheque amount in detail block invoice wise for example
Cheque amount in master block = 291
Invoice wise receiveable amount is as follows
Invoice No , receivable amount , Received amount
10, 196 , 0
20 , 95 , 0
30 , 54 , 0
Result should be as follows:
Invoice No , receivable amount , Received amount
10, 196, 196
20 , 95 , 95
30 , 54, 0
Received amount field should be distributed according to the receivable amount when recevied amount = cheque amount then remaining will be 0.
I have an existing form which i need to customize..In the form in the query block whatever strings we enter..and press the search button..it sets the where clause and use execute query.which populates the detail block which is read only and only 1 column is enabled.
For the Enabled column X I need to enable a button.It has to be done only if the cursor go in the column X
I've a master detail form. I detail form there is no primary key. When it is executed the following error displayed :
FRM-30100: Block must have at least one primary key item.
Block: ASSETS_ISSUE_DTL
Form: FORM_ASSETS_ISSUE_DTL
I have face a problem with master detail block,
we have two tabular block first one is master and sencond one is detail when we insert detail item it proper work and when when move next record in master block then it ask for save, I want to user enter all record and when he save with button then it save other wise no. but when he move any record in master block all realted record show in detail block.
i made a master-deatil data block and when i completed all field on master-data block i can`t move to data block detail.
when i press (TAB OR ENTER) on last field, the cursor go back to first field.
how to integrate exel with oracle forms ? so that it looks like a detail block.
and how to change the number of records displayed in a detail block at run time?
if i give 20 in text item and if i click on a button then the detail block should display 20 records.
in set_block_property there is no property for records_displayed. but in get_block_property we have it.
I have detail block in my form and i need to give option to user to search item in that block.
For example I display 100 items from item master and user need to search particular item by either code or name.
KEY_DUPREC is not working in a detail block.What description should i write and where to enable duplication of columns while pressing F3.
View 2 Replies View RelatedWe have a master detail form block A (master) contains an item, this item is in the record group's where-clause used to fill a list item on block B (detail block) (database item) we fille the list item in a pre-record trigger on the master block this works fine but when we navigate through the records in block a we intermittently get the following error : FRM-41337 : cannot populate the list from record group;
how should we filll our list item, in which trigger (when-new-record-instance of master block doesn't work correctly, the list item only gets filled after clicking it twice)
I have form with master detail relation ship (invoicing form) the detail block is tabular, displaying upto 7 records...
Now my clients wants to show the serial number along with each record while feeding the data (this includes when insert, editing, deleting / clearing records) he wants to see the serial number as in MS access / MS techniques.
I tried to use the system variable to use :system.cursor_record; but this dose not works.(in insert/edit/delete/clear record)
Is it possible to display the detail block (different canvas) in the master block canvas, but when finished entering data into master block and a button is pressed? And i want to use some conditions in the when-button-pressed trigger. based on that it should show different canvas.
simply speaking, my aim is to use the upper part of the screen to show master block and the lower part for a detail block from the different detail blocks based on condition checked in when-button-pressed trigger.
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
can we use set_block_property to program to switch multiple relationships. for example
if true then use relationshipA
else relationshipB
end if;
I have problem with the form when i pass from the master to detail block the form stop working and it stops responding even if i am in the next detail block and i press tab to change from one record to another the form will say working and it stops responding.
View 2 Replies View RelatedI have a master - details block relation where I have to display all the records in the details block based on the selection criteria made in the master block. Earlier we didn't have any selection criteria and hence used to do a execute_query behind the detail block to just retrieve all the records.
But now the master block contains fields where I can input the selection criteria and once I hit the find button it will retrieve the records based on those criteria and display in the detail block.
I have create Master block and a Detail block.When i am clicking on the Master block, then details records are displaying.But when i m moving from 1st record of detail block to 2nd record of master block, then detail block's data is not not displaying.It just firing the validation of detail block's first field.
when from Detail block (Cursor on the field Mapping code field) clicking on the 2nd records i.e Ord.No. =2 , at that time validation is getting fired.)
What i really wants that if click on the 2nd record of Master, automatically records should display in detail block.
I got the following scenario.
- A Master/Detail form which is called from previously saved table.
- In the detail form, user is allowed to insert list of data from other block into the current detail form. For that I have one when_button_pressed with the following script define :-
Begin
go_block('ACT_VW_QT_ACTV'); <----- query block
FIRST_RECORD;
IF :BLOCK44.ITEM45 IS NOT NULL THEN
:BLOCK44.ITEM45:=:BLOCK44.ITEM45|| ' OR ';
END IF;
[code].......
When this is none, nothing being happened on the current block ( 'ACT_QT_TXN1'), I think it is because of the master/detail link where it always looks back the original link data. I think this is very common problem but I just can't figure out how to go about it.
I have master detail block just consider Forms A as a master and Forms B as a Detail,when my cursor is in form A i try to save the record, it is saved Form A and putting Form B data as null, i have to put a validation to stop this activity, i have to inform the user "Provide values for form B text item",
I created a post block trigger in form A
Begin
If (:FORM-B.TEXT1 is null)l or( :FORM-B.TEXT2 is null)
then
Message( 'provide value for FORM-B');
Message( 'provide value for FORM-B');
raise form_trigger_failure;
ELSE
NULL;
END IF
END;
Im Getting error message and navigation got stopped in last item of form A itself,i need to show error message and cursor control should move to first item of form -B which trigger i have to use for this.
MASTER-DETAIL FORM HAVING AN LOV IN THE MASTER .LOV SELECTS THE PRIMARY KEY FIELD FROM THE MASTER TABLE AND IN LOV PUSHBUTTON HAVING A TRIGGER WHEN BUTTON PRESSED
Declare
bool boolean;
begin
bool := show_LOV('PURCHASELOV');
[code]...
WHEN SELECTING THE ITEM THROUGH LOV IT EXECUTES ALL VALUES BUT AFTER CHANGING ANY DATAS THEN NEW RECORD IS CREATED IN THE MASTER TABLE AND NO CHANGES OCCURED TO THE CHANGED RECORD.
1. My detail form has part number as one of the fields and I want to make sure the user can enter a part number only once. How can I make sure user cannot enter it more than once?
2. I want to limit number of detail records for every parent record to 8. How can I accomplish this?
3. I have approval flags at both master and detail. If the user tries to approve the master with some/all detail records unapproved, system should display error message and make the user approve the detail before approving the master.
ora-00000 normal successful completion error while populating data from Master block to Detail block in Oracle Forms 11g.
View 6 Replies View RelatedI am loading data file using SQL Loader in TOAD 10.5.1.3 in Oracle 10g using the control file below and loading data into 2 tables post1.thead and post1.tdetl. THEAD contains item level transaction and TDETL is detail level when a transaction has a discount or promo attached to for that item. When the
LOAD DATA
APPEND
INTO TABLE post1.thead
WHEN (1:5) = 'THEAD'
TRAILING NULLCOLS
(file_type POSITION(1:5)CHAR,
[code]....
A particular THEAD value may have 0, 1 or many TDETL corresponding values.below is a sample data file. When the position 21 in the TTAIL has a value of 1 or 2, then we know that there is a promo or discount applicable to the ITEM (THEAD).
THEAD0000000002201109142011091400000000000002091 1 0 -1
TTAIL0000000003000000
THEAD0000000012201109142011091400000000000002091 1 0 -1 20110914-1
TDETL0000000013CMPSPL1004 0 000000010000P0000000000000019990000000000000000200000
TTAIL0000000014000001
THEAD0000000021201109142011091400000000000002091 1 0 -1
TDETL0000000022EMPDSC1005 0 000
TDETL0000000023SCOUP 1006 0 973452 000
TTAIL0000000024000002
What I want to acheive is to accurately reflect a TDETL to its corresponding THEAD, as both THEAD and TDETL are loaded into separate tables. How can we have the 2 records correlated?
i m using oracle 10g forms
in one form
there are multiple records shown in this form
i m using one delete button
coding is
declare
v_yes_no varchar2(1);
begin
v_yes_no:=display_alert2('alert_2','Caution','Do you want to delete current record');
[Code]...
but when i press this button then one message shown on secreen
you can not delete this record
when i debug the form
message shown through on error trigger
i can not understand why this message ocuured
and record not deleted
no any constraint use in this form
but if i delete record from backend then records delete successfully
when i tried to delete the record by clicking the delete button which has the trigger code as
delete from emp where employee_id=:e_id; commit;
it wasn't. and showed the message as
---FRM-40508: ORACLE ERROR: Unable to INSERT record.
if i change the EMP ID item property "database item" to "NO"..then i can able to delete the record..but, now i am unable to insert the record form the same form...
this is just the continuation of my previous topic,
After I bound data into the textboxes, now I want to delete it when I mistakenly click on the same data twice.
this is my screenshot: